Washer Water Pump WPW10661045

Hi Joseph, Thank you for the question. I suggest testing the Lid Latch Assembly, PartSelect Number: PS3497627. If the switch is defective it will not allow the appliance to go into spin and drain. To test the switch, first and foremost disconnect your water and the power from your appliance before starting. Locate where your switch actually fits on to your appliance and place a magnet between them. Now there will be a magnetic connection between the lid switch and solenoid. After you do that, put the lid of the washer back on and turn on the appliance. If the appliance turns off, disconnect power once more and reposition the magnet. Caution. If you are at all uncomfortable with doing something like this, I would strongly suggest contacting a repair technician to come and help you. I hope this helps.

Hello Joan, thank you for writing. For this symptom you will want to consider either the Water Pump, the Washer Drive Pulley, or the Agitator Repair Kit. The model number you provided is partial with multiple variations using some different parts. We will need the rest of the model number to look into the correct replacements. The missing information is a number at the end of what you provided.

Hello Billy, thank you for contacting us. This could be due to either a faulty Washer Drive Pulley part number PS10057144 or Drive Belt part number PS11747978 for your model. I hope this helps and good luck with your repair!

Good Day Cristian. Thank you for your question in regards to your unit (Model Number MVWC415EW0). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Lid Latch Assembly (PartSelect Number PS3497627). 2) Lid Latch Strike (PartSelect Number PS11750882). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

Hello Betty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS2342445 for the Drain Pump and PartSelect Number PS3508101 for the Shock Absorber Kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello David, thank you for contacting us. The issue is most probably related to the drain pump, part number PS11757016. We would also recommend cleaning the drain filter and the drain hose to ensure that these are not clogged. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service. We hope this helps!

Hi Norma, thank you for your question. There are a few parts that you should check when you are having this issue. The pump would be the first part to check. You should also check your switch and water inlet valve as well. I hope that helps. Good luck with your repair.