Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
The Dual Radiant Surface Element with Limiter is an essential OEM replacement part for ranges, designed to provide consistent heat to the cooking surface. This element features a dual radiant design, which allows for greater versatility in cooking by efficiently distributing heat across a wider area. It is equipped with a limiter to protect against overheating, ensuring safe and reliable operation. When replacing the surface element, it's critical to disconnect the range from the electrical power supply by either unplugging it or turning off the house circuit breaker to avoid electrical hazards. Always verify compatibility with your specific model before purchasing, as variations in size and shape may exist. Be sure to handle the element carefully, as it may have sharp edges. For added safety, wear work gloves during installation and follow the manufacturer’s instructions to ensure a secure and proper fit.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William A - October 3, 2020
Verified Purchase
Easy repair, saved me money.
The part was in great condition and easy to install.
★★★★★
★★★★★
JEANNE H - August 26, 2020
Verified Purchase
Good product.
The part was great and arrived quickly but didn't solve the issue. May have to order the back burner also.
★★★★★
★★★★★
Brian W - December 8, 2021
Verified Purchase
Great service , Quick delivery !!
my appliance part works as it should
★★★★★
★★★★★
Carol C - August 11, 2018
Verified Purchase
Wrong Element
The part sent absolutely is not the right part. It is not the same as my Maytag Gemini. I will be returning.
August 13, 2018
Hello ,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Brian M - October 13, 2018
Verified Purchase
Not the right part
The part I ordered is not the right part for my stove
October 15, 2018
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner out
I didn't repair anything because you sent me the wrong part! I submitted a claim to return it and it's been a week, and I have heard nothing from you. Horrible customer service, I'll be calling today.
Daniel from IONE, CA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
center of duel element burner was not working
replaced burner by following the wiring from the photo we took. worked god except was cooking to hot and would not cycle. went to use my smaller burner in the back on the same side and the center of the double came on. so we watched another video looked at what we did wrong with the wiring. here we wired the burner slightly wrong we d
... Read moreid not follow the numbering. this time followed the numbering and all is good. burner is working good and cycling.
Read less
Candi from COLUMBIA STA, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual radiant broken
My genius scientist husband responsible all electric string connections, I responsible buy right parts and all support work, we worked as a team and fix the problems:) :)
Yi from WOBURN, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large element on stove top burned out
The replacement unit was a substitute part. Wiring slightly different. Instructions bare minimum. Follow instructions and it does work. No instructions as to how to remove the stove top. Been there before so sort of knew how. Nothing in the Jenn Air manual for stove top removal. The control panel has to be removed, two screws on ea
... Read morech side and four hex screws on bottom, this allows for the disconnect of wiring for the top. Remove the two trim pieces one on each side. One screw at top and one at bottom. The trim piece will move towards the rear and come off. Two screws on each side and two in the back will release the top. Remove top and lay on padded surface. You are ready to replace unit.
Read less
Betty G from MOSCOW, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inner Element Would Not Heat
I did not mark wires with their associated numbered connections on the old burner but I did take pictures prior to removing the old burner. This slightly complicated finding the right connections for the wires on the new burner but the photos taken were invaluable in doing so. The placement of burner connections between new and old was
... Read moredifferent. Additionally, there were 2 connections on new and old that were not numbered. These turned out to be the power to the inner and outer coils and their connections were determined by examining the burners and connecting accordingly. Also, not mentioned in the instructions was a light on the new burner that the old burner did not have. I removed the light and the wire connecting it to the burner and connected the freed new burner connector based on the old/new burner connection numbering. Despite my lack of confidence that I correctly installed the burner, it worked on the first try and I am very happy to have it fully functional again.
Read less
Todd from STATE COLLEGE, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wright frount dual burner did not work
number to get the correct part was problem. item number was a whirlpool number. all other soureces i could not get the part. part selec t was able to come up the whirlpool item number. when i received the correct part it did not take long repair the problem. thank you for all your help.
Freddie L from HOLT, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Outer Ring of Dual Radiant Burner Does Not Come On
Undid two screws on underside of cook top, lifted and exposed underside. Transferred wires from the faulty burner to the new burner, one at a time, paying close attention to their respective position on the wiring posts/terminals. Undid two screws holding old burner and then mounted the new burner to underside of cook top. Was really simp
... Read morele to do. :)
Read less
Christopher from Fredericksburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
43 of 61 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faulty Element Thermostat
1)Turn off breaker to range 1.1)Disconnect the downdraft vent blower 2)Remove Range from Counter area (delicate procedure) Caution do not stress (Lift with or pull on) the cook-top 3)Remove Ceramic cook-top from base (hidden fasteners-remove the vert trim at front of range - it hides two fasteners) 4)Remove old el
... Read moreements 5)Rebuild the supplied elements (multiple options, copy the old element layout before disassembling- tricky) 6)Swap-out replacement elements (replacement elements were assembled slightly differently in the new style elements so wiring was slightly different) 7)Re-assemble Ceramic cook-top 8)Re-mount to base (needs assistant to support ceramic while reconnecting cable harness connector) 8) Re-set range into counter (Ceramic cook-top is very delicate, so extreme care is required to prevent damage)
Removed stove top. Removed old element paying attention to wiring connections. Installed new element. Redconnected wiring. Put stove top back in place. Tested. Ate dinner.
Michael from Lancaster, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
20 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim Mer
December 5, 2019
The upper oven lower bake element will not heat up. I replaced it with a new one from partselect and it still will not heat up. The broil element heats up. Which part controls the current to the lower bak element?
For model number MER6772BAS
Hi Tim,
Thank you for your question. If the bake element is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If is not is not the sensor, you will need to check the bake element, the electronic control board and the wiring between the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Henry
September 5, 2022
The Dual Radiant Element with Limiter for Our MAYTAG stove (Model:MER6772BCW, Serial: 11867020AC) is not working. Can we confirm the Dual Radiant Element with Limiter with the part #PS11759488 is the one we can use to replace the bad one?
For model number MER6772BCW
Hello Henry, Thank you for contacting us. We have researched the model you have provided and have confirmed the part you are looking for is PartSelect Number PS11759488. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lynette
December 1, 2019
Oven element is broken. And dual right side burners don’t work. What parts and how to change them?
For model number JES9800AAB
Hello Lynette,
Thank you for your question. There are two elements for your oven the bottom baking element under part PS11744404 and the upper broiling element under part PS2081246. As for the surface burner, yours is under part PS11759488 for your model, and when installing these parts, refer to our sites resources on each parts page for installation, there are videos and written guides to help install the parts. Hope this helps!
Trouble with stove element. Model number mer6872baw. The dual element won’t stay on. It comes on for about 8-10 seconds and then goes off. I have tried replacing the element and the switch. All the other burners work. Any ideas?
For model number MER6872BAW
Hi Steve, thank you for your question. If you have replaced both the element and the switch already then the only other thing that we could think of would be that there is a wiring issue inside of your appliance. You may want to check to see if there is any damage to the wiring between the element and the switch. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Laura
January 21, 2019
My Kenmore smoothtop cooktop right front dual burner control no longer works it seems to have disconnected/broken away from the rest of the heating element mechanism. Do i need to replace the entire element to reconnect?
For model number 629-45776
Hello Laura, thank you for your question. Yes, If the limiter on the element has broken away from the element itself, you would have to replace the entire dual burner element. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
January 8, 2019
Right front dual burner stays high when control knob set to lower settings.
For model number JES9800AAB
Hello John, thank you for your question. The most likely issue is the switch PartSelect Number PS2003583 that controls the burner. We would recommend replacing that part and if that doesn't fix the issue you would replace the element itself. You can also test the switch before ordering to be sure it is bad. This link will help you with the testing process.
https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm
I hope this helps!
Was this helpful?
Thank you for voting!
Brian
October 21, 2023
Ordered W-10823709 dual element. terminal labels do not match up to the original part.
For model number JES9800AAQ
Hello Brian, thank you for reaching out. We have attached a relevant video that may help you in connecting the element. We hope this helps!
Was this helpful?
Thank you for voting!
Karen
September 8, 2023
My right front dual radiant burner was not working. I replaced it with correct part and wired correctly back. Still not working. All other burners are fine.
Could it be the burner switch? And what is the correct switch to get for the front dual burner?
For model number MER6872BAS
Hi Karen, thank you for reaching out. If you have already replaced the burner but the issue persists, you may need to replace the infinite burner switch, part number PS11744487. Please contact us anytime if you require further assistance!
The small burner on the dual choice element is not working. Does the whole cooktop need to be replaced?
For model number JED8430ADB
Hello, Thank you for your question. This will either be an issue with the element or the burner switch. You can test both parts with a multi meter and check for continuity. We hope this helps.
Was this helpful?
Thank you for voting!
Michelle
October 19, 2017
I need the outer burner coil -for the right front burner.Only the outer coil is out -the inner burner coil still works. I would like a Jenn air part and part #
For model number JES9800AAS
Hi Michelle, Thank you for the question. The coils are not meant to come apart so the element is sold as one piece. PartSelect Number PS11759488, Manufacturer Part Number W10823709. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"W10823709","title":"W10823709","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
