SENSOR Assembly WB24X25557

Hi Nic, Thank you for your question. If the temperature sensor is not working correctly, it can prevent the bake and broil igniters from operating normally. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to adjust the temperature inside the oven. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, we recommend checking the bake and broil igniters, the electronic control board, and the gas safety valve. We hope this helps!