Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Christian D - August 8, 2024
Verified Purchase
Easy installation
Nice to find the right part the first time.
★★★★★
★★★★★
Barbara G - August 16, 2023
Verified Purchase
return customer
this part was the exact fit for our dishwasher. Again Part Select has met our expectations
★★★★★
★★★★★
William B - February 5, 2022
Verified Purchase
Left Side vs. Right Side issue
I bought 2 pieces for Whirlpool dishwasher. I did not realize there is Left side / Right side pieces, Right being direction different than left side
★★★★★
★★★★★
Jamie S - March 31, 2021
Verified Purchase
I love my dishwasher again!
Such a tiny (missing) part caused the top rack of my dishwasher to not work as designed. This small part fixed it.
★★★★★
★★★★★
Rebekah H - February 2, 2021
Verified Purchase
Easy to install - difficult to find out where to install it
This part was very easy to snap in, but it was very difficult to find a picture or instructions on where this part went. Finally found a video on Youtube that showed a repair of a different part, but had this part already installed on the rack so I could see how/where to position it and snap it in.
★★★★★
★★★★★
Perry S - June 17, 2020
Verified Purchase
Worked as expected. Easy repair.
Clip works great.
★★★★★
★★★★★
Sebastian T - April 6, 2019
Verified Purchase
Clip
Part was fine. Delivery took over a week. Very slow
★★★★★
★★★★★
Ladara B - February 4, 2019
Verified Purchase
Do it yourself repair
Part was exactly what I needed and easy to install
★★★★★
★★★★★
Thomas M - December 17, 2018
Verified Purchase
Easy peasy
Worked great ....exact clip that broke
★★★★★
★★★★★
David D - June 26, 2018
Verified Purchase
Dishwasher upper rack clip
The part was perfect, exactly the same as the original. 30 second installation. This is the third time I have used partselect. Won’t be the last.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 2.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
This did not fix the rack issue
It was wrong part. Visual in diagram does not clearly show what needs to be replaced. Old part just broke so we do not know what needs fixing.
Dorothy from CLARKSVILLE, TN
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
23 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
June 3, 2019
What is the purpose of this clip?
For model number W10919676
Hello Richard, thank you for your question. This is a dispenser guard clip. It prevents the rack from banging into the dispenser on the door.
43 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
April 16, 2018
Have read several explanations about how this part attaches. Still cannot figure it out. Need a picture or better description
For model number KDFE104DSS3
Hi Michael,
Thank you for your question. If you look at your diagram right underneath this part information, you will see how this part is supposed to be oriented before you try to install it. Unfortunately the only way to really explain how this part is installed is by saying: The rounded channels fit onto the bars of the upper rack. You start with the bottom half of the piece and then clip in the top. If you need further instruction you will probably have to contact your manufacturer. I hope that helps. Good luck with your repair.
16 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
February 21, 2019
Does Whirlpool part # w10919676 work on the left and right side of the upper rack. I need a clip for the upper rack right side.
Hello Gary, Thank you for contacting us. Yes, this part is interchangeable for either side of the rack. Have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Marilyn
January 2, 2020
I can send two pictures of where this clip goes if you would like? Your answers just we're not helpful as there are too many bars in a dishwasher.
Hello Marilyn, Thank you for the question. You can send your question along with picture to customer service at customerservice@partselect.com. We hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
March 6, 2019
Do you have a video of install and re install parts on the top rack?
For model number WDT780SAEM1
Hello Keith, Thank you for the question. Here is a link to a video for the upper rack installation and the parts that connect tot he rack. Hope this helps!
https://www.youtube.com/watch?time_continue=91&v=JbzMzGEinb0
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
August 1, 2019
How does the dispenser guard clip fit in top rack? I found it laying is bottom rack.
For model number KDTE104ESS1
Hi Brian, Thank you for your question. If you look at your diagram right underneath this part information, you will see how this part is supposed to be oriented before you try to install it. Unfortunately the only way to really explain how this part is installed is by saying: The rounded channels fit onto the bars of the upper rack. You start with the bottom half of the piece and then clip in the top. If you need further instruction you will probably have to contact your manufacturer. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
January 27, 2020
Hello, what part is needed to prevent the top rack from falling down when it reaches about halfway out? Mine holds about 1/3 of the way and then i have to hold the top rack and pull it out so it doesn't fall.
For model number WDT730PAHB0
Hi Jason. I recommend taking a look to make sure the rail and the rack adjuster is not damaged and on correctly. Thank you for your question and good luck with your repair.
Hi Debra,
Thank you for your question. These clips are referred to as dispenser guard clips. This clips onto the upper dish rack. The rounded channels fit onto the bars of the upper rack. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 19, 2020
Where does this clip go, found in the dishwasher can't figure it out!Thanks
john hand
part #ps11770115
For model number KDTE234GPS0
Hello John, thank you for your question. This is a dispenser guard clip. It prevents the rack from banging into the dispenser on the door. It appears that the hooked part would connect to the bottom of the rack and the slotted piece will connect to the outer bottom wire of the rack. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Harry
October 4, 2021
The upper rack dips down about 2" on the right side below the left side. Left side seems to be working fine. The adjuster housing has a t shaped part with a knob or button on each side that goes into holes in the housing but 1 of the knobs is broken off. Looks like I can fix this by replacing the t shaped piece. Would you agree? Also, how do you determine right side from left side.
For model number KDFE104DWH4
Hello Harry, Thank you for the question. Yes, the T Shape part would need to be replaced. It is called the Upper Rack Adjuster, PartSelect Number PS11756150. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
