Electronic Control Board 5304509983

Hello Bob, Thank you for contacting us. Unfortunately you cannot replace parts of the control board and it can only be purchased as a whole unit. The part number is PS12114578. Hope this helps!

Hi Bryon, Thank you for your question. We are looking for the model number from your range. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. If the electronic control board was the issue it would show signs of wear, damage or burn marks. If it did show any of these signs, then you would need to replace it. Once we have your model number, we will provide you with more information on what other parts you will need to check. We hope this helps. Thank you and have a great day!

Hi Henri, Thank you for your question. If the electronic control board is not working it will need to be replaced. The part number listed under your model number for the electronic control board is PS12114578. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hello Dennis, thank you for reaching out. We recommend checking the Bake Igniter, part number PS2364063, and the Broil Igniter, part number PS11770500, for continuity using a multimeter. If the issue is not with them, the issue might be with the Electronic Control Board, part number PS12114578. We hope this helps!

Hello Byron and thank you for writing. We would be happy to do some research to find you the correct information. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. It could be as simple as a few wires being loose and not connecting properly with the control board, but we can do any research without the model number. We hope this helps. Please contact us anytime if you require further assistance.

Hello Harold, thank you for reaching out. According to our research, the issue is most probably with the door lock motor and switch assembly, part number PS16555576. It locks the oven door during the self-cleaning cycle. You may need to replace it to fix the issue. Glad to be of assistance!

Hello Judith, Thank you for the question. An F90and Loc error code on your range means Maximum oven door unlock time exceeded. You can try to check the wiring between Electronic Control & Lock Motor Micro Switch, Check for binding of the Latch Cam, Lock Motor Rod & Lock Motor Cam. If they check out to be good, you may need to replace the Lock Motor,Part Number: PS1528424. If all situations above do not solve problem, replace Electronic Control. Hope this helps, good luck with this repair!

Hi Liz, thank you for a very interesting question. F11 on the frigidaire gas range means there is a shorted keypad or selector switch on the main control. All you can do is first try to reset the electronics by unplugging the appliance and waiting for 30 seconds. If the problem still persists, you may need to replace the control board, part number PS12114578. We hope this solves your problem!

Hi Chris, thank you for your question. You should not need to calibrate your board. The installation is generally very easy. You just have to remove one wire at a time and then put it in the exact same place on the new board. You may also want to take a photo of the old part wired up as reference. Yes that would certainly damage an electronic control board. I hope that helps. Good luck with your repair.

Hi Perry, sounds like a faulty control board. You might want to unplug the model and check the board connections to make sure if they are secure. Thank you for your question and good luck with your repair!