Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your Whirlpool Range 6" Surface Element, 1200 W
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Wall Oven.
Part# W11171119 replaces these:
8273994, W10248261, WP8273994
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.8
Filter By Rating:
5 Stars
11
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Aston H - August 28, 2018
Verified Purchase
Easy to install
The part came on time and was in good condition. It fit well and was met my expectations.
★★★★★
★★★★★
Gary A - September 6, 2018
Verified Purchase
Right Part - Easy to Install
Ordered this part and received it surprisingly fast! Video direction on sight was accurate and very helpful. Part worked was easy to install.
★★★★★
★★★★★
Thomas P - October 16, 2018
Verified Purchase
Surface Element
All is good so far
★★★★★
★★★★★
Raymond C - February 3, 2018
Verified Purchase
Repair done, burner works.
The part arrived when expected and fixed the problem. The video on the website was helpful, but the burner unit disassembled differently.
★★★★★
★★★★★
JEANNE F - September 3, 2020
Verified Purchase
EASY REPAIR
THE PART WAS IN GOOD CONDITION AND STOVE IS WORKING.
★★★★★
★★★★★
ALLAN G - July 14, 2018
Verified Purchase
Easy repair
Fit perfectly.
★★★★★
★★★★★
MELVIN H - December 26, 2019
Verified Purchase
Easy to replace
Great service and fast delivery.
★★★★★
★★★★★
Owen B - March 1, 2025
Verified Purchase
Easy replacement
Perfect replacement part
★★★★★
★★★★★
Kim Y - June 17, 2021
Verified Purchase
Easy repair
This part solved the problem and we are back in business.
★★★★★
★★★★★
Donald S - October 13, 2018
Verified Purchase
Very easy repair
I really like the videos! My elderly neighbor widow needed a new element. I watched the video, and after that it was a snap to repair. Great job!!!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner didn’t work
I shut off the breaker to the stove. I removed 2 screws from the underside of the cooktop at the front of the unit. I raised the cooktop and had my helper hold the top at an angle to access the burner. I removed 2 screws attached to the burner and then loosened the 2 clips and moved them to release the burner. I transferred the electrical
... Read more connections from the old to the new. Reinstalled the burner and cooktop. Turned the breaker on, tested the new burner and I was fone
Read less
Marc from MIDDLETOWN, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric burner element not working
Video said to remove screws and lift stove top off, remove contacts and ground. My stove top was hinged and required me to lift and pivot stovetop up. The burners were anchored to the stove base not the top. I secured the topso that it would not drop down and proceeded with repair
Ronald from The Villages, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
surface element not working
Ordered new element from PartSelect. It arrived shortly. It did not match the original. Guy at appliance store explained how I could connect the wires on the new one. It still did not fix the problem. A repair man tried for 2.5 hours to fix it with no success. Now I will return the replacement element in the return envelope provided
... Read more.
I watched the video you provide and it answered all my questions. You estimate repair at 10 minutes. My wife said I waz done in under 10 minutes Watch the video, it explained every step and all the little tricks to the snap connections.
Kenneth from AUBURNDALE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner went out
Two screws to remove glass top. 2 connectors to remove. Removed glass top and put it upside down. Remove 4 wires and 2 Phillips screws. Reverse steps.
Ronald from DEFIANCE, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Element
Remove top by opening oven and taking out two screws in the front. Lift up top and unplug wire connectors on bad element, writing down where they are landed. Take out screw on element bracket and replace. That easy. Be sure to unplug appliance for your safety. :-) Also just wanted to add that PartSelect was great. Ordered it on saturda
... Read morey and was cooking with it on tuesday. Great job.
Read less
Dean from Farmington, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
14 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass top stove element stopped working
really easy! Removed 2 screws under the glass top at the front, access from the open oven door, then removed the ground wire, removed the stove top, took the element holder off,( 2 screws)and replaced with new element, 30 minutes. I ordered the part and came within 18 hrs of ordering it, fantastic experience.
Robert from Fruitland Park, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
22 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad element replacement
Took off top and pulled out old element and plugged in the new one
Thomas from Warren, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
9 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface Element Out
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Terry from Rockwall, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
60 of 79 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anne
September 7, 2022
My 6” element goes straight to high and stays there no matter where I set the knob. How can we correct that?
For model number MES8880DS0
Hi Anne, thank you for your question. We have researched your model and found that the issue is probably with the Right Rear Burner Switch, part number PS11769788. If you require assistance to place an order, please contact customer service. We hope that helps!
My glass range top does not come off like I’m the video. Is there something that I’m missing? It will not slide towards me and up. It seems to be attached with a hinge.
For model number GFE461LVQ0
Hello Sara, thank you for your inquiry. According to our research, you need to unscrew the screws at the bottom of the range top which you can access by opening the oven door. After that, you need to unscrew the hinge from the range top. The hinge is located at the back of the range top. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kinting
September 14, 2023
What size is for right front element radiant
How many inches
For model number WFE525SOJZO
Hi Kinting, thank you for getting in touch. We have found that the size of the right front surface element, part number PS11775308, is 10 inches. Glad to be of assistance!
Hi, my cooktop model has 2 small burners in the top and 1 medium in the left bottom side and 1 large in the right bottom side. I lost 1 small left side about a year ago and now a few days ago I lost the second small in the right side. Can you provide me with the model number bc the diagram doesn't specify it for the small burners.
Thank you,
For model number MER6757BAS15
Hello Irene, Thank you for contacting us. The Small Elements are listed as PartSelect #: PS12348164. The Small Elements are the same for each side and are sold individually. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12348164
Manufacturer Part Number: W11171119
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"W11171119","title":"W11171119","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout