We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stanley
November 14, 2018
We have a wall oven that shows no faults . The oven light works and nothing else does checked terminal strip and it looks good .Do you have any suggestions?
For model number FFEW3025PBB
Hello Stanley, thank you for your question. If the unit will not turn on, and nothing but the light works the electronic control board should be replaced. That is part number PS12365663. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stanley
November 15, 2018
Does this controller come with new ribbons?
For model number FFEW3025PBB
Hello Stanley, Thank you for the question. The Ribbon is only sold as part of the front Panel, Part Number: PS12364397. Hope this helps, good luck with this repair!
Oven overheated while baking on top rack to crisp at 370 and f10 came on. We disconnected power to stop code then turned back on to run fan and cool. After letting fan run for over two hours we disconnected power again. When we connected again, oven came to temp, we turned off to let cool, the fan still does not turn off.
For model number Ffew3025pbb
Hello Jennie, Thank you for the question. The F10 indicates that the control detects a runaway temperature in the oven. We suggest testing the Temperature Sensor, PartSelect Number PS11758156. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps.
Oven wasn’t heating. Replaced control board#5304514068. Clock lights up and am able to set it. No other buttons work?
For model number FFEW3025PSB
Hello Christine, thank you for reaching out. We recommend checking the Control Panel, part number PS8691960. We hope this helps, good luck with this repair!