The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Lower Spray Arm
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Not draining
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Timothy R - May 4, 2024
Verified Purchase
Easy to replace, and worked as expected
Shipped fast!
★★★★★
★★★★★
David V - April 27, 2024
Verified Purchase
Dishwasher repair
Works well
★★★★★
★★★★★
Billy R - April 11, 2024
Verified Purchase
replacement wand
Part was perfect. Exactly as I ordered.
★★★★★
★★★★★
Jerry R - March 27, 2024
Verified Purchase
Works well but needs installation instructions
My dishwasher is back in order after I realized it had to be snapped in place and secured
★★★★★
★★★★★
Julie C - March 8, 2024
Verified Purchase
Easy ordering
Fast delivery, Part was as expected… easy install
★★★★★
★★★★★
Rebecca R - February 15, 2024
Verified Purchase
Easy instal
Part arrived quickly and is working great!
★★★★★
★★★★★
Xiaohong F - December 28, 2023
Verified Purchase
Easy Fix
The part was right and fast came. It fits in my dishwasher and it works again now.
★★★★★
★★★★★
Amy D - December 22, 2023
Verified Purchase
As expected
Quick shipping
★★★★★
★★★★★
Kennethia H - December 8, 2023
Verified Purchase
Repair
It did NOT fit and would like to return
★★★★★
★★★★★
Catherine C - November 8, 2023
Verified Purchase
Simple repair. Works perfectly.
The part was delivered on a timely manner and works great.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 53 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lower spray arm and arm support became loose fell on the hot coil and melted.
First let me say I love this company, I have used them before and I will use them again. Parts arrived quickly, unwrapped them, put the video supplied by this site on my phone and the entire project was done in less than ten minutes. My dishwasher works like new. Thank you !
Lower spray arm support vibrated out, melted lower spray arm.
Grab the tab on the support and rotate 1/4 turn counter-clockwise to unlock it, then lift it off. The lower spray arm simply pops off the support by spreading two tabs underneath.
Align the opening in the lower spray arm support with the outlet post in the bottom and rotate 1/4 turn clockwise to lock.
*Note: directio
... Read moren to remove the filter basket differed from the manual. Visually line up the notches and do not twist too far when locking or you WILL break the retainer tabs.
Simply center the lower spray arm over the support and press down until it locks into place.
The original lower spray arm had one end break loose the metal retainer end. I used a temporary small hose clamp to fix as I waited for the new lower arm to arrive.
The design is very easy.... pull up on the OLD and then just push DOWN on the new arm into the bottom.
Philip from FREEHOLD, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm did not fit
It appeared that the part ordered was either incorrect or the part was incorrectly picked. I have returned the part and hope the next try will be more successful.
Old spray arm melted and clogged, had popped off once and laid against heat coil.
Popped off the old spray arm ... INTENTIONALLY, and put new one in. Had to lift off small strainer to allow old arm to release! Be sure to turn arm until it clicks into place, return small strainer/clip, and you are in business! Most trouble I had was getting this old bo y up off the floor afterward. Dished so much cleane
... Read morer now!
Read less
Jerry from TUCSON, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower swivel arm broken
Unsnap old and snap on new
John from DOTHAN, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old sprayer arm melted to heating coil.
Easiest repair EVER!!! You just pull the old spray arm off (be sure to keep all the smaller pieces that click it into the bottom of dishwasher) and pop the new one in. Done!
Rhiannon from FEDERAL WAY, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm came off and melted mon heating element
Takes longer to open the machine and remove the lower basket than to do repair.
Snap arm and support together, align and twist in machine to lock in place.
Save yourself some time and buy the support. High risk it can be broken while being removed from the arm. I am glad I purchased a new one and didn't take the
... Read more risk.
Became loose, and spray arm burned alittle. Stopped working and water started over flowing.
Unscrewed the old arm, and watched a utube video to place back in properly.
Kimberly from WILMINGTON, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lower dishwasher arm was a replacement for the previous one.
I removed the bottom drawer and glass trap in order to remove the old melted down washer arm. Once those parts were removed I was able to easily secure the new replacement be ensuring that it was turned enough and fit down securely (side note, if you don't hear the arm click or snap into place, it isn't secure). The part works just fine,
... Read morebut sadly I think I have another problem with my washer, but I will figure it out.
Read less
LaSonya from GREENVILLE, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
54 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
November 26, 2019
I'm looking for a new lower spray arm. I see these numbers on the piece : 1545677 tw asm, 1545678 tw bot, 1545680 pw asm and 1545681 pw bot.Can you help me ?
For model number FFBD2408NS0A
Hello Samuel, thank you for your question. The lower spray arm for this unit is PartSelect Number PS12585623. Please enter the part number into the site for current price and availability. Good luck with your repair!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Brandon
May 27, 2019
Does this lower spray arm fit my dishwasher?
For model number FFBD2406NS0A
Hello Brandon, thank you for inquiring. Yes, this is the replacement for your model.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Sharon
September 17, 2021
Cleaned the filter under the spray arm and cannot get the spray arm to screw in tightly again. Right now it wobbles
For model number Fphd2481kf1
Hello Sharon, thank you for writing. We have a video for you to look at to see if there is something maybe you missed in reattaching the arm. We hope this helps.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
May 29, 2019
What part # is the lower spray arm for this model dishwasher? Thx. Bill
For model number FGBD2434PW5A
Hello Bill, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12585623. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Toby
August 29, 2019
The dishwasher isn't cleaning. It pumps, drains and fills with water, but the spray arms aren't spinning. Any ideas?
For model number CDB500NW3A
Hi Toby, if it is affect all the spray arms there is mostly likely an issue with the pump motor part 154844301. Thank you for your question and good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Valery
August 5, 2019
Will this spray arm be compatible with my dishwasher model # ffbd2407ls1c?
For model number FFBD2407LS1C
Hello Valerie, thank you for your question. Unfortunately, that is not the lower spray arm for your unit. The spray arm for your unit is PartSelect Number: PS1524955. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Betsy
March 6, 2020
Is there an installation instruction online
For model number PS12585623
Good Day Betsy. Thank you for your question in regards to the Dishwasher Lower Spray Arm (PartSelect Number PS12585623). Based on our research, here are the steps to replace the part: 1) Ensure your unit is unplugged or the circuit breakers are off before beginning any repair. 2) Turn off the dishwashers water supply underneath the sink. 3) Open up the dishwasher door. 4) Pull the lower rack out and set it aside. 5) Reach in to remove the lower wash arm (On each side on the bottom of the Spray Arm, there are small locking tabs that can be pushed aside using a flathead screw driver to release it from the unit). 6) Once locking tabs have been released, you can pull it off the dishwasher. 7) Put the new lower wash arm in (simply set it down onto its support and push it down to lock it in place). 8) Ensure it is spinning freely and does not hit the heating element. 9) Put the lower dish rack back in. 10) Close the dishwasher door and you are done. We hope this helps! Best Regards.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Carl
September 23, 2019
I need a lower sprayer arm for that model I just do not know what sprayer arm is for that model.
For model number FFBD2407LS0B
Hi Carl,
Thank you for your question. The part number listed under your model number for the lower spray arm is PS1524955. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
K
November 21, 2019
Hello, is this the right part for the ffbd2406nw6a model? Thanks.
For model number FFBD2406NW6A
Hi K, this is the correct part for your model. Thank you for your question and good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Abby
August 16, 2021
Does the bottom arm have to be replaced if it's wobbly and keeps hitting the bottom rack? I took the rack out and it cleans fine so i know it's the bottom arm. I do not see a model number on the part and i'm not sure what number to put otherwise from the stickers inside.
For model number I'm not sure how to find it.
Hi Abby,
Thank you for your question. If the lower spray arm is loose and you are unable to tighten it, then it should be replaced. If you could resubmit your question, with the model number from your dishwasher, we would be happy to help you with this. Here is a link from our website that you may reference on where to locate the model number on your dishwasher, https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. If you have any questions, please let us know.
