CNTRL-ELEC W11305293

Hi Mark, thank you for reaching out. We have researched your model and found that the issue is probably with the Console, part number PS12348002. If that does not take care of the issue, then the problem is most likely to be related to the Control Board, part number PS12704676. If you require assistance placing an order, please contact customer service. We hope that helps!

Hello Alice, Thank you for your question. A dishwasher's lights flashing or blinking could indicate a problem with the door latch assembly. Check for any visible damage or loose connections. We hope this helps.

Hello Steven, thank you for contacting us. If a dishwasher turns itself on, it could be due to a faulty control board, or a stuck or malfunctioning start/resume button. We would recommend making sure that the control panel is clean, and no button is stuck on it. If the problem persists, then you may need to check the control board, part number PS12704672, to solve this problem. We hope this helps!

Good Day Johnny. Thank you for your question in regards to your unit (Model Number WDT970SAHZ0). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. They can be reached at by phone by calling 800-807-6777. Best Regards.

Hi Patsey, Thank you for your question. The part number listed under your model number for the control panel is PS16217709. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hello Charles, Thank you for the question. This could be an indication the Dishwasher Electric Control Board is not proceeding through the cycles properly and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Hector, Thank you for the question. A blinking Start light indicates an interruption in the cycle or start-up. We suggest unplugging the appliance from the power source for 5 mins to see if this resets the appliance. If not we suggest to make sure the Door Latch is closing properly. We hope this helps!

Hello Bryan, Thank you for the question. The 6-1 Error code indicates it Won't fill and the 6-4 indicates The float switch is open. We suggest checking the overfill float switch to see if it's stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off. If everything looks good, you may need to replace the Float Switch, PartSelect Number: PS11750031. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Danny, thank you for your inquiry. Our research has found that a faulty door latch could be the cause of your issue. Part number PS11756967 should fix this problem. We have attached a video to assist with your repair. We hope this helps.

Hello Justin, thank you for the question. We would recommend checking the control board, part number PS12583931, to fix the issue. We hope this solves your problem!