Refrigerator Dispenser Door Solenoid Assembly WR62X10055

Hi Robert, Thank you for the question. Yes the solenoid is what controls the flapper and opens and closes it when dispensing ice. Unless you can see physical damage or wear to the spring it can be reused with the new flapper and solenoid. Hope this helps!

Hi Latorius, Thank you for the great question.Try to pull your ice bin out and check the opening where the gold or brass colored rod enter. There is a solenoid part number PS1483583 inside that should actuate and move the bucket arm in order to dispense cubes. Stick your finger in there and to get it to drop down. The solenoid may be damaged, or just frozen in place. Once it drops down leave the freezer door open, actuate the door switch with your finger, while pressing the ice lever in the dispenser. Make sure you have selected cube. If the solenoid is working will go up then back down when you release the lever. If not, then you will need to remove the housing and see if it is full of frost. The solenoid shaft must move freely in order to work properly. They can also rust with time and prevent the free movement. Hope this helps!

Hi Robert, Thank you for your inquiry. It actually could be either of those parts. What I would suggest is that you test them with a multi-meter and see if either of them are malfunctioning. Usually it is more likely that the dispenser solenoid is the problem, however you can test them to make sure. I hope this helps!

Hi Art, Thank you for your question. It could be your solenoid. I would suggest also just taking a quick look at the spring and the housing that holds your door. Sometimes it is just a simple break in a piece there that will keep that door from closing properly. If you do not see any physical damage, you can test your solenoid to see if it is broken or not with a multi meter. The price of the part is up above in the part information. Good luck with your repair.

Hello Warren, thank you for your question. Yes, if the water valve is dispensing water without pressing the switch, and you have already changed the micro switch, I would recommend replacing the water valve. If the water valve is stuck open the water will continue to dispense. I hope this helps!

Hello Johnny, thank you for contacting us. It is possible that it could be the dispenser solenoid. You also may want to check the inlet water valve as well. Hope this helps!

Hi Chris, Thank you for your question. If the solenoid assembly is freezing or rusting, make sure that the dispenser door is closing and sealing properly. Also, check to see if there is frost build-up, by removing the ice bin. If the solenoid is rusting, there may be some spillage or splash from the water dispenser. Try using a thin coat of vegetable oil on the dispenser door to help prevent the door from rusting. I hope this helps. Thank you and have a great day!

Hi Russell, Thank you for your inquiry. That could just be the water that is still in the line. I would suggest testing your water inlet valve to see if it is working correctly. Otherwise you might have to look at your water line and see if there is a leak somewhere. Good luck with your repair.

Hello Glenda, Thank you for your inquiry. I would test your water inlet valve and ice maker for continuity to see if too much water is going to the ice maker. Too much ice buildup can also clog the dispenser flap and make it so that only the crushed ice is getting through and not the bigger cubes. Try taking the bucket out and checking for any obstructions and clearing any trapped ice away. You can test the valve with a multimeter. There are also tests online for your ice maker as well. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

Hi Carmen, Thank you for your question. If the chute is not closing after the water or ice is dispensed, the issue may be with the actuator or the micro switch. The actuator is a possible option when ice door won't open or shut properly or when water or is not dispensing. The switch helps control the functions of the dispenser and you may want to test the micro switch with a multimeter to check for electrical continuity, and replace it if it shows no continuity. Also examine the water tank and and the water line connectors for any signs of wear and tear. I hope this helps. Thank you and have a great day!