Fresh Food Door Gasket - White 8201809

Hi Micheal, this gasket is the inner door seal, and it can be installed on the right side or left side. This gasket is sold individually. I hope this helps, good luck with your repair!

Hello Michael, thank you for your question. This gasket is installed into a groove that goes around the frame of your door. To remove the part you just pull it out of the groove and to install the part you push it back into the groove. Good luck with your repair.

Hi Robert, Thank you for your inquiry. This gasket is installed into a groove that goes around the frame of your door. To remove the part you just pull it out of the groove and to install the part you push it back into the groove. Good luck with your repair.

Hello Maryse, Thank you for your inquiry. Whirlpool owns KitchenAid and makes the parts. The part number for the freezer gasket is 2309216 and the part number for the fridge gasket is 8201809. Hope this helps!

Hello Jonathan, Thank you for your inquiry. There is a groove that goes around the frame of the door, and you would just need to insert the gasket into the groove. It is usually helpful to warm the gasket up first by immersing it in hot water or throwing it into a clothes dryer for a minute to make it more flexible. Hope this helps!

Hello Kate, thank you for inquiring. This Fresh Food Door Gasket is the correct replacement for your model, but you would need to purchase one for each side as they are sold individually.

Hello Richard, thank you for getting in touch. The door gasket you mentioned comes with the screws, but the screws are not for holding the gasket in place. These are for the refrigerator door. In order to hold the gasket with the door, there is a groove present you just need to place the gasket around the door liner and press it underneath the door liner. Glad to be of help!

Hello Steve, thank you for reaching out. The gasket, part number PS1518643, is compatible with both left and right side refrigerator's fresh food doors. This gasket is installed into a groove that goes around the frame of your door. To remove the part you just pull it out of the groove and to install the part you push it back into the groove. We hope this helps.

Hi Mary, Thank you for the question. The PS1518643 is the correct gasket in white for the model number provided. We do not have a video for this gasket as of yet, but the old gasket should just pull off and the new gasket just pushes into the channel around the outer edge of the door. Some previous customers have used a spoon to push the gasket into the channel. Hope this helps!

Hi Simon, Thank you for your question. Part number 8201809 is Whirlpool's part number for the gasket and part number PS1518643 is the part number we have listed for the gasket on our website. Both part numbers are for the same door gasket. Where this part is listed under your model number, it is guaranteed to be the correct part. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.