Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This water inlet valve (Refrigerator Water Inlet Valve Assembly) supplies water to the ice maker and the water dispenser in your refrigerator. It is located at the back of the fridge, beneath the bottom panel. It is connected directly to 2 water supplies, a wiring harness, and your inlet water tube. This part is located at the back of the fridge, beneath the bottom panel. It is connected directly to 2 water supplies, a wiring harness, and your inlet water tube. Minerals and sediments can build up over time and cause a blockage in your inlet valve. They can also cause the valve to stick open, leading to an overflow of water. If this part is malfunctioning, water flow to your appliance could be compromised. Check for small ice cubes or a lack of ice cubes/water, as this is an obvious sign the part is damaged. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. Test your water inlet valve with a multimeter. You can test both the water dispenser side and the ice maker side. The part measures approximately 3 inches long and 2.75 inches wide and is constructed of plastic and metal. This replacement part features 1 dual inlet water valve with quick connections. It also has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your General Electric Refrigerator WATER VALVE WITH GUARD
Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water | Ice maker not making ice | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
Part# WR57X33326 replaces these:
AP6995571, WR57X10032, WR57X10040, WR57X10064
Customer Reviews
Average Rating:
★★★★★
★★★★★
86 Reviews
4.6
Filter By Rating:
5 Stars
70
4 Stars
8
3 Stars
3
2 Stars
2
1 Star
3
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David M - September 26, 2022
Verified Purchase
Repair completed
Water valve cured the slow water drip from the dispenser.
Very easy fix. Thanks
★★★★★
★★★★★
John W - October 2, 2022
Verified Purchase
Part fit perfectly
Came with everything and went on easy
★★★★★
★★★★★
Edward E - August 25, 2023
Verified Purchase
Water Valve Replacement
The needed part was expeditiously mailed to me and I was able to fix my problem which was the water dispenser didn't dispense water nor did the icemaker make ice. The item was easy to replace and everything works like new once again!
★★★★★
★★★★★
Kevin B - October 13, 2022
Verified Purchase
Finding out how to repair a there and fix my refrigerator
website was easy to manage entered my model number and all parts including owner manuals came up
★★★★★
★★★★★
CHARLES W G - September 26, 2023
Verified Purchase
water valve
The part ordered worked and installation was straight forward . The price was a little high but showed up on time . so far so good no leaks we shall see how long it lasts.
★★★★★
★★★★★
Bob H - March 27, 2024
Verified Purchase
Easy fix, quick shipping, very satisfied
Easy fix
★★★★★
★★★★★
Kris H - January 22, 2024
Verified Purchase
Worked great
Easy to install
★★★★★
★★★★★
Stephen R - May 20, 2022
Verified Purchase
Easy Repair
The part was in great condition and easy to install
★★★★★
★★★★★
Henry G - October 12, 2023
Verified Purchase
Easy fix
Part was just what I needed. It fixed my ice making problem. The tube that water came out of into my ice maker would freeze up and not make ice. The valve was not shutting off and it would let water dribble out of the yube and eventually freeze shut. I replaced this valve and it fixed my problem. It was the part I needed and it arrived in a timely manner.
★★★★★
★★★★★
Jacqueline K - May 22, 2022
Verified Purchase
Simple repair
Using the Parts Select Instructions on video, this was a simple fix!! Thank you.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 112 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker was over filling and freezing the cubes together.
I turned water off at valve and unplugged refrigerator. I removed screws to remove cardboard cover at bottom. I removed screw holding duel inlet water valve bracket and pulled out valve. Then it's just a matter of exchanging electrical connections and water lines. The electrical connections unplug and plug in-red to red and blue to blue.
... Read moreThe water lines are two different sizes so they can't be mixed up. Then reattach bracket and cardboard cover. Turn water back on and plug back in.
Read less
Gary from Pickens, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was dripping in freezer (ice maker)
We actually followed the instructions of the video for the installation of the dual inlet valve and it was incredibly easy to perform. The fridge works perfect again!
Gerda from RIO RANCHO, NM
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench (Adjustable)
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water out of refrigerator but had ice
Followed the video showing how it was done. Took me longer to go to the basement and shut the water off and on, than it did to replace the valve
G Michael from MONROE, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual Inlet Water Valve
Just fallow video shows that it 123 !
lam from JACKSONVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser is not working........water not coming out!
Show installation!
George from HAYWARD, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker working but water dispenser not working
The very first symptom here is important! The door water dispenser is not working but the ice macine is working. You may only have a frozen water tube in the door so do the following before diagnosing that your solenoid valve is bad: 1) the tube usually runs under the front of the refrigerator and usually has a quick disconnect. Undo the
... Read moreconnection and press the dispenser. If water comes out of the tube you have a frozen or blocked tube in the door. 2) Immediately adjust the temperature in the freezer and warm the freezer compartment as much as you can without destroying the freezer contents. Wait 24 hours. This will usually unfreeze the line. Do not waste your time with a hair dryer. NOW, if this doesn't work and you are convinced you need to order and replace the solenoid, follow these steps. Assemble your tools first. I needed a good ratchet set and a screwdriver. A shop towel is helpful for spilled water. A light is handy. Pull out the refrigerator to gain access to the rear of the unit. Unplug the power and close the water valve (older homes, you may need to actually shut the house water supply). Remove the screws which hold the cover over the lower half of the refrigerator. On the left you will see the solenoid. It's always good to see that your new part matches the one you feel needs replaced. They may not match perfectly due to changing design but they should be very similar. One screw holds this part in place and access is very simple. Now simply unplug the electrical connections. In my case, one blue "blade" type connection (powering the water) and one red "blade" type connection powering the ice maker. They are not the same size and this coupled with the coloring means you will not accidently switch them. pull the tubes clear of the solenoid. This is simple and needs no explanation. Grab your new solenoid and reattach both the electrical and water lines (two, remember, ice maker and drink dispencer). Replace the single screw. Re-attach the rear, lower refrigerator cover and go to the front of the unit to check the water. You can listen carefully and hear the power engage from the new part bringing you water. Clean up, replace the refrigerator back to its place and look really tired when your wife sees that you worked "so hard"! You probably saved at least $50-$80 from a service call.
Read less
David from WATERLOO, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser freezing at the dispenser nozzle. Ice was being made.
I replaced the solenoid assembly on the dispensing door and the dual inlet water valve. I found that the solenoid assembly was rusted and caused the door not to allow the ice to dispense properly. Also the water line was checked per the instructional video offered by this site I found trash in the line. I previously had issues with t
... Read morehe water freezing in the in-door water dispenser which resulted in a heater repair kit being installed by a service tech it did not last. Everything worked great for a week and the water stopped dispensing from the door. The final fix was found on line as follows - Install a 8 inch length of weed-eater line (.95) into the dispensing tube. Let it extend out about 1" or less. When the water stops flowing just give the line an up and down pull and the small amount of ice in the line is removed thus allowing the water to dispense properly. The trouble shooting and helpful videos provided by this site are great. I received the parts quickly and they followed up with me after the job was completed. I have moved onto the washing machine and ordered parts for another home project. Thanks Randall
Ice maker inlet tube was freezing up, and eventually the icemaker overfilled and completely froze up
After lots of research online, i narrowed my problem down to be the double outlet water valve, behind the fridge. My biggest problem was getting the refridgerator out of its spot, but after that it was pretty simple to change. I took the cover off the bottom, in the back of the fridge, then i removed the inlet waterline (after i turned
... Read more off the water supply to the fridge). After that i removed the screw that holds the valve to the framework. Now i pulled off the two other waterlines from the old valve and moved them, one at a time, over to the new valve, along with the wire harness. The rest of the instalation was reverse order. Simple fix that im glad i didn't pay an expert to do!
Read less
Jake from Brainerd, MN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was very helpful to have a video giving you instructions
Of course being a women to say I repair my refrigirator is very self gratifying specially when share with other womens like me divorce,having to do on their own, great site, very simple explain on the video with words I could understand, no surprices right to the penny. I save a lot of money, thank you so much, i recomend the site to anyb
... Read moreody.
Read less
Katherine from Converse, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My refrigerator/freezer had several problems; both frig and freezer wasn't cooler properly, some days everything froze. The ice maker stopped making ice and water was leaking in the freezer.
I first called a GE repairperson. The diagnose the problem and told me the main control board was shot and the double outlet water valve needed replaced. The estimate for both parts and repairs was $850.00. I thought the estimate was high so I did some research on-line and discovered I could purchase the parts myself. When I researche
... Read mored the part, a short video popped up explaining how to install the part. I watched both video's and did exactly what the guy in the video said and was able to repair my refrigerator/freezer myself. The total cost for both parts was $200.00, I save $650!!! Amazing. I ordered the part on Saturday, and was told it would take a week to 10 days to receive the part and the part showed up on my door steep the following Tuesday. I'll never call a repairmen first again. I'll research the issue through partselect.com and try to fix the problem myself. I am not technologically or mechanically sauvy and have spent thousands on repair bills in the past, no more will I do that.
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
April 25, 2022
The fridge doesn't dispense water or ice. I assume it is the water valve. How can I confirm that it is the valve
For model number Gss25wgtaww
Hello Ken, Thank you for your inquiry. You can test the valve with a multimeter. We have included a link to our video on ice maker issues, which also shows how to test the water inlet valve with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
January 25, 2022
Water not depending and ice maker working. I have replaced the water pump, water filter and dispenser solenoid. All I get when I go get a glass of water. There is a clicking sound. Any clue what I should try next?
For model number GSL22JFXALP
Hello Tim, Thank you for the question. If the water is not dispensing but the ice maker is working, this could indicate the Micro Switch is faulty. The Switch can be tested with a Multimeter to check the continuity. We hope this helps!
We are able to make ice but unable to get water - what is the likely cause and what would be the likely solution?
For model number GSH22JSDD SS
Hello Robert, Thank you for your question. Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed water inlet valve. Check to make sure the water lines are not frozen, if they are you can use a hair dryer to thaw them out or unplug the refrigerator and allow it to defrost. Check the refrigerator’s filter. When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one. Part number PS8746144. If the lines are not frozen and the filter is new it could be your water inlet valve, part number: PS16226572. We hope this helps!
the water dispenser continues to drip even though water is not being dispensed. What could be the issue?
For model number pss26mgtbcc
Hi Raymond,
Thank you for your question. If there is air trapped in the water lines, the dispenser will drip. You will need to purge the air from lines. Take a pitcher or a bucket and press and hold the water dispenser for a few minutes. This should clear the air from the lines. Sometimes when you replace a water filter, air will become trapped in the lines. It is recommended to flush the water filter before using it. Make sure also that the water lines are connected correctly to prevent air from entering the lines. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joanne
June 20, 2022
Does this part fit the model of fridge that I have?
For model number GSHF3KGZBCWW
Hello Joanne, thank you for your question. Yes, the number PS16226572 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
May 16, 2023
The water dispenser will not shut off. Ice dispenser seems to be ok and working. Had to shut off water valve to refrigerator.
For model number GSS 25Q GT B WW
Hi Rick, thank you for the question. One of the most common causes of this water dispensing problem is a stuck water dispenser button. If it is pressed too hard, it can get stuck in the on position. To release it, try pressing it again. If this does not work, you can try unplugging your fridge for 5 to 10 minutes. This can also help release a stuck button. If the issue persists, you will need to check the continuity of the water inlet valve, number PS16226572, with a multimeter and replace it if defective. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
May 29, 2023
Is this part all I need to fix a major water leak coming from the ice maker? At the same time the leak started the freezer light began flickering. Do I need an additional part?
For model number GSF25TGTA
Hello Linda, thank you for contacting us. The leaking might be caused by a faulty water inlet valve, part number PS16226572, or a clogged water filter, part number PS8746144. Over time, the water filter in the ice maker may become clogged with minerals, sediments, and other debris, which causes the water to back up and leak from the ice maker. The light flickering may occur if the leaking water reaches the wirings in the refrigerator. We would suggest draining and thoroughly drying the refrigerator with a towel. We hope this helps!
water just stared to coming out of dispenser last month oct. 2022 was unable to stop it had to shut water valve off behind frig
For model number gsh25jgbww
Hi Michael, thank you for the question. We would recommend checking the following parts to fix your issue: Water Inlet Valve, part number PS16226572, Water Filter, part number PS8746144, Dispenser Door Assembly, part number PS964304, and Tube Assembly, part number PS292253. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
I'm getting about a cup of water in the bottom of the freezer each day. I turned off the ice maker but I still get the water in the bottom of the freezer. I turn off the water to the refrigerator and no more water on the freezer bottom. Is the water valve not closing completely?
For model number Model GNs23gmhbfes
Hello Tony, thank you for asking. Based on the description you have provided, we would recommend replacing the water inlet valve, part number PS16226572, to fix the issue. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
September 5, 2023
Water to my ice maker will not shutoff. It was working and I put in a RO system and never had the time to hook up the RO system to the refrigerator. I finally hooked it up and now the ice maker water just keeps on running and will not shutoff. I figure it is either the ice maker or water valve. Any troubleshooting tips to help me figure out which part(s) might be bad.
For model number GSL22JFTD
Hi David, thank you for reaching out to PartSelect. If there are food items stuck in or jammed around the ice maker, it may not cycle properly. The ice maker may get stuck in the middle of a cycle or overflow with ice or water. Inspect the icemaker and remove any items that may interfere with its operation. The water inlet valve supplies water to the refrigerator ice and water dispenser. The valve requires a minimum of 20 psi to work properly. If the water pressure is too low, the valve may not close fully when the power is shut off. As a result, the valve leaks water into the ice maker, causing it to overflow. Check the water flow and test the pressure to determine if it is at least 20 psi. If this is not the issue, we recommend checking the water inlet valve, part number PS16226572. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
