Lower Bagger Chute 731-09173A

Hello Les, thank you for getting in touch. Based on research, the size of the hose is 38 x 8.5 x 8.5 inches. Thread the upper end of the chute tube securely into the upper chute support. There are two tabs on the lower inside part of the upper chute support to allow for secure threading. The chute tube and upper chute support are left-hand threaded. Thread anticlockwise until secure. Lift it by the handles at the bottom of the chute tube. Slide the chute tube over the chute elbow mounted on the cutting deck. Make sure the connection is secure and there are no gaps between the chute tube and the chute elbow. If open, close the grass catcher cover before mowing. We hope this solves your problem!

Hi Charles, thank you for contacting us. The lower bagger chute you have mentioned is not compatible with your model. Your model comes with chute assembly, part number PS16388457. We hope this helps!

Hi Les, thank you for reaching out. According to our research, you will need two bolts, two nuts, and a metal bracket to mount it to the deck. We hope this helps!