High Limit Thermostat and Thermistor Kit Specifications
This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce enough heat, or takes too long to dry, then the thermistor might be defective or damaged. This can cause a fault code and could begin either prolonging or shortening drying time. As a safety precaution, make sure to unplug the dryer from the power source before beginning this installation, and wear gloves to protect your hands. Refer to the installation instructions provided by the manufacturer for further guidance.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your LG Dryer High Limit Thermostat and Thermistor Kit
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jason N - 8 days ago
Verified Purchase
Everything went well
The videos help considerably, I am back in perfect order. Not sure which part was causing the issue, so it was nice to get them all at a good price.
★★★★★
★★★★★
Chad C - March 15, 2020
Verified Purchase
Good part worked perfectly
Part solved the problem with heating
★★★★★
★★★★★
Paul S - March 2, 2020
Verified Purchase
Easy repair, fixed the overheating issue.
The part arrived in 3 days and the repair was super easy. The 4+ year old thermostat was not tripping causing the high temp thermostat to constantly trip. I ended up replacing both thermostats, the moisture sensor bars, and the thermistor since I had the dryer taken apart and one of these was bound to go next.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
igniter would not light
Initially replaced igniter. Didn't think it was bad though. Read other suggestions on another website. None were the correct diagnosis for my situation. And when I figured it out they did not offer correct part. The dryer thermistor temp sensor (probe sensor) is what I replaced. Found it on Parts Select. I did replace other parts also. Bu
... Read moret that's the one that ultimately was the issue. Was not hard at all if one is even a little handy.
Read less
Dave from SAINT JOHN, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Did not heat
Called Parts Select and assisted me in proper parts needed. Drier works as new.
Took out drum. Found all parts easy to locate. Found defective part and replaced with new one.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cody
March 19, 2023
How do you test the thermostat
For model number 61423
Hello Cody, thank you for your question. To test the thermostat, you need an ohmmeter. Hold the two probes of the meter, one probe at one terminal of the thermostat and the other probe at the other end of the terminal. If the meter shows infinite or zero resistance it means that the thermostat is bad. We hope this information is useful!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Catherine
March 29, 2023
Hello is part AGM30045804 the heating mechanism part for this dryer. Problem is the clothes are not drying the heat is gone. Just making sure this is the right part?
For model number DLG7188RM
Hi Catherine, thank you for the question. The part number you provided is the dryer thermistor temperature sensor, which helps monitor and regulate the temperature inside a dryer. If the dryer is not producing heat, then this part may be defective, and you may need to replace it. However, if it is not faulty, then you may also need to check the blower thermostat, part number PS8747887, the moisture sensor, part number PS3529161, and the gas igniter, part number PS3527801. If any of these parts are faulty, you may need to replace them. We hope this helps!
I've replaced the high limit thermostat twice and was told to try installing a thermistor kit. I ordered the kit #AGM30045804 and had no trouble changing the sensor with the wire harness included. I can't find any videos on how to change the two thermostats, or thermistors (the other parts in the kit) anywhere for the model dryer I have. I found a parts diagram, and the corresponding #s for the kit, but i'm not sure where they go on my dryer. I'm assuming they don't connect to the heating element. Any help offered would be greatly appreciated!!!
Sincerely,
Missy
For model number 79681022900
Hi Missy, thank you for your question! Other two thermostats are the blower thermostats, blower thermostat is located on the blower housing of your dryer. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
PAUL
May 11, 2023
Does part number PS16878105 fit my dryer?
For model number DLEX3250V
Hi Paul,
Thank you for your question. This would not be the correct part for your dryer. Your dryer has a thermal fuse, part number PS3530485, a high limit thermostat, part number PS3530482, and a blower thermostat, part number PS8747887. We hope this helps!
ERROE CODE d9
I have cleaned the vent fully
dryer stops 5 minutes into cycle
For model number DLEX3250V
Hello Paul, thank you for contacting us. Based on the description that you have provided, we believe you have a faulty blower wheel. Check the blower wheel. If it is not working correctly, you may need to replace it, part number PS3528491. We hope this helps.
Hi Barbara, thank you for the question. Based on our understanding of the issue, we would recommend checking the thermostat assembly, part number PS3530482, as it is most likely faulty and may need to be replaced. Please submit a new question if you have any follow-ups!
Gas dryer was working, put in load of towels on high heat and smelled burning. Then it would not heat on any setting. Ideas on the part we need?
For model number DLG1502W
Hello Nicole, thank you for contacting us. Based on our understanding of the issue, we would recommend checking the high limit thermostat, part number PS16878105, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Carley
May 3, 2024
Does this part fit my dryer? (DLE2301W)
For model number DLE2301W
Hello Carley, thank you for reaching out. Yes, the high limit thermostat you mentioned is compatible with your model. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Almozor
June 20, 2024
My Dryer is displaying 9A5 message and not heating. Does this kit resolves that?
For model number DLGX7801WE
Hi Almozor, thank you for the question. The kit you have mentioned will not resolve this error code. The error code 9A5 means that your dryer is not detecting the gas getting to it. Make sure that the gas supply is turning on to the dryer from your house. If it is fine, the issue could be with the gas valve assembly, part number PS16878121. It controls the gas supply for the burner assembly. You may need to replace it to fix the issue. We hope this solves your problem!
