Dryer Heater Element 134792700

Hi Jeff, great question. If your dryer is displaying error code E64 that indicates there is a problem somewhere in the heating element circuit. Start by unplugging your appliance, and then checking the wiring between the heating element and the control board. If any connections are loose make sure you secure them, and if the wire harness is damaged that will need to be replaced. You will then want to inspect the heating element for damage, if there is no visible damage it can also be tested for continuity with a multi-meter. When testing if it is electrically open it will need to be replaced. I hope this helps, if you have any further questions please let us know!

Hi Brad, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

Hello David, thank you for your question. The error code E64 means Heater Open Circuit. This error appears when the Heating element or wiring to the heating element is defective. To clear the error code press and hold the far left key under the display and “cancel” buttons simultaneously for 3 seconds. If the error appears again then you’ll need to check heater coils and connections for open circuits. I hope this helps!

Hi Andres, Thank you for your question. If your element is showing anywhere between 0 and 50 ohms of resistance when you test it. That would mean that it is working. If you see anything else, then your part will have to be replaced. Good luck with your repair.

Hi Alan, thank you for your question. The heating element should be reading between 0 - 50 ohms. So by your 51 ohms reading, it is likely your element is the issue. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. Good luck with your repair.

Hi Mario, Thank you for your question. That error code means that you are having an electrical issue with either your heating element or the wiring. I would suggest testing your heating element with a multi meter before anything and checking to see if it is working correctly. If it is then you may have to look at your ground wiring. Good luck with your repair.

Hi Tanya, Thank you for your question. Sometimes it can. I would suggest testing it with a multi meter to see if it is indeed your issue. It should read between 0 - 50 ohms to be working correctly. If that part is fine, then it may actually be your electronic control board that is the issue. I hope that helps. Good luck with your repair.

Hello Mario, thank you for writing. The error indicates the Heater. This is the correct replacement for your model.

Hello Paula, Thank you for your inquiry. From your description, it does sound like the heating element as error code E64 indicates a heating issue. Hope this helps!

Hello Teresa, Thank you for the question. All the parts we sell are brand new OEM parts. Thank you for your inquiry, good luck with this repair!