Fresh Food Door Gasket WR24X10229

Hi Frances, Thank you for your inquiry. You do not have to remove the door to install the gasket. When installing your gasket, have a putty knife handy and remove the items from the door so they are not in the way. Use the putty knife to remove the existing gasket from the door and pull firmly around the door, but be careful not to damage the plastic inner liner of the door especially around the corners. Once removed use the putty knife to go around the door to clean out any excess styrofoam that may have come out and clean the liner on the bottom. Make sure the channel is clear. If the new gasket has any kinks in it you may soak in it warm water or place it in the dryer on a low setting to remove them. The new gasket has a rigid strip on the back that goes into the channel. It is important to make sure that the strip is placed fully in the channel and that the vinyl edge lays flat against the outer steel door panel. Drape the gasket over the door and start in one corner. Insert the strip fully into the channel in the the corner section and pull until it is square with the door. Then work it in around the door and make sure it is in nice and tight. It may be a bit difficult around the bottom of the door to insert it where there is no much room to work with. Once complete make sure it is in nice and tight. When you close the door there may be some areas that cause the door to bulge out. If this happens, use some adhesive tape to tape the door shut and this should help even those bulges out, then remove the tape. I hope this helps. Thank you and have a great day!

Hi Loandi, Thank you for your question. The part number listed under your model number for the freezer door gasket is PS2364915. The part number for the refrigerator door gasket is PS2364916. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hello Stephanie, thank you for reaching out. The door gasket, part number PS2364916, is compatible with your model. We hope this helps!

Hello Stephanie, thank you for contacting us. We have researched the model and found that this door gasket, part number PS2364916, is compatible with your model. If you require assistance to place an order, please contact customer service!