Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John R - April 10, 2020
Verified Purchase
Great oroduct
Easy to apply
★★★★★
★★★★★
Beatriz O - February 18, 2020
Verified Purchase
Really good product
Love it
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read moreoring refer handles. Thank you
Read less
Howard from Boynton Beach, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
22 of 57 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
March 9, 2018
My Whirlpool white drop-in stove has a section of the white trim, part 16 on the diagram, that is scratched. My question is whether I can use the spray white touchup paint for my model shown here for that area since it surrounds the ceramic cook top. i.e. is the paint flammable since the trim is so close to cooktop's heat?
For model number RS696PXGQ10
Hello Dave,
Thanks for your question. Unfortunately, this spray paint is not designed for high temperatures, so it is not recommended for this part.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Christine Gilbert-Thorburn
August 26, 2017
The top of the white control panel has been damaged, looks like it was melted by someone leaving on a hot pan. Can this paint be used to touch up or would it make more sense to replace the panel? Thank you.
For model number KESS907SWW06
Hello Christine, thank you for contacting us. If there is nothing melted but just damaged paint this will fix it up. Good luck with the repair!
Was this helpful?
Thank you for voting!
Deborah
January 26, 2018
I want to touch up a part on my Whirlpool stove. Is this paint compatible with that model or is there another one?
For model number RF376PXDQ1
Hello Deborah,
Thanks for your question. The touch-up paint compatible with your model in white is part number PS385132. If you needed almond, that is part number PS11743941.
I hope this helps.
Hi Judy, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Scott
January 18, 2019
Do i need to use a primer before painting an area where the original paint has lifted?Maytag washer/dryer combo spray paint. oem part manufacturer #350930
Hi Scott,
Thank you for your question. You should not have to use a primer before using the spray paint. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Brenda
October 17, 2019
Hello, can this paint be used to cover up rust inside a microwave oven?
Hello Brenda, thank you for your question. It is indicated that this Spray Paint is used with microwaves. If you can provide the model number for your microwave, we can see if there is a specific Spray Paint provided for it. We look forward to hearing back from you!
