Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gordon R - January 6, 2023
Verified Purchase
Easy leak fix
Our local dealer wanted over $190 for this pump alone then over $150 to replace it. It only takes 30+ minutes if u just even have minimal mechanical skills & tools. Save yourself some money!!
★★★★★
★★★★★
Jim G - August 15, 2018
Verified Purchase
Part fixed my issue
My dishwasher is back in service, very pleased, it was a perfect fit.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking out onto floor when not in use!
Remove front Fascia on floor, use AC sniffer find hot wires into unit. Flip circuit breaker at panel. Verify no AC, shut water valve off on Dishwasher supply. Disconnect two valve wires to solenoid. Use wrench set to find proper size and use to remove supply line. Unscrew two Phillips sheet metal screws that hold valve support bracket and
... Read more remove bracket with it now being held in by water inlet valve hose to interior wall of Dishwasher. Use Tin Snips to cut off metal band securing hose to old water inlet valve. Place new valve onto inlet hose, secure with new hose clamp (you must supply) tighten hex nut on clamp till water tight. Fasten wires onto the solenoid and mount assembly support bracket to dishwasher. Now connect water supply line after wrapping threads with pipe dope tape fasten and secure nut with adjustable wrench till water tight open supply valve and look for leaks with a flash light. If no leaks, reset breaker and test run and drain. No leaks replace fascia and have a Beer great Job saved $850 min. on a new dishwasher!
Read less
Paul from Belmont, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
September 3, 2019
Unit stopped draining. The filters and drain tube appear clean. What valve, switch or other part may be implicated?
For model number FDB2410HISO
Hello Don, thank you for your question. The issue could be with the float switch, board, or drain pump. Unfortunately, the switch is discontinued so we would recommend testing the pump first. If the pump is fine, the board may need to be replaced. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
October 18, 2023
I just bought the Water SupplyValve 5304482406 for this dishwasher. I see it doesn't come with a clamp for the dishwasher-side hose. What clamp should I get?
Thanks,
For model number FFBD1821MWOA
Hello Tim, thank you for reaching out. The clamp you are looking for is part number PS3496156. If you need help placing an order, customer service is open 7 days a week!
I see lots of similar valves for this same brand on the internet. This part is 112$ whereas the others are around 40$. I figure it's just a valve and a solenoid. Does it have to be this particular model? Model 154637401 is much more common. Would it fit? Mine is leaking from between sensor and assembly.
For model number FPHD2491KF0
Hi Kim,
Thank you for your question. The part number listed under your model number for the water inlet valve is PS3496157. To place an order for the part you may order it either online or by calling our customer service line at 1-800-901-6912 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.