Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not start. These fuses cannot be reset, so if yours has blown, you will need to replace it. A common reason for the thermal fuse to blow on a dryer is if the exhaust vent on your dryer is restricted or blocked. Hot air will be confined in the dryer and the fuse will trip and stop the electricity from flowing to the gas valve or heating element.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Earl M - July 17, 2024
Verified Purchase
Perfect fit, finish and function!
Perfect, no problems, no issues! Worked perfectly as expected!
★★★★★
★★★★★
Kevin B - November 23, 2021
Verified Purchase
Very Happy
Part came in fast and was very reasonably priced. My appliance is back up and running great!
★★★★★
★★★★★
Daniel G - April 3, 2018
Verified Purchase
Dryer Thurmostat
Part worked great!!
★★★★★
★★★★★
Kaysi G - June 26, 2018
Verified Purchase
Worked perfect
Fixed the problem.. thanks!
★★★★★
★★★★★
CARY H - December 19, 2020
Verified Purchase
Dryer working again!
This part was advertised as one of the two top reasons for the dryer not heating. I bought and replaced both, but later testing showed this part to be the one that got it working again.
★★★★★
★★★★★
Michael B - October 23, 2019
Verified Purchase
Thermal Fuse worked
The Thermal Fuse arrived quickly and worked when installed.
★★★★★
★★★★★
David S - January 22, 2020
Verified Purchase
Saved me $300 service call
Worked like a charm... Saved the $300 service call and the rip off increased price of the marked up parts from the service tech.
★★★★★
★★★★★
Don C - August 28, 2018
Verified Purchase
Living in the Middle of the Mountains you must be self-sufficient
When my dryer stopped blowing out heat, I knew the repair would be a problem. When I lived in the city, I'd simply call an appliance repairman and pay for the service. However, being 40 miles from the nearest town which isn't all that big anyway, I was on my own. Luckily, my brother-in-law came up a few weekends later and we were able to take the stacked dryer down. He's a pretty handy fellow, and between the two of us and YouTube, we took it apart. Using my volt-ohm-meter, he diagnosed a bad thermostat, but recommended I replace all three of them just to be safe. Using the PartSelect website, I found the model and a schematic that allowed me to quickly identify the OEM replacement parts which I ordered. They arrived on schedule several days later, and I was able to take the dryer apart again, install all the parts, and put the dryer back together. Luckily I was able to call a neighbor who helped me with the most difficult part - putting the dryer back on top of the washer. This wouldn't normally be a big deal, but the space is very tight and required some creative effort. Once reinstalled, I tested it and it worked like a champ. I have to say the website was extremely helpful with specific part numbers and descriptions that exactly matched the parts I removed. All in all, a pleasant experience from which I learned a lot.
★★★★★
★★★★★
Michael U - September 4, 2018
Verified Purchase
Just what I needed
All is good... fit exactly as expected... delivered in a reasonable time... dryer is working like it should! Thank you PartSelect!
★★★★★
★★★★★
Lou K - February 1, 2019
Verified Purchase
Part worked like a charm
Part worked as described but the real value was using PartSelect online video to help me diagnose the issue. This saved me significant time and money.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Heater wouldn't get hot - suspected thermal fuse
Removed the top, the control panel and the door. The heater assembly came out thru the front, without having to remove the drum. Easy replacement
Mark from Mendham, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Added air diverter on exhaust hose and blew out heat limiter fuse.
Entered dryer from rear exhaust port. Removed 2 screws and 2 clip on wires. A little awkward of process but superior method over disassembly of drum and main parts.
Robert from Jenkintown, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
when you push start button dryer does always start
order start button and was sent thermal, reordered and rep sent me a button that was not for my machine even though she had model no.,called third time and was told I had to order new control panel but they were not being manufactured any more.so it is not fixed
Harley from OKLAHOMA CITY, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer worked fine except the dryer did not heat up
I unplugged the dryer and disconnected the vent. I pulled the dryer away from the wall so I had room to work on it. Pulled the top cover off (slides back). Took the door off Took the front adjustable feet on the bottom off Unscrewed all of the face screws on the front of the dryer Took the two screws off of t
... Read morehe back of the control panel holding the control panel to the metal frame. Gently pulled on the control panel to reveal 4 screws under the control panel to be able to take the front cover off. Pulled the front cover off (the dryer door front cover). Pulled the dryer vent cover off (two screws). I could now see the heating element with sensor/fuse (right side). Did a continuity test (beep) on all visable sensors/fuses on the heating element. No beep on the thermal fuse (used website diagram to locate parts to test and replacement part numbers). Got the part after about a week, tested the parted (it beeped), replaced with new part and put dryer back together, plugged in and the dryer heated. Problem solved.
Read less
Catherine from COVINGTON, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
25 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wasn't heating up
Replaced thermal fuse
TERRY from NEW BOSTON, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat to my Dryer
1. Had to find out what was causing the problem by eliminating each part one by one using a multimeter. I got a video link from parts select on how to do this.
2. Then got another video link sent to me by parts select on how to take my dryer a part and replace the part.
3. Followed it step by step and it worked reall
... Read morey well.
4. The process was great except shipping was excessively high for such a small part.
Read less
James from ELLENVILLE, NY
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
10 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run with no heat
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal f
... Read moreuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Read less
Richard from ORMOND BEACH, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
87 of 100 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
60 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Miriam
April 15, 2018
On my LG electric dryer my cooling light stays on. The dryer runs but will not heat up? What could the problem be?
For model number DLE2250W
Hi Miriam, Thank you for the question. I suggest testing the Thermistor,PartSelect Number: PS3529026. When testing you will test for resistance. At 70 degrees the resistance should be 9.3K ohms, 90 degrees would be 7.7K ohms. at 100 degrees it should be 6.2K ohms, 120 degrees 4.3K ohms. If the thermistor reads outside of range then it needs replaced. Hope this helps!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Nicole
March 10, 2018
Our dryer was not drying or heating up at all! We changed the high limit thermostat and it heated up for two minutes, then it quit heating again. Can you help?
For model number DLE5955W
Hello Nicole,
Thanks for your question. There are a few parts you will want to test with a multimeter for electrical continuity. Replace any that do not show continuity. Test the thermistor, thermal fuse, temperature sensor, and the heater.
I hope this helps.
My dryer quit heating but will run i tested all thermostats and heating element all tested good except the thermal cut off fuse could this be the problem
Hello Cliff, yes this could be issue regarding your dryer not heating. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Raymond
October 4, 2017
What is the cut off temp. For this part. Also there's a part # 6931el3003c w/reset button can this switch be used in place of 6931el3003d? Also temp . For second switch?
For model number DLE5955G
Hi Raymond,
Thank you for your question. This part closes at 221 degrees and opens at 257 degrees. No you could not. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
January 31, 2018
Dryer does not even turn on. No lights on screen light up. Drum light does not come on ether. Ordered circuitboard from you folks after research. Did not fix problem. No activity on push button screen. If thermal fuse is blow will dryer lights light but will not start ? No one ever mentions this.Thanks !
For model number DLE1001W
Hi Larry,
Thank you for your question. If the dryer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch, the drive motor, the thermal fuse and the belt. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
January 9, 2018
The dryer does start but does not heat up , there was a fair amount of lint and other debris in the vent hose but has since been cleaned out..l read the dryer will not start if the fuse is blown , is that correct ?
Hello Tony, Thank you for your inquiry. That is correct. Lint buildup can cause the dryer to overheat and blow the thermal fuse. You should also check the high limit thermostat as well. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
December 12, 2018
Will a blown thermal fuse keep power from going to start switches and display panel?
For model number Dle2516w
Hello Mike, thank you for your question. Yes, this part can cause the unit to not start, but it shouldn't cause the control panel to go out and lose power. You can test the fuse with a multi meter to see if it has failed. When tested the part should read zero or close to zero when tested. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Peter
January 11, 2020
If the thermal fuse is no good will it show an open on a continuity test?
For model number DLEX5101V
Hi Peter. Your meter should read 0 ohms of resistance if the fuse is good. If the display/needle does not move that means it is a bad fuse. Thank you for your question and good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
February 25, 2018
It takes about two hrs. To dry a normal load of clothes. Checked vent lines and filter all are clear. Actually been like this for several years. Looking for any ideas you might have. Thanks!
For model number DLE8377WM
Hi Robert, Thank you for the question. There are a few parts you can check. There is the sensor, PartSelect Number PS3529161.The sensor controls the temperature in your dryer and will turn off once your clothes have reached the desired dryness level. If you notice that your dryer is not giving off enough heat to dry the clothes or is taking too long to dry, this may indicate that a repair to the senor is required. You can also check the Thermistor, PartSelect Number PS3529026.This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
November 19, 2018
Was the thermal fuse you suggested for the heater box or exhaust?? the heat was working great last monday
For model number Dlex7177rm
Hello Susan, Thank you for the question. This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
