EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account
Back
Back
Keep typing for more specific results...

Top Appliance Brands

See All >
Whirlpool Parts Whirlpool General Electric Parts General Electric Samsung Parts Samsung Frigidaire Parts Frigidaire

Top Lawn Equipment Brands

See All >
Toro Parts Toro Briggs and Stratton Parts Briggs & Stratton Husqvarna Parts Husqvarna Craftsman Parts Craftsman

Top Appliances

See All >
Dishwasher Parts Dishwasher Dryer Parts Dryer Stove Parts Stove Refrigerator Parts Refrigerator Washer Parts Washer

Top Lawn Equipment

See All >
Lawn Mower Parts Lawn Mower Chainsaw Parts Chainsaw String Trimmer Parts String Trimmer Hedge Trimmer Parts Hedge Trimmer Generator Parts Generator
Keep typing for more specific results...
Price Match Guarantee
Fast Shipping All Original Manufacturer Parts Genuine Quality 1 Year Warranty
Install videos!
Easy
3654179-1-M-GE-WD15X10014-Dishwasher Inlet Valve
Part Location Diagram of WD15X10014 GE Dishwasher Inlet Valve
See part 744 in the diagram
Replacing your General Electric Dishwasher Dishwasher Inlet Valve
3654179-1-S-GE-WD15X10014-Dishwasher Inlet Valve 360 view
( Grid squares measure 1x1 inch )
3654179-1-S-GE-WD15X10014-Dishwasher Inlet Valve 3654179-2-S-GE-WD15X10014-Dishwasher Inlet Valve 3654179-1-S-GE-WD15X10014-Dishwasher Inlet Valve 360 view
Part Location Diagram of WD15X10014 GE Dishwasher Inlet Valve Replacing your General Electric Dishwasher Dishwasher Inlet Valve
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

customerservice@partselect.com

Dishwasher Inlet Valve WD15X10014

 Fits your GHDA356N20SS!
★★★★★
★★★★★
56 Reviews

Really Easy 

30 - 60 mins 

Rated by verified customers
$ Price Match Guarantee
OEM badge Official OEM Part Guaranteed to Fit
$ 46.95
  In Stock
 Fits your GHDA356N20SS!
PartSelect Number PS3654179
Manufacturer Part Number WD15X10014
Manufactured by GE for General Electric, Hotpoint

Jump to:

Product Description

Dishwasher Inlet Valve Specifications

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Why buy the real thing?

OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.

OEM from PartSelect

  • Genuine brand name Checkmark
  • Guaranteed to fit Checkmark
  • Superior quality and durability Checkmark
  • 1 year warranty Checkmark

Generic

  • Unknown manufacturer X mark
  • No fit guarantee X mark
  • Inconsistent quality and lifespan X mark
  • Limited warranty and support X mark
Back to Top
You May Also Need ?
Affresh Dishwasher Cleaner Tablets - 6
$21.95
  In Stock
Washer Affresh Cleaner
$19.95
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$27.95
  In Stock
Refrigerator Produce Preserver
$17.80
  In Stock
Refrigerator Deodorizer
$29.86
  In Stock
Affresh Ice Machine Cleaner
$26.95
  In Stock
Back to Top
Part Videos

Replacing your General Electric Dishwasher Dishwasher Inlet Valve

Replacing your General Electric Dishwasher Dishwasher Inlet Valve
Back to Top
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water | Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
Part# WD15X10014 replaces these:
AP5632416, 2309993, WD15X10014, WD15X10011
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
56 Reviews
4.7
Filter By Rating:
  • 5 Stars
    48
  • 4 Stars
    5
  • 3 Stars
    0
  • 2 Stars
    2
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roberta M - January 31, 2020
  Verified Purchase
Easy repair great service. My dishwasher is working better than ever your company is stellar
Great service your company is really a good one
★★★★★
★★★★★
Michael T - February 26, 2018
  Verified Purchase
Easy to remove and replace
Easy to remove and replace, only had to slide the dishwasher out a foot or so from the cabinet to access it. Unplug power and have a little pan or something under the water hose to catch drips when you disconnect it. Use a socket wrench with an extension to reach the two mounting screws easily. Once the valve is unscrewed you can slide it out from under the dishwasher to disconnect the hoses and wiring harness.New valve connects to two hoses, wiring harness and gets screwed back into support housing.
★★★★★
★★★★★
Tony W - February 28, 2018
  Verified Purchase
Great from start to finish
The part arrived it a box much larger than expected. When I I opened it it was clear, lots and lots of bubble wrap. That was awesome. When awaiting an important part the one thing that causes me to cringe is how bad the package will be handled. Thank you Partselect for doing your part. The part was in perfect condition, installed in no time at all. Will use you guys again.
★★★★★
★★★★★
Tim M - June 26, 2020
  Verified Purchase
Quick and very easy repair!
The part arrived quickly and was easy to install. I am a repeat customer and I recommend this site to everyone because of the problem-diagnosing and problem-solving features of this parts supplier. The site gives the customer the likelihood which part is responsible for the problem you are experiencing, along with repair videos and appliance diagrams, invaluable!!!
★★★★★
★★★★★
Stanley W - June 26, 2020
  Verified Purchase
Fast service
The part fit perfectly and arrived sooner than expected.
★★★★★
★★★★★
John D - April 23, 2021
  Verified Purchase
Part was perfect fit
Great condition.
★★★★★
★★★★★
Charles K - September 27, 2018
  Verified Purchase
Arrived as agreed
Everything fit and works
★★★★★
★★★★★
Damon L - June 25, 2021
  Verified Purchase
GREAT!
Quick delivery , quality part!
★★★★★
★★★★★
Michael R - June 2, 2021
  Verified Purchase
Just the part I needed
All numbers matched, valve fit just like the original.
★★★★★
★★★★★
Amanda O - May 23, 2021
  Verified Purchase
Fast ship!
Part was exactly what I needed. Shipping was fast. Dishwasher back in action.
  • 1
  • 2
  • 3
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 17 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaking Solenoid valve
1.Shut off the electric! 2.Shut off the water Supply. 3.Removed the two lower front panels(Two bolts each) . 4.The Water supply Solenoid is located far left up front . 5. Unplug power connector clip to the solenoid. 6.remove the two mounting bolts . 7. Use pliers to compress the rubber hose clamp And slide down the hose . 8 some small amount of water maybe in the hose a pan maybe necessary under the solenoid. 9.Gently pull the rubber hose off the nozzle. Complete installation in reverse. May The Force Be With You!
Read less
  • William from ANNAPOLIS, MD
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blocked inlet valve
Removed kick panel and pulled out the unit from cabinet carefully. Turned off water and power. Removed the water feed and used an aluminum pie tin line a low-profile drip pan to catch the extra water and used a scrap towel to clean the dust and extra water spilling out. Used sockets and wrench to remove the old inlet and screwed out the housing to examine the old inlet. No real way to clean it. Honestly, I don’t see a reason for the filter. There’s no way to replace it and it’s not easy to change out anyway. The particles were so small they could have passed through and not harmed the system. A better and more practical place for any filter would be just in front of the inlet that could just pop in every 2-3 years as needed preventatively in 5 minutes. Anyway, I reassembled and tested. Water flow was great. I think it cleans better too because the hot water fills the plastic reservoir faster and stays hot to clean more effectively.
Read less
  • Timothy from DURHAM, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not fill with water
Ordered most likely part...water inlet valve.

1. Turn off water supply.
2. Remove the metal toe kick plate/insulation at the bottom of the
dishwasher.
3. Remove hose to supply valve.
4. Take electrical plug off old valve.
5. Remove float valve because it was mounted it right in the way of
the 2 screws on the inlet valve bracket.
6. Remove those 2 screws now you can get to them, and move the
inlet valve to one side so you can get to the hose clamp for the
rubber hose out of the valve going to the dishwasher.
7, Take the old valve and bracket out, mount new valve on the
bracket, crawl back down on the floor, reinstall rubber hose and
bracket, and float valve and finally inlet hose.
8. Turn water on. Check hose connections for leaks. Yep, outlet
hose didn't clamp enough now, allowing a drip.
9. Repeat the whole process AGAIN. Replace little clamp
with a REAL hose clamp, reinstall the thing again. No leak this
time.
10. Test run dishwasher thru a cycle. Check again for leaks at hose
connections. OK ? Reinstall insulation pieces and toe kick
plate.
Read less
  • James from JONESBOROUGH, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishes Weren't Getting Clean At All
The sump was very clogged with caulk like crud that we think was a chemical reaction from soap that was used the first two years. When I first started troubleshooting, the sump seemed to be the problem, so I replaced that. There was a small hose on the sump that was broken so it made sense to replace it anyhow.

When that didn't help I put the dishwasher into service mode and observed that there just wasn't enough water to spin the sprayer. Therefore it was a water quantity problem, which can be caused by either the Water Inlet Valve or the Flood Switch.

I ordered both the Water Inlet Valve and the Flood Switch, just in case. I replaced the valve first and when that worked I did not install the switch.

Installation was performed with the dishwasher still inserted in the cabinet. If you have big hands, pull the dishwasher out. With sockets and nut drivers, I was able to remove the assembly. After pulling it out enough to clear the dishwasher, I was able to get a screwdriver on the outlet side clamp and a wrench on the inlet side hose.

My old valve had a 90° elbow on it and that was difficult to remove. Installing the elbow on the new valve was just as bad. The valves don't have enough clearance to get a wrench on them to keep them from turning while the elbow is tightened.

TIP: Take a picture of the valve before removing/disconnecting anything. I don't know if the electrical connector can attach either way but I made sure to put it back on exactly the same way it was.
Read less
  • James from HGHLNDS RANCH, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leakage at valve
I watched the video that came with email on part. Gave instructions on how to. Thank you !
  • Jimmy G from SPRING, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking valve
Used teflon tape around new 3/8 elbow. Re-installed valve in originals postion. Connected supply hose and reconnected electrical to valve.
  • Gary from HAVERHILL, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
faulty valve
Turn off water .Remove 4 screws holding lower front panels.Remove panels, valve is on left . Remove 2 screws that hold valve , slip valve up over clip. Using pliers slide clamp back, remove hose from valve.disconnect wire clip , unscrew from water fill line. Install new valve in the reverse order
  • Joe from NEW RINGGOLD, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Valve leaked
Turn off power and water from dishwasher. Remove Base Access Panel. Remove the upper 2 screws that holds the dishwasher in place. Pull out dishwasher. Locate the valve and remove the 2 screws holding the mounting bracket. (I used a hex Nutdriver to remove the screws) Remove the valve. Disconnect the wire connector. Disconnect water supply. (Place a towel to catch the water) Loosen the hose clamp holding the inlet hose and remove the hose. (I used pliers to loosen the clamp) Remove the elbow from the old valve and reattach to the new valve. (Use teflon tape around the threads) Reverse the Process. Check for leaks. Piece of Cake. Part was an exact fit.
Read less
  • Thomas from LAS VEGAS, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The inlet pump stop working
Received part, removed lower panel and shut water and power off to appliance. Used flash light to see under dishwasher, removed the two screws that held part in place. Loosed clamp that held the water tube in place to part. Placed towel down to catch water. Pulled the line out so I could get to the nut that is attached to inlet part. Unhooked the plug after all water was gotten up. The main knuckle that's attached to the pump was on so tight that I took it to my local gas station for an mechanic to unscrew it for me....I have arthritis in my hands. Station is only two mins from me and wasn't a problem for them to do for me. Came back put fresh Teflon tape on joint and reattached it to new part. Attached all hoses and clamps, plugged electrical prongs back in and attached bracket back to body of dishwasher. Turned water on and checked for leaks. Turned power back on and ran a cycle of dishes to wash....all went well. If the knuckle was on so tight the job would have only taken about 40 min at best.
Read less
  • Vanessa from FT WASHINGTON, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a water leak in bottom of dishwasher.
I simply removed the bad part and reversed the process. It was very easy and a 12 year old could do it. Thanks for the online tips and recommendations. You saved me over 400.00 which is what a new unit would run. Plus installation. Many Thanks.
  • Russell from MADISONVILLE, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3654179
Manufacturer Part Number: WD15X10014
Brand
Model Number
Description
General Electric
ADW1100N00BB
Dishwasher
General Electric
ADW1100N00WW
Dishwasher
General Electric
ADW1100N10BB
Dishwasher
General Electric
ADW1100N10WW
Dishwasher
General Electric
ADW1100N15BB
Dishwasher
General Electric
ADW1100N15WW
Dishwasher
General Electric
ADW1100N20BB
Dishwasher
General Electric
ADW1100N20WW
Dishwasher
General Electric
ADW1100N30BB
Dishwasher
General Electric
ADW1100N35BB
Dishwasher
General Electric
ADW1100N35WW
Dishwasher
General Electric
ADW1100NB
Dishwasher - GE Dishwasher Model ADW1100NB Parts
General Electric
ADW1100NW
Dishwasher - GE Dishwasher Model ADW1100NW Parts
General Electric
CDW9380N00SS
Dishwasher - GE CAFE
General Electric
CDW9380N20SS
Dishwasher
General Electric
CDWT280V00SS
Dishwasher
General Electric
CDWT280V05SS
Dishwasher
General Electric
CDWT280V50SS
Dishwasher
General Electric
CDWT980R10SS
Dishwasher
General Electric
CDWT980R30SS
Dishwasher
General Electric
CDWT980V00SS
Dishwasher
General Electric
CDWT980V05SS
Dishwasher
General Electric
CDWT980V50SS
Dishwasher
General Electric
EDWF800P00BB
Dishwasher
General Electric
EDWF800P00WW
Dishwasher
General Electric
EDWF860P00SS
Dishwasher
General Electric
GDWF100R10BB
Dishwasher
General Electric
GDWF100R10WW
Dishwasher
General Electric
GDWF100R30BB
Dishwasher
General Electric
GDWF100R30WW
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

Contact Customer Service
Dishwasher Inlet Valve
$ 46.95
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.