Door Shelf End Cap - Left or Right Side Specifications
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf. It is white in color, made of plastic material and measures about 2 inches high by 3 inches deep. This might need to be replaced if it has broken or worn over time. This repair requires no tools. You will need to open your fridge, pull upwards on the existing end cap, and pull outwards. There is a locking tab on either end so it does not matter if the top or bottom comes out first. Slide the new end cap onto the rail and it is installed.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Door Shelf End Cap - Left or Right Side
Troubleshooting
This part works with the following products:
Refrigerator.
Part# 215267701 replaces these:
AP2110843, 444
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
5.0
Filter By Rating:
5 Stars
10
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Timothy A - July 17, 2024
Verified Purchase
Easy
Perfect fit
★★★★★
★★★★★
Mollie P - July 6, 2021
Verified Purchase
Door shelf end cap
Fit like a glove purchase was fast easy and I recommend this site for appliance parts!!!
★★★★★
★★★★★
Cassiem F - October 27, 2020
Verified Purchase
Exact part fit
Great replacement part. Fit perfectly. Easy to install. Fast shipping.
★★★★★
★★★★★
Kathryn C - April 17, 2019
Verified Purchase
Very easy
Part was exactly as pictured,, be sure you measure your space as I didn't and it was a tiny bit too long. Still works but bumps a little.
★★★★★
★★★★★
Timothy H - January 31, 2019
Verified Purchase
freezer door mshelf bracket
Worked very well, exactly what i needed. the shelf front was alittle higher in price than i wanted to pay so i fabricated my own. but theses parts were perfect
★★★★★
★★★★★
Larry P - November 8, 2018
Verified Purchase
GOOD AS NEW AGAIN !!!
I purchased this frig used and the bottem door shelf was there but not the end cap. Just slid the shelf into the end cap and popped it into the door. NOW I can use my lower shelf. Thanks and GOD bless.
★★★★★
★★★★★
Maureen C - August 11, 2018
Verified Purchase
great thanks
all good
★★★★★
★★★★★
Nancy U - June 30, 2018
Verified Purchase
easy repair
The part was received quickly and easily installed.
★★★★★
★★★★★
Bridget W - April 17, 2018
Verified Purchase
Exact part I needed
The part was the right part and it came all in tact and not a long wait. Door shelf is all fixed. Thank you??
★★★★★
★★★★★
Julie B - January 25, 2018
Verified Purchase
Worked great!
I needed it for the freezer door bracket. The orginal part was shorter, but this worked out just fine. It was easy to order and it got here fast!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 11 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My electric bill was super high. $450 for 1 month for a 1bdrm apt in NY city
I took a look at the web site where I purchased the parts, then I took a look at the paper enclosed with the order. Thankfully, I have a battery operated screw driver since there are so many screws. There are plenty of screws in my refrigerator and freezer doors. I thought that since my old door gaskets were all chewed up looking, if I
... Read more changed them, the 10 year old air conditioners and the old fashioned light bulbs to instant on energy saver light bulbs, the electric bill would become more manageable.
The refrigerator and freezer door gaskets were the first step. They were easy to swap out. You just need to empty the door of all food items, then pull back the old gasket to see the screws. There are alot of them. You should leave 2 loosened screws on each side of the refrigerator door to hold the panel in place while you work and remove the rest. Then you can remove the old gasket and slide the new one into place. Make sure as you tighten the screws and replace the ones you removed, the new gasket fits into the door panel groove securely and is in place as you tighen the screws. Make sure it is in place all the way around the door as you work. You repeat the procedure for the freezer using only one loosened screw on each side to keep the interior panel in place while you work. It takes some time due to the number of screws, but the work is pretty easy. I never even broke a nail.
The end caps for the shelf bars just snap into place just as the old ones can be snapped out with a bit of pressure. They do not have to be wrestled and you need to work carefully so that you do not break them. (I ordered an extra just in case, but I didn't need it. I will have it in case I need it in the future)
My electric bill dropped from $450 to $110 a month with all the improvements I made. Thank you Part Select for taking the fear of screwing it up, out of the repair process and making it manageable. I can afford my electric bill now. Thanks for your help.
end piece broken that held bar on freezer door shelf
attached the bar to the end piece and slipped it into the proper opening. Easy I ordered the piece one morning and received it the next morning. Great service.
Betty from Seal Beach, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door shelf ends broken off from constant pulling on door and slaming it with 2 gallons of milk in door.
Inserted the caps into the bar and snapped in door. That's it. No tools needed! Hope it last another 20 years
Katherine from Lafayette, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door brackets were broke off refridgerator
Put the end caps on the metal bar and put it on the freezer door and it snapped right in.
Very easy to do in less then 4 minutes to do both shelves.
Thank you very much.
Tonda from Holland, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken end caps
The end caps worked perfectly for both the Frigidaire and Westinghouse fridges. Just pulled out the old end caps and then literally just pushed in the new ones (remember to attach the shelf bar before attaching the second end cap!). The pieces arrived quicker than expected. Thanks Partselect!
Shelf end had broke and the top shelf would not hold food
order the part and when it came in I installed it into the door at the same time fitting the front guard and then snapping it into place. 5 minutes or less
Put the new ordered door end caps in place, everything worked fine.
Edward from Piscataway, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door shelf end caps were broken
removed broken end caps, took a small screwdriver and simply applied a little pressure to release them. Pushed new end caps into place (they just snap in). Presto done!!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carrey
January 24, 2022
Can’t tell whether I need PS 422925 or PS 422444 for shelf retainer end caps. They look the same. I’ll need both sides.
For model number 25378137891
Hi Carrey,
Thank you for your question. The part number listed under your model number for the freezer door end cap left or right side is PS422925. The part number listed for the refrigerator door end cap left or right side is PS422444. They are sold individually. If you would like to place an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!