Install videos!
473177-1-M-Frigidaire-5308000010 -Evaporator Fan Blade
Part Location Diagram of 5308000010 Frigidaire Evaporator Fan Blade
See part 5 in the diagram
Replacing your Frigidaire Refrigerator Evaporator Fan Blade
473177-1-S-Frigidaire-5308000010 -Evaporator Fan Blade 360 view
( Grid squares measure 1x1 inch )
473177-1-S-Frigidaire-5308000010 -Evaporator Fan Blade 473177-2-S-Frigidaire-5308000010 -Evaporator Fan Blade 473177-1-S-Frigidaire-5308000010 -Evaporator Fan Blade 360 view
Part Location Diagram of 5308000010 Frigidaire Evaporator Fan Blade Replacing your Frigidaire Refrigerator Evaporator Fan Blade
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Evaporator Fan Blade 5308000010

 Fits your F44Q21RJD0!
★★★★★
★★★★★
5 Reviews

Rated by 7 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 47.92
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your F44Q21RJD0!
PartSelect Number PS473177
Manufacturer Part Number 5308000010
Manufactured by Frigidaire
Product Description

Evaporator Fan Blade Specifications

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Refrigerator Evaporator Fan Blade

Replacing your Frigidaire Refrigerator Evaporator Fan Blade
Back to Top
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Kelvinator.
Part# 5308000010 replaces these:
AP2152058, 1083, 08000010, 216325600, 218649000, 3001215, 3001357, 75308000010, 8000010, C000040268, C000048770, C000048771, C000071211, C000071213, C000289200, C48770, G000126599, G000174705, G126599, G162599 , G164094, G174705, G185153, G98355, G98356, K1202161, K1202162, K1203079, K1209388, R000900758 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bonnie R - August 26, 2020
  Verified Purchase
Easy Peasy
The part came within a week. I learned so much about refrigerator repair and appreciate the ease at which this was completed! Much appreciation to Partselect.com for having this part! Saved a lot of money by repairing it ourselves!!
★★★★★
★★★★★
Bobbie N - October 22, 2019
  Verified Purchase
Quick repair. Fridge works like new again.
I went online to see if we could match the part. We had thought a fridge should last more than 3 years. This was the second fridge to break down right after extended warranty was out. The part was reasonable and arrived fairly quickly. It was an easy installation. Saved us the cost of a third fridge.
★★★★★
★★★★★
Matthew C - January 11, 2019
  Verified Purchase
Easy Fix
i replaced the fan and the fan motor at the same time and the instruction video was easy to follow. unfortunately it did not clear the error code so i had to purchase the control board and UI panel which did clear my error code.
★★★★★
★★★★★
Henry C - June 14, 2018
  Verified Purchase
Replacement Fan Blade
Arrived on time. The fan blade fit and performs as designed.
★★★★★
★★★★★
Michael K - April 15, 2018
  Verified Purchase
Worked great
Came in fast and was exactly what I needed
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
EVAPORATOR FAN MOTOR & BLADE
The service manual diagram shows the 149 complete fan shroud in a vertical (upright) position. Misleading! Of course.
The actual mounting of the lay in fan shroud fully assembled is in the horizontal position laying in a tray area just above the evaporator coil cage assembly. The entire shroud assembly can be installed incorrectly by the diagram and will still fit. BUT... no cold air will flow or be forced into the ice maker vent nor the refrigerator vent. I found this out the hard way by trial & error.
If the drawing had shown it in the horizontal position for both removal and reinstallation... it would have saved a lot of time and headaches. Also, the diagram does not show the (2) plastic angle supports on the shroud, another scratch your head event. Parts included on drawing... 149, 5, 8, 9, 13, 14 on CTFFHS2611PF4 diagram page of service manual.
ALSO, the (4) lower cabinet plate screws have to be removed, and the first left hand screw counting up to allow the next upper panel to swing out enough to lay the shroud in correctly (horizontal) on top of the evaporator coil cage. BOTTOM LINE... THE AIR FLOW HAS TO BE UP IN ORDER TO WORK PROPERLY.
Read less
Other Parts Used:
Evaporator Fan Motor Evaporator Fan Blade
  • Glen from HENDERSONVLLE, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a broken fan blade due to ice build up from a leaking ice maker.
1. I took out one screw on the ice maker and loosened the other two screws and unplugged and removed the ice maker.
2. Next I took out 2 screws from the bottom of the auger drive box and unplugged the wiring harness and removed the box. The wiring harness was a little tricky. The lock on the plug pushes in to unlock even though it looks like it pulls out,.
3.next you must remove 2 screws from the left side bracket that holds the auger box and remove the bracket.
4.Now take out 8 screws that hold the back panel in place and remove the back panel.
5. now your looking at the evaporator fan blade and motor. The simple way to replace the fan blade is to unplug the motor and remove it from the freezer. It just sits in with nothing holding it. The fan requires a little pressure but should pull right off. Install new fan blade and put everything back in the same order it was removed.
Read less
  • gary from ARANSAS PASS, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer making annoying high pitched sound (like a whine)
Parts Select included a video, and I watched a couple more that were on YouTube. Watch the video and do the repair . . . it's very easy took me about 35 min once I got the freezer emptied, including cleaning the freezer. I used a Philips head screw driver and I think it was a 5/16 nut driver . . . you can do this. Freezer running fine, no noise. One thing I would be careful on is removing the back plate that covers the fan and motor, the edges can be sharp and you could cut yourself removing the back plate. Also don't try to put the rubber gasket in before you replace the back plate, install the back plate and the rubber gasket goes in easy peasy :)
Read less
Other Parts Used:
Fan Motor Evaporator Fan Blade
  • Greg from NAVARRE, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud noise fan blade broke,off balance
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
  • EDWIN from ELWOOD, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy fan
1. Removed the 7 nuts using the nut driver from the freezer back panel inside the freezer.
2. Remove the back panel. The evaporator motor and fan are located above the coils.
3. Unplug the wiring harness.
4. Remove the two gold mounting screws holding the motor and fan in place.
5. Remove the motor and fan including the brackets.
6. Install the new motor and fan onto the mounting bracket.
6a. Attach the green ground to the mounting bracket.
7. Screw the two gold screws back into the freezer.
8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness.
9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes.
10. Turn the freezer on to see if the fan turns on.
11. Reinstall the back panel.
All done!
Read less
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor Kit
  • Jordan from Maumee, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
153 of 180 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Evaporator Fan Burnt Up
The fan motor all but caught the inside of the freezer on fire . Had to remove then clean, and I mean clean the walls of the freezer . Then had to pry out the old fan without breaking anything . Replacement of new fan was quick and easy because all the parts that I needed were in the bag
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor Kit
  • ROY from PENSACOLA, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
28 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lighting hit the house
first i by passed the timing board, with a ele cord to the fan motor to keep the fridge cool till your parts got here, which was realy fast delivered,
the fan would come on because the board was fried.
it took abot 30 min to install every thind just be carefully unpluging anything.things will break i guess metal eing cold makes the conne4ctors stick together.
evaporator fan is in the frezzer four screws,tested the wires for ohms,and power, when i pluged in the fan i would loss power to the fan,that told me the board was bad, the same night my furnance when to (reaaly) and i lost my borad on the computer ethernet card (lighting isn't fun) it cost to fix everything about 130.00 thanks for thr great parts
Read less
Other Parts Used:
Evaporator Fan Motor Kit - 120V 60Hz Adaptive Defrost Control Board Evaporator Fan Blade
  • keith from villa rica, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
31 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
You May Also Need ?
Evaporator Fan Motor Kit - 120V 60Hz
$76.55
$76.55
  In Stock
FAN MOTOR EVAP 115V
$93.55
$93.55
  In Stock
Evaporator Fan Motor Kit
$102.04
$102.04
  In Stock
Produce Preserver Filter
$21.56
$21.56
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.62
$12.62
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.14
$19.14
  In Stock
Affresh Cleaner
$19.14
$19.14
  In Stock
Cooktop Cleaner
$17.79
$17.79
  In Stock
Affresh Ice Machine Cleaner
$20.56
$20.56
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS473177
Manufacturer Part Number: 5308000010
Brand
Model Number
Description
Frigidaire
15304-0A
Refrigerator - REFRIGERATOR
Frigidaire
15304-7A
Refrigerator - REFRIGERATOR
Frigidaire
177040A
Refrigerator - REFRIGERATOR
Frigidaire
177047A
Refrigerator - REFRIGERATOR
Frigidaire
17714-0A
Refrigerator - REFRIGERATOR
Frigidaire
17714-7A
Refrigerator - REFRIGERATOR
Frigidaire
178040A
Refrigerator - REFRIGERATOR
Frigidaire
178047A
Refrigerator - REFRIGERATOR
Frigidaire
20462151B
Refrigerator - Refrigerator
Kenmore
25314772100
Freezer
Kenmore
25314772101
Freezer
Kenmore
25314772102
Freezer
Kenmore
25314772103
Freezer
Kenmore
25316562100
Freezer
Kenmore
25316562101
Freezer
Kenmore
25316572100
Freezer
Kenmore
25316572101
Freezer
Kenmore
25321021100
Freezer
Kenmore
25321021101
Freezer
Kenmore
25321021102
Freezer
Kenmore
25321021103
Freezer
Kenmore
25321021104
Freezer - UPRIGHT FREEZER
Kenmore
25321021105
Freezer
Kenmore
25321041100
Freezer
Kenmore
25321041101
Freezer
Kenmore
25321041102
Freezer
Kenmore
25321041103
Freezer
Kenmore
25321041104
Freezer
Kenmore
25321041105
Freezer
Kenmore
25321041107
Freezer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Evaporator Fan Blade
$ 47.92
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.