Ball Bearing 4280EN4001C

Washer Gasket

Richard from CUMMING, GA
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set

10 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Drum was making a very load grinding sound

I took the washer completely apart and ordered any parts that looked worn and put it back together. It’s working like new and will last for a few years

willard from RIVERSIDE, CA
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Very nosey

Replace both bearings and seal also replace spider gear due to the bearing seal surface damage,also replace drum gasket and door gasket and all shock absorber.The clean up two more time then the repairs did.

Other Parts Used:

Leg Assembly

Lonnie from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Very noisy when tub was spinning , tub bearings and seal were bad.

Watched a YouTube video on how to disassemble the washer step by step, replace the bearings, and reassemble the machine. was very helpful.

Other Parts Used:

Washer Gasket

Gerald from CENTRALIA, KS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bad/worn drum bearings

Followed the step-by-step video, you end up taking most of the washer apart. Got the drum out & apart, then ran into a wall with the bearings. Couldn't get them out - acted like the housings were frozen. Took all the pieces of the washer to the curb for garbage pickup.
I never opened the replacement parts and will be returning them.

Other Parts Used:

Gasket

Michael from DUBLIN, OH
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable)

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

< Prev
1
Next >

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.

Sort by:

< Prev
1
Next >

Donald

July 5, 2021

When replacing the rear tub bearing should any other parts be replaced? Can bearing be replaced or should tub assembly be replaced? What is bearing part # and cost and what is rear tub bearing assembly part # and cost? Thank you. Don

For model number WM2277HB

Hello Donald, Thank you for the question. When replacing the Bearings we also suggest replacing the Rear Tub Gasket. We hope this helps!

1 person found this helpful.

Was this helpful?

Thank you for voting!

Related Parts:

Rear Tub Gasket

$23.06

$48.28

Casey

November 3, 2023

There are two bearings in the back of the washer. Do I need to order two or do two bearings come with 1 order?

For model number 79641182311

Hello Casey, Thank you for the question. This model lists one Ball Bearing Part #: PS7785069 and One Ball Bearing Part #: PS11711138. The Bearings are sold separately. We hope this helps!

Was this helpful?

Thank you for voting!

Related Parts: