Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This kit includes the female contact with wires, terminal block and mounting clip.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael M - June 11, 2019
Verified Purchase
Perfect
Wnd time I used a part from parts select and both times the part worked perfectly
★★★★★
★★★★★
CHERYL G - October 23, 2019
Verified Purchase
Exactly as described
The replacement part came sooner than expected. Easy ordering. Fair pricing. Easy to install (I've done this before!) via Youtube video. Let's hope this one lasts until we need to buy a new stove.
★★★★★
★★★★★
Leo P - August 4, 2018
Verified Purchase
so easy anyone can rewire surface burners
EASY to fix almost fixes itself. unplug from wall raise stove top remove top back panel assemble wiring to terminal block remove old wiring {unplug}, install new wiring terminal. replace back panel lower stove top plug into wall, and your done less than 20 min.
★★★★★
★★★★★
John A - April 4, 2018
Verified Purchase
Perfect fit
Easy to install and fit perfectly
★★★★★
★★★★★
Christopher A - November 21, 2020
Verified Purchase
Very simple repair!
I ordered this part for one of my rental units as the original surface burner terminal piece along will all the wiring to the motherboard was missing. I didn't know anything about it until one of the tenants had mentioned it to me. I received the part rather quickly and installed it, the tenant could not believe how quickly it could be installed. I'm happy that I found your site as it makes it helpful to find parts to all appliances with helpful diagrams of the appliance so you know exactly what to purchase. I will definitely be using your site for all my appliances throughout my rental properties in the future! Thanks again, Chris.
★★★★★
★★★★★
Caroline G - January 24, 2019
Verified Purchase
Fast shipping!
Fast shipping and just the part I needed. Very satisfied with the service would use them again!
★★★★★
★★★★★
Jackie K - October 10, 2020
Verified Purchase
Easy Repair
The part was in great condition and came fast. My appliance is back in working order.
★★★★★
★★★★★
Mark C - September 26, 2019
Verified Purchase
Successful Repair
easy repair, part fit well, part came quick, great company to deal with.
★★★★★
★★★★★
Howard B - October 3, 2018
Verified Purchase
Burner terminal
I may have order this part in error. I hve installed burner contrlls and everyting working normal. T\I will keep the part ,in case I might need it in the uture, Thanks
★★★★★
★★★★★
Josh M - August 6, 2018
Verified Purchase
Parts fit, worked well thank you
Parts fit, worked well thank you
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Terminal block connectors worn out wasn’t making a good connection with the stove top burner
Cut 4 inch’s off the new terminal block wires then using my wire strippers stripped 1/2 inch off the ends , the old terminal block wires I stripped 1/2 inch at the ends using a wire nuts on both wires and electrical tape connected the terminal block to the stove plugged the new burner in and the burner worked 100%.
Lance from HAHIRA, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It was burned out
I just follow Steve's Installation Vidio. My range works. Thanks Steve
lan from SANTA CLARA, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My front big burner on My stove had stopped working.
I went online and and saw a man on Utube that had the same problem with His stove and He had His video showing how to fix it so I ordered the part from Parts Select using My model number from My stove and took the old broken part off and installed My new part all by Myself. It has been working great and I am so glad to have it working ag
... Read moreain.
I UNPLUGGED THE WIRE, ASSEMBLE THE BURNER ELEMENT KITS LIFTED UP THE SURFACE BURNER PANEL, OPENED THE BACK RANGE COVER, UNSCREW THE NUT HOLDING THE BURNER CONNECTOR, DISCONNECT THE REPLACEMENT WIRES ON THE BACK PANEL TRACE THE NEW WIRES CLIPS TO THE BACK PANEL & TIGHTEN THEM WITH EXISTING NUTS SCREW THE OTHER EN
... Read moreDS BACK WITH NUT HOLDING THE BURNER CONNECTOR
Read less
QUANG from LANCASTER, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two blocks kept shorting out.
After watching the video and ordering the parts and searching for the right size socket (which took most of the time) and finding medical tape as I had no electrical tape I took of the back unhooked the terminals and following the wires to determine which ones needed to be replaced I followed the video instructions on reverse as my son h
... Read moread spliced new terminal blocks into the old wires I taped each new wire to the one it was replacing and pulled it through the back of the stove and into the front attached the new wires to the new block and pushed the clips on the other end of the wires to the knob boxes. I rolled up the excess wire and taped it securely with medical tape so it wouldn't unravel and be in the way when I reattached the back shield on the stove. After I repeated the process for the second terminal (I had two that kept shorting out) I reassembled the stove plugged it back into the wall and used both burners that night to cook dinner! I have had no problems with those burners since then. Really if you watch the video first and follow the instructions you should have no problems. It is really quite simple if someone hasn't tried to repair the problems without replacing the wires. Splicing new blocks into old wires just doesn't work. If I have this problem again, which I hope I don't, I will be confident in my ability to fix the problem myself. Thank you parts select for repair video and the parts.
Read less
Evelyn from FRANKLIN, NH
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced burner and it worked perfectly!
All I had to do was to plug the burner in and it worked.
I unhooked the main power cord, unhooked the worn out block terminal cut the tape that was holding all the wires together. Removed the back panel and followed the wires unhooked the 2 wires and installed the new block terminal. Tied all the wires back, attached the back panel and plugged the power cord back into the outlet. i tested the b
... Read moreurner to see if it was working. The burner is working great, instructions were easy to follow and my wife is happy. Thank you
Read less
Mario from RENO, NV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the outlet the one of the top burners on top of my stove, it went very well.
I followed the instructions on the video, the only thing they left out is where the wires go through to the back of the stove being that there are sharp edges. A role of glass tape would have been handy to replace the old tape. Thanks for asking, I hope this helps someone else.
Charles from MECHANIC FLS, ME
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner was not heating
unplug it and plug the new one in
lucille from HAPPY CAMP, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
20 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marty
December 6, 2017
How many burners will this kit fix? I want to replace all 4, from the switch all the way to replacing the connector block for the burner. Thank you!
For model number ABS300J1WW
Hi Marty,
Thank you for your question. These kits only contain enough parts to replace one element terminal block. You would need to buy 4 kits. I hope this helps. Thank you and have a great day!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
October 5, 2017
The front large burner on the stove is over heating - turns bright red even on low setting. What part needs replacing?
For model number JBP25D0K4WH
Hi Patricia,
Thank you for your question. It could either be the switch that controls your front burner or the burner itself that is the issue. You would have to test both parts to see which one is broken. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Mickey
October 14, 2017
I need the right front wire big burner in front it is a long one this comes 2 connect from end 2end
For model number jbp23d-r2ww
Hello Mickey, thank you for contacting us. This kit would have all the wires or the surface burners included. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
ANNE
August 16, 2017
Do i need to buy 4 of these if i am replacing all 4 brown plastic thingies
For model number JDP39BOW5BB
Hello Anne,
Thank you for contacting us.
These kits only contain enough parts to replace one element terminal block. You would need to buy 4 kits.
I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Alfred
August 28, 2017
My ceramic Receptacle is completely burnt and fall apart into many pieces, will I need to buy item 83 together with item 82 , or can I use the original clip with item 83? The original clip looks ok.
For model number jbp23sr5ss
Hi Alfred,
Thank you for the question. As long as the clip is okay then it can be refused.
Good luck with the repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
April 22, 2018
My surface burner light will not go off but stove is off stove works fine and turns off.Can you let me know the problem and part numbers i need to replace
For model number Jbp21bb1wh
Hi Robert,
Thank you for your question. If the surface burner light will not go off, then this is issue is with one of the burner switches and you will need to check each one with a multimeter to see which one is causing the issue. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Harold
March 11, 2019
Will this part fix burner from going to high no matter the setting on the control knob?
For model number JBS07H2WW
Hi Harold, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Deborah
September 24, 2019
My large front burner when turned on low with in 2-3 mins is glowing red hot . I’ve tried switching the burner but same thing so i know it’s not the same element itself,on your website it looks like there are only 2 possible things.What do you recommend.Thank you deb Hayward
For model number JBP23SR5SS
Hello Deborah, Thank you for the question. This normally indicates the switch that controls the element PartSelect Number PS236750 is defective and will need to be replaced. Hope this helps!
Hello Rosario, Thank you for the question. Yes, this Terminal Block Kit works on both size burner elements. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nina
August 14, 2021
My GE range is just over 1 year old. Last night the front right burner heated red hot when on medium. I use that burner all the time and it has never over heated. When i turned the burner off, it did turn off. When i pulled the burner out of the terminal, i saw some red residue on the plug of my burner in the terminal too. I'm reading about people replacing either the switch or the terminal. Would this be a terminal replacement?
For model number JBS360DM2BB
Hello Nina, Thank you for writing. Yes you are correct to choose Surface Burner Terminal Block Kit PartSelect Number PS783534. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Wire Plug or Connector","title":"Wire Plug or Connector","url":"/Range-Wire-Plugs-and-Connectors.htm"},{"position":3,"name":"WB17T10006","title":"WB17T10006","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
