Refrigerator P-Trap Drain Tube Kit W10619951

Hi Harold, Thank you for the question. It sounds like the P-Trap might be blocked or needs to be replaced. The p-trap drain tube kit may also be known as the duck bill, or the drain pipe. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. Hope this helps!

Hi Robert, Thank you for your inquiry. Yes, this part has been redesigned by the manufacturer but should still work with your model according to your model information. I hope this helps. Good luck with your repair.

Hi Patricia, Thank you for your question. To purchase this part, you may order it online on our website, through one of online chat sessions or by calling our customer service line and anyone would be happy to assist you. I hope this helps. Thank you and have a great day!

Hi David, Thank you for the question. I suggest replacing the P-Trap tube if you are not able to clean the tube out. Hope this helps!

Hello Larry, thank you for your question. Yes, the P-Trap Drain Tube Kit PartSelect Number: PS8691807 will work with your unit. You don't have to defrost the unit to replace the P tube, but we would recommend defrosting the unit to be sure the majority of the frost is gone in the unit. I hope this helps!

Hi Philip, thank you for your question. It could if that is what the issue is. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So it is suggested you check them first. I hope that helps. Good luck with your repair.

Hello Larry, thank you for your question. If the channel is frozen, or clogged you will want to defrost the unit before replacing the trap. If not, you can replace it without defrosting. There is also an installation video at the following link https://www.partselect.com/PS8691807-Whirlpool-W10619951-P-Trap-Drain-Tube-Kit.htm I hope this helps!

Hi Ed, Thank you for your question. The part number listed under your model number for the drain tube kit is PS8691807. If the there is ice buildup at the drain tube, there is likely debris in it preventing water from draining. The water will pool on the floor and then freeze. The drain tube will need to be either cleaned out or if it is damaged, it will need to be replaced. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.

Hello Jean, thank you for contacting us. We would recommend checking the door gasket and making sure it is properly sealed. Sometimes dehumidification of leaking warm air can cause the issue of ice build-up and leaking. It also looks like your refrigerator is not defrosting properly. We would recommend checking the defrost thermostat, part number PS11743535, and the defrost heater, part number PS11738606. Please also ensure that the drip pan, part number PS11756973, is not damaged and is placed correctly. Please reach out to customer service if you need help placing an order. Glad to be of help!

Hi Ganesh, Thank you for the question. Yes, the PS8691807 is the correct P-Trap for the model number provided. Hope this helps!