Average Repair Rating: 2.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A rat got under the dishwasher and chewed up the electric’s and the hoses
A rat got under the dishwasher and chewed up the electric’s and the hoses. Only found out when the air light came on drain not working Lots of water underneath as well as all kinds or shoot insulation and rat droppings had to wear a mask affect him use a bunch of Clorox before I could diagnose it a real party And hard to reach corners.
... Read morer /> I ordered four parts since I found a better deal on the main electric cable which a rat head chewed through until it had an electrocuted itself. These four parts came in three different boxes and three different deliveries over two weeks. not efficient. But handwashing is over put it all together and it works I soaked the hose in hot water so I could fit it on.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
February 24, 2020
Hi, this dishwasher is over filling and causing code e15..i have searched hi and low and cannot locate a fill, or float switch for this unit...can you tell me what may be the problem ,or where water level sensor is located? thanks ,dave
For model number SHE68T52UC/02
Hi Dave,
Thank you for your question. According to the Bosch website, the E15 error code on the Bosch dishwasher informs a user that the leakage protection has worked. This means that water has got into the machine tray or the float has stuck (a special switch that activates the protection system). The float is located inside of the tub at the bottom of the dishwasher and the float switch is located beneath the tub directly below the float. The float lifts as the water level in the dishwasher rises, and when the proper water level is reached, the stem of the float activates the float switch to turn off the water inlet valve. A malfunctioning float or float switch could cause the water level to be too high and create a leak. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Frank
March 16, 2023
replaced wash motor easy job now e15 showed on display and only drain pump runs could float switch be stuck
For model number shs863wd2n/11
Hi Frank, thank you for reaching out. According to our research, the e15 error code is caused by too much water in the base of the dishwasher. We would recommend checking the float, part number PS8728720, float switch assembly, part number PS8737139, drain hose, part number PS8737004, and drain pump, part number PS11704799. We hope this solves your problem!