Poulan Lawn Mower Parts

Why Genuine OEM Matters

Shop By Appliance Type Shop By Part Type

Popular Poulan Lawn Mower Parts

Your Price

$6.36

Poulan Lawn Mower Lock Nut

PartSelect Number PS16381786

Manufacturer Part Number 596039201

Lawn Mower Grassbag Frame – Part Number: 585054702

Your Price

$29.95

Poulan Lawn Mower Grassbag Frame

PartSelect Number PS11824788

Manufacturer Part Number 585054702

Washer 5/16 Std Flt – Part Number: 596134901

Your Price

$5.16

Poulan Lawn Mower Washer 5/16 Std Flt

PartSelect Number PS16381824

Manufacturer Part Number 596134901

Installation Instructions

robert from EUREKA, CA

transaxle rotated forward on 2015 Husqvarna YT42DXLS

2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair.

HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.

HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.

HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.

HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.

HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.

HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...

Lawn Tractor Mandrel Assembly – Part Number: 587819701

Your Price

$46.33

Poulan Lawn Mower Lawn Tractor Mandrel Assembly

★★★★★

2 Reviews

PartSelect Number PS12087499

Manufacturer Part Number 587819701

Lawn Mower Idler Pulley – Part Number: 587969201

Your Price

$7.72

Poulan Lawn Mower Idler Pulley

★★★★★

1 Review

PartSelect Number PS11824875

Manufacturer Part Number 587969201

Lawn Mower Hex Head Bolt – Part Number: 584953901

Your Price

$4.13

Poulan Lawn Mower Hex Head Bolt

PartSelect Number PS9982804

Manufacturer Part Number 584953901

This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is damaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Lawn Mower Hairpin Clip – Part Number: 532003146

Your Price

$4.13

Poulan Lawn Mower Hairpin Clip

PartSelect Number PS9007536

Manufacturer Part Number 532003146

This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable to corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.