Roper Refrigerator Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Roper Refrigerator Switches
Your Price
$29.29
In Stock
Roper Refrigerator Door Switch
PartSelect Number PS12728638
Manufacturer Part Number W11384469
Door switch turns the light off when you close the door.
Fixes these symptoms
- Light not working
- See more...
Installation Instructions
Clint from Rayville, MO
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Read more...
Your Price
$19.85
In Stock
Roper Refrigerator Micro Switch
PartSelect Number PS11738948
Manufacturer Part Number WP2162361
This switch is located inside the dispenser.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Leaking
- See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
Read more...
Your Price
$39.75
In Stock
Roper Refrigerator Door Light Switch
PartSelect Number PS11738900
Manufacturer Part Number WP2149705
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.
Fixes these symptoms
- Light not working
- See more...
Installation Instructions
Randy from Hays, KS
Broken light switch
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps ) the wiring is almost self explanatory. then it gos back to the way you took it off. OH! and don't forget to turn the light bulb all the way back in to the socket , so the light will work after you take the time to install it yourself.I had the water supply line from under the box to the water dispenser in the door and the total bill on that was one hundred thirty seven and a hand full of change.Don't be afraid to do it yourself the savings is enough on one one item to make several months payments on a new one Randy the "Handy Man'
Read more...
Roper Refrigerator Switch
PartSelect Number PS16218024
Manufacturer Part Number W11457217
This part turns the light on/off as the door opens and closes.
Fixes these symptoms
- Light not working
- See more...
Roper Refrigerator Range Selector Switch
PartSelect Number PS11744483
Manufacturer Part Number WP7403P172-60
Introducing the Whirlpool Selector Switch, a genuine OEM part designed to ensure the optimal performance of your appliance. This specific model is suitable for selected models of Whirlpool, guaranteeing compatibility and seamless operation in your appliance. Despite appearances, the size and shape of this selector switch may possess modest variations among parts, showcasing the preciseness and unique design in each piece. With its trusted Whirlpool name, this intricate component offers reliable support for your appliance's functionality. Before finalizing your purchase, confirm that this Selector Switch aligns perfectly with your model to guarantee an unparalleled fit. Trust in Whirlpool's quality and let this exclusive Selector Switch enhance your appliance's performance today.
Roper Refrigerator Compressor Relay And Overload
PartSelect Number PS371538
Manufacturer Part Number 4387913
May differ in appearance, but functions same as original.
The overload protects a motor from overheating and the relay boosts the compressor.
Fixes these symptoms
- Clicking sound
- Freezer section too warm
- Fridge and Freezer are too warm
- See more...
Installation Instructions
Robert from Austin, TX
Fridge Air On, Not Cooling
Previous issue with this refrigerator and I figure after the Hot summer we've had in TX that it overworked itself this summer in the garage! Caught this one before all was lost as it started it's not cooling cycle on a Sunday. Ordered the identical Relay&Overload from Parts Select, 2 days later I'm back to chilling the beer again! Super service with diagrams and specs. Very glad parts select is around!
Read more...
Roper Refrigerator Start Device
PartSelect Number PS1486705
Manufacturer Part Number 8201769
This part includes the Relay, Overload and Cover. ***Please NOTE: The manufacturer has made changes to this part and may appear different than the original part. This part requires assembly.
Fixes these symptoms
- Freezer section too warm
- Will Not Start
- See more...
Installation Instructions
BECKY from El nido, CA
Refridgerator would not get cold
Replaced two parts that we got from Partselect.com and fixed it.
Read more...
Roper Refrigerator Compressor Relay And Overload Kit
PartSelect Number PS371273
Manufacturer Part Number 4387535
The compressor relay and overload kit is an assembly for your refrigerator. The function of the overload is to protect the compressor from overheating by being mounted to the side of the compressor. The purpose of the relay is to boost the compressor. This assembly comes with two smaller plastic pieces that are less than two inches by one inch. One is black and the other is white. The kit also comes with a red wire tubing. The most common reason for needing to replace the overload and relay is if your fridge is too warm or will not start.
Fixes these symptoms
- Fridge and Freezer are too warm
- Fridge too warm
- Will Not Start
- See more...
Installation Instructions
SAL from UPLAND, CA
Refrigerator stop working
First I removed the relay and over load and exam. Saw that the relay was burnt. Before I order the part I check to see if the compressor was still working by jumping the common start and run terminals.It did. I also checked the start capacitor with a capacitor tester it was good. I than order the part which came the very next day.Installed the part
Read more...
No Longer Available
Roper Refrigerator Start Relay
PartSelect Number PS11770133
Manufacturer Part Number W10920279
This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the required speed. You may need a new relay if your appliance is too warm or will not start. The tools you will need to make this repair include a flat-blade screwdriver and a pair of needle-nose pliers. This start relay measures to be just over one square inch.
Fixes these symptoms
- Clicking sound
- Freezer section too warm
- Fridge and Freezer are too warm
- See more...
Installation Instructions
Michael from Carlisle, PA
Refrigerator would not cool, start relay was shot.
I ordered the three parts from the diagram for my model. The new relay was not at all similar to the old one (3 connections instead of 2, new cover. Seareching for about an hour on the web I found some blogs that helped. In case anyone else asks, here is the answer. The old relay had two connections - white wire to one and 2 orange wires to the other. The new relay had three connnection - they are numbered on the relay, attach as follows - White to #3, orange from capacitor to #2, orange from harness to #1. Blue stays with overload. I am surprised that the so-called experts had no idea what to do, but a simple homeowner was able to figure it out!! Fridge works perfectly now..
Read more...
Roper Refrigerator Compressor Start Device Kit
PartSelect Number PS993073
Manufacturer Part Number 8201786
This kit has been redesigned and the wiring may be different than the original. It will possibly need to be installed by an appliance repair person.
Fixes these symptoms
- Clicking sound
- Freezer section too warm
- Fridge and Freezer are too warm
- See more...
Installation Instructions
Laune from Front Worth, TX
Both freezer and refrigerator stopped cooling
Compressor Start Divice kit, I took off back lower panel with the 1/4 inch nut driver, on the compressor their was a wire hook that held the starter in place used my plyers to unhook, pulled the unit off plug the new unit in reappled the clip it was so easy I had to exame it severl to time to make sure that was all their was to it. put the cover back on and turn the refrigerator on and it has work great, I did not install the Bi-Metal Defrost Thermostat it was not needed.
Read more...
Related Roper Refrigerator Parts
- All Roper Refrigerator parts
- Roper Refrigerator Brackets and Flanges
- Roper Refrigerator Caps and Lids
- Roper Refrigerator Compressors
- Roper Refrigerator Dispensers
- Roper Refrigerator Doors
- Roper Refrigerator Drawers and Glides
- Roper Refrigerator Fuses
- Roper Refrigerator Handles
- Roper Refrigerator Hardware
- Roper Refrigerator Hinges
- Roper Refrigerator Hoses and Tubes
- Roper Refrigerator Ice Makers
- Roper Refrigerator Lights and Bulbs
- Roper Refrigerator Motors
- Roper Refrigerator Seals and Gaskets
- Roper Refrigerator Thermostats
- Roper Refrigerator Trays and Shelves
- Roper Refrigerator Valves
- Roper Refrigerator Wheels and Rollers
- Roper Refrigerator Wire Plugs and Connectors