Snapper Snow Blower Parts

Shop By Appliance Type Shop By Part Type

Popular Snapper Snow Blower Parts

Your Price

$4.99

Snapper Snow Blower Pin, Shear, 1-3/4

PartSelect Number PS9999468

Manufacturer Part Number 703063

Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A Shear Pin will break when you hit a large chunk or ice or other debris. Once it is broken, it will need to be replaced. You will need pliers to complete this repair. Customers rate this repair as Easy.

Your Price

$15.30

Snapper Snow Blower Gear Universal

★★★★★

3 Reviews

PartSelect Number PS9903020

Manufacturer Part Number 1718593SM

The OEM Universal Gear attaches on the chute control rod, and meshes with the worm gear in order to adust the chute. Using the part is rated as "Medium" difficulty by customers, and requires pliers, a socket set, wrench set, drift punch and hammer. If the part breaks there may be broken or chipped teeth which will prevent it from adjusting the chute, and should be replaced. This part is constructed of metal and comes in gold. Refer to your make, model and diagrams to ensure this part is right for your machine.

Installation Instructions

James from PLAISTOW, NH

replace worn PLASTIC discharge chute linkage gears

start with chute auger and punch out roll pins and cotter pin, reassemble linkage with METAL universal gears Read more...

Shear Bolt and Nut – Part Number: 707555

Your Price

$13.58

Snapper Snow Blower Shear Bolt and Nut

PartSelect Number PS12668206

Manufacturer Part Number 707555

Shear bolt and nut kit

Your Price

$5.99

Snapper Snow Blower Nut-Hex 5/16-18

PartSelect Number PS9999668

Manufacturer Part Number 703409

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Knob, 5/16-18 Wing (Black) – Part Number: 703065

Your Price

$7.59

Snapper Snow Blower Knob, 5/16-18 Wing (Black)

★★★★★

4 Reviews

PartSelect Number PS9999469

Manufacturer Part Number 703065

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

Your Price

$3.99

Snapper Snow Blower Bolt, Carriage

PartSelect Number PS9999542

Manufacturer Part Number 703185

Your Price

$8.83

Snapper Snow Blower Bearing, Ball

PartSelect Number PS8887153

Manufacturer Part Number 1705897SM

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lubricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

Your Price

$3.99

Snapper Snow Blower Plug

PartSelect Number PS9081222

Manufacturer Part Number 7011024YP

This OEM plug is sold individually and measures just over an inch in diameter. It attaches to the case cove of your equipment, is black in color, made of plastic and will need to be replaced when the old plug is dry out, cracking, or generally showing signs of wear. You may observe grease leaking out if this part needs replacing. Dirt can also get into the case if it is cracked, and cause problems over time such as a grinding noise. This is a somewhat challenging repair that requires a screwdriver, pliers, and a wrench.