Troy-Bilt Edger Parts

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797

Your Price

$22.11

Troy-Bilt Edger Fuel Tank Assembly W/Fuel Lines Incl. 29

★★★★★

1 Review

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Installation Instructions

Robert from ORANGE, CA

One of the two fuel lines cracked and leaking

Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover Read more...

Edger Blade – Part Number: 781-0080-0637

Your Price

$9.16

Troy-Bilt Edger Blade

PartSelect Number PS9129938

Manufacturer Part Number 781-0080-0637

This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.

Bearing .62" I.D. x 1.38" O.D. x .437" Thk. – Part Number: 941-0155

Your Price

$25.45

Troy-Bilt Edger Bearing .62" I.D. x 1.38" O.D. x .437" Thk.

PartSelect Number PS9167498

Manufacturer Part Number 941-0155

This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. You will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.

Lawn Mower Ground Drive Belt – Part Number: 954-04032B

Your Price

$26.85

Troy-Bilt Edger Lawn Mower Ground Drive Belt

★★★★★

1 Review

PartSelect Number PS9172714

Manufacturer Part Number 954-04032B

3/8 x 36-1/8-inch This ground drive belt (part number 954-04032B) is for lawn mowers. Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels. Wear work gloves to protect your hands when installing this part.

Bell-Wash..515" I.D. – Part Number: 936-0255

Your Price

$3.93

Troy-Bilt Edger Bell-Wash..515" I.D.

PartSelect Number PS9166826

Manufacturer Part Number 936-0255

Star Knob 5/16-18 – Part Number: 720-04072A

Your Price

$7.00

Troy-Bilt Edger Star Knob 5/16-18

PartSelect Number PS9109078

Manufacturer Part Number 720-04072A

This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. This part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.

Cable-Wheel Adjust – Part Number: 946-04036

Your Price

$18.49

Troy-Bilt Edger Cable-Wheel Adjust

PartSelect Number PS9179266

Manufacturer Part Number 946-04036

This wheel adjustment cable is used for both lawn edgers and trimmers and measures 32.75-inches in length. Featuring a metal cable insulated with rubber, this cable is used to raise or lower the blade within your equipment to control the cutting depth and is connected to a lever near the handle. Depending on your model, the installation instructions may vary, so check your user manual or any relevant diagrams for assistance.

Bearing, .625 X 1.574 X .470 – Part Number: 941-0524A

Your Price

$23.46

Troy-Bilt Edger Bearing, .625 X 1.574 X .470

PartSelect Number PS9491339

Manufacturer Part Number 941-0524A

Your Price

$13.55

Troy-Bilt Edger Torsion Spring

★★★★★

1 Review

PartSelect Number PS9301385

Manufacturer Part Number 732-0188A

A torsion spring is a grey, metal spring which comes individually sold. It provides tension on triggers and switches and has other applications depending on the equipment. If broken, there will be no tension and the part should be replaced. Installation is rated as Medium difficulty and requires a wrench and socket set.