Troy-Bilt Generator Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Troy-Bilt Generator Parts
Your Price
$19.38
In Stock
Troy-Bilt Generator Fuel Valve W/bushing
PartSelect Number PS8911051
Manufacturer Part Number 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor.
This part is found on the underside of the fuel tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
James from PICAYUNE, MS
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Read more...
Your Price
$45.46
Special Order
Troy-Bilt Generator Fuel Gauge Cap
PartSelect Number PS9314364
Manufacturer Part Number B4363GS
This OEM replacement fuel gauge cap is designed for use in generators. It comes in a cylindrical shape and has a built-in window to easily view the fuel levels without pulling out the entire cap. It is approximately 5.25 inches in length, while the head has a diameter of 3 inches. The purpose of the cap is to cover and protect the fuel gauge, which indicates the levels of gas available in the tank. It prevents dirt and debris from entering the gauge area and prevents fuel from leaking out. A faulty cap will allow contaminants to enter the gauge, and cause fuel to leak, leading to inaccurate fuel readings and safety risks. Twist the cap to remove it and clean the surrounding area thoroughly. Place the new gauge cap in position and ensure that it is locked in place.
Your Price
$31.83
In Stock
Troy-Bilt Generator Leg Support
PartSelect Number PS9940365
Manufacturer Part Number 312510GS
Upgrade your appliance with this Briggs and Stratton Support Leg. This incredibly durable and well-designed part is designed specifically for Briggs and Stratton appliances, ensuring a seamless fit and superior performance. As a product of a brand known for quality and reliability, this Support Leg offers exceptional stability and support. Perfect for those who appreciate high-quality appliance parts and straightforward improvements, this product is a reliable and smart choice for any Briggs and Stratton appliance owner. Enhance the longevity and functionality of your appliance with this essential component from a brand esteemed by professionals and homeowners alike.
Your Price
$63.69
In Stock
Your Price
$35.02
Special Order
Troy-Bilt Generator Engine Starter Solenoid
PartSelect Number PS9064363
Manufacturer Part Number 691656
A starter solenoid, also known as a starter relay, is an electrical component that is used within small engine systems to control the starter motor by engaging it when an ignition key is turned - acting as a bridge between the battery and starter motor. This starter solenoid is designed for use with various models of lawn mower and other small engine equipment and is sold as an individual part with no securing hardware. Depending on your model and type of equipment, the location of the starter solenoid may be different, but it is typically located on or around the engine block, and close to the battery. If you notice issues with starting your equipment such as clicking sounds, intermittent starting or simply not starting at all, the solenoid may be burnt or damaged and need replacement immediately. You can test the solenoid for continuity on its terminals with a multimeter, but make sure to take safety precautions. To replace a starter solenoid, you need only disconnect the equipment from power, locate the solenoid, disconnect and remove any connections and securing bolts before you can replace it and test for full functionality.
Installation Instructions
Bruce from CARNATION, WA
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Read more...
Your Price
$120.00
In Stock
Troy-Bilt Generator Voltage Regulator
PartSelect Number PS9270265
Manufacturer Part Number 205858GS
The OEM voltage regulator or voltage control is a part used to regulate the voltage so it can provide the right amount of power to electrical components. It attaches inside the alternator housing. The part is black and 2 x 3.5 inches. If damaged, the voltage will become too low/high and the part should be replaced. This part requires a voltmeter to use properly. Please refer to your make, model, and diagram to ensure this is the correct part.
Your Price
$121.48
In Stock
Your Price
$10.94
In Stock
Troy-Bilt Generator Cricuit Breaker
PartSelect Number PS9919917
Manufacturer Part Number 209872GS
This circuit breaker is an important safety device found in the control box of your generator. It protects the electrical system from overloads and short circuits by automatically cutting off the electricity flow when it detects excessive current. It can handle a maximum current of 20 amps. You can tell if a circuit breaker is broken by checking for visible signs of damage, such as an unresponsive button, cracks, or burnt marks. If the circuit breaker repeatedly trips, the breaker may be faulty or overloaded. You will need a screwdriver, a set of pliers, a socket set, and a nutdriver to replace the breaker in your generator. Follow the instructions in your user manual to access the control box. You typically need to remove the carburetor and the fuel tank before removing the cover of the control box. Please note that this OEM replacement part is sold individually.
Your Price
$7.82
In Stock
Your Price
$25.41
In Stock
Troy-Bilt Generator Brush Holder Assembly
PartSelect Number PS9063496
Manufacturer Part Number 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached springs. You can usually find the holder assembly inside the generator housing, near the rotor and stator assembly. If the holder assembly is broken, it can cause improper electrical contact between the brushes and the rotor, leading to a loss of electrical current transfer. Additionally, over time, the brushes will wear down from use, resulting in inconsistent contact with the rotor. Look for visible signs of damage like cracks, breaks, or deformations in the holder. A damaged holder can cause unstable voltage, power surges, or your generator failing to generate electricity altogether. To remove the existing brush holder assembly from your generator, refer to your user guide for detailed instructions. It may involve removing a cover or access panel to reach it. Use a nut driver or suitable tool to disconnect the assembly from the rear-bearing carrier and any connected wires. Remember to magnetize the brush assembly and conduct a generator test after installing the new one. Please keep in mind that this authentic OEM part is sold individually.
Troy-Bilt Generator Appliance Types
Related Troy-Bilt Generator Parts
- Troy-Bilt Generator Bearings
- Troy-Bilt Generator Caps and Lids
- Troy-Bilt Generator Exhausts
- Troy-Bilt Generator Wire Plugs and Connectors
Popular Troy-Bilt Generator Models
Below are the most popular Troy-Bilt Generator models we have. Enter your model number in the search box to find your model.
- 030247 Generator
- 2001 PTO Generator
- 01925 Troy-Bilt Generator Model 01925 Parts
- 030245 Generator
- 030248 Generator
- 030237 Generator
- 030377-0 030377-0 - 3,250 Watt Troy-Bilt
- 030247-0 030247-0 - 8,000 Watt Troy-Bilt
- 030387-0 030387-0 - 8,000 Watt Troy-Bilt
- 1924-2 1924-2 - 3,550 Watt Troy-Bilt
- 030477A-00 030477a-00 - 7,000 Watt Troy-Bilt Xp
- 030476-00 030476-00 - 6,000 Watt Troy-Bilt
- 030477-00 030477-00 - 7,000 Watt Troy-Bilt Xp
- 030478A-00 030478a-00 - 7,000 Watt Troy-Bilt Xp
- 030477A-01 Portable Generator
- 1923-0 1923-0 - 1,000 Watt Troy-Bilt
- 030446-0 030446-0 - 5,500 Watt Troy-Bilt
- 9828-0-52401 9828-0 - 52401, 6,000 Watt Troy-Bilt
- 01924 Generator
- 030247-1 030247-1 - 8,000 Watt Troy-Bilt