Vent Hood Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Vent Hood Parts
Your Price
$36.70
In Stock
Vent Hood Filter
PartSelect Number PS11769929
Manufacturer Part Number W10915369
This grease filter is designed for use in range hoods. It is sourced directly from the equipment manufacturer and has dimensions of approximately 7 1/2 inches wide, 8 3/4 inches in height, and 1/2 inches in depth. The filter is responsible for trapping grease, smoke, and other odors created during cooking, and preventing them from circulating back into the kitchen. It has an aluminum mesh layer which primarily captures grease particles, and a charcoal layer, also known as a carbon filter, which primarily absorbs and reduces odors and smoke particles. Carefully lift out the old filter from the range hood and dispose of it. Align the new filter in its compartment and secure it in place with the appropriate fasteners.
Your Price
$38.95
In Stock
Vent Hood Combination Grease And Odor Filter
PartSelect Number PS223976
Manufacturer Part Number WB02X10700
This is a combination grease and odor filter and it is designed for your range hood and microwave. This part removes grease and odors by filtering the air while you are cooking. The most common reason for needing to replace this part is if your older model has worn and dirtied over time. This part is roughly 9 inches long by 11 inches wide. The combination filter has a half-inch frame and the entire filter is chrome colored.
Installation Instructions
Helen J. from Landisburg, PA
Replace grease and oder filter
To replace a filter, on my range, i just pull down on the old ,and push up tp place the new one in. the were no screws ,to take out. I would like to say, that the time it took , to place my order and recive it was great. i could not be more pleased . i will be in touch, again, whenever, i need a part ! thank you.
Read more...
Your Price
$26.95
In Stock
Vent Hood Range Hood Fan Blade
PartSelect Number PS952006
Manufacturer Part Number WB02X11025
This part is the replacement fan for your range hood. It is made of white plastic and is approximately 7 inches in diameter. The fan blade helps to dissipate smoke and smells from your range. The main reason you would want to repair the fan blade is if it is damaged, and will not rotate. To remove the fan, use a pair of pliers to grab the retaining clip, and pull the fan blade off the shaft of the motor. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Installation Instructions
Danny from DICKSON, TN
Exhaust fan broke
Pulled filter, pulled little clip that holds fan on to motor shaft. Placed new fan on (make sure turned right way, hard not to) put clip in place put filter back on. Done.
Read more...
Your Price
$19.95
In Stock
Vent Hood Range Hood Fan Switch
PartSelect Number PS953545
Manufacturer Part Number WB24X10129
This is the replacement fan switch for your range hood. When you turn the knob to turn the range fan on, the fan switch is actuated. If your fan will not turn on when the knob is turned, you most likely have an issue with the fan switch. The fan has a main square portion with a red center that connects to the fan control knob. The main portion is approximately 1 inch in diameter. This part is sold individually. Be sure to disconnect the power source from your range before you begin this repair.
Installation Instructions
Morgan from College Station, TX
FR Burner out and range hood switches broken
pulled oven out in the open, unplugged from outlet, removed two white front side panels, removed four screws on sides, unplugged range from harness, removed top, unscrewed two metal clips that hold element in place, gently removed wires from element using a small screwdriver and needle nose pliers and attached each one to the new element as it was removed. Reinstalled as I took apart. For the range hood, I unplugged the hood, removed the covers to the switch box and used a small screw driver to open/destroy the old switch and to save the tinned wires. I then pushed in the wires into the new switch as I removed them from the old one. Should be careful to only snug up the hex nuts as the plastic switch stem will probably break easily with a little force.
Read more...
Your Price
$17.95
In Stock
Vent Hood Range Hood Light Switch
PartSelect Number PS953546
Manufacturer Part Number WB24X10130
This is the replacement light switch for your range. It comes with the actual switch, and the hex nut that goes with it. The switch is approximately 1 ¼ inches by 1 ¼ inches, and the hex nut is approximately ½ an inch in diameter. When you press the switch, it allows you to turn the range light on and off. If the light does not come on when you hit the switch, you may need to replace it. Be sure to disconnect your microwave from the power source before you begin this repair. This part is an authentic OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Joseph from FLORENCE, NJ
The plastic part of the switch that screws into the hex nut broke off.
First, unplug the range hood, then remove the switch cover plate, held by two Phillips screws. Remove the switch knob and the hex nut on the front of the hood.(In my case, the hex nut had snapped off with the threaded part of the switch in it.) Then gently pull the switch away from the hood and write down which color wire (black, yellow, white) connects to which receptacle on the switch. The receptacles on the rear of the switch are marked L,1,2 and 3. 3 is left blank. Snip the wires from the switch, getting as close to the body of the switch as possible. Pulling them from the push-in receptacles doesn't work. Using a wire stripper, strip off about 1/2 inch of the wire insulation. Twist the exposed wires tightly and insert into the appropriate receptacles so that no bare wire shows. Insert the face of the switch into the hole on the hood so that the threaded portion protrudes. Using the hex nut provided, tighten snugly with an adjustable wrench. Do not over-tighten. Reattach the knob. Most of this repair went quickly and smoothly, but, despite repeated efforts, the threaded portion of the new switch did not fit through the original hole in the hood. As a result, I used a drill to enlarge the hole. The result was satisfactory but the new switch is not seated as well as the original. The knob does not line up exactly in the On, Off, Nite Light positions.
Read more...
Your Price
$27.26
In Stock
Vent Hood Microwave Grease Filter
PartSelect Number PS1847969
Manufacturer Part Number 6802A
If the microwave exhaust fan is not circulating air properly, there could be an issue with the grease filter. A dirty filter will cause your microwave to run less efficiently and can alter the taste or smell of your food. Filters should be changed every six months for maximum performance. These silver, aluminum filters are sold separately, and are approximately 13 3/8 inches long x 5 7/8 inches wide. Measure your current filter to assure correct replacement. Check your grease filters regularly for particles and grease buildup to see if cleaning is necessary. If there is any visible damage to the filter, it should be replaced straight away.
Fixes these symptoms
- Exhaust fan not working
- See more...
Installation Instructions
Joseph from Las Vegas, NV
Dirty Grease Filter
Slide grease filter about 1/2 inch to right (or left) using the d-ring attached to one side and then pull down and out. Push charcoal filter frame slightly to rear and pry down from front. Install new charcoal and grease filters by reversing process. No tools - 5-minutes max!!
Read more...
Your Price
$31.95
In Stock
Your Price
$45.95
In Stock
Vent Hood Light Bulb
PartSelect Number PS11773829
Manufacturer Part Number WB25X24863
Enhance the functionality of your range hood with this GE Light Bulb, specially designed to illuminate the surface underneath your hood. Allow this precision engineered bulb to lighten up your cooking area and improve visibility during your culinary endeavors. It's installation is straightforward, but always refer to your range hood's owner's manual for comprehensive guidance. Make sure to procure this GE light bulb for a perfectly lit cooking space. A vital element for your kitchen comfort and safety. Remember, when it comes to your home appliances, trust only the high-grade GE products for relibable performance.
Your Price
$30.95
In Stock
Vent Hood Lamp Socket
PartSelect Number PS12170321
Manufacturer Part Number WB18X27245
This lamp socket is designed for use in range hoods. It is an authentic manufacturer replacement that holds the light bulb securely and provides the electrical connection needed for the bulb to function. If the socket has a loose/faulty connection, or it is damaged or worn-out, the light bulb will either fail to turn on or it will flicker. Ensure that the range hood is disconnected from power before beginning this replacement. Pull the light bulb cover off and gently twist the light bulb off. Carefully remove the faulty socket by twisting it counterclockwise and disconnecting it from the wiring. Position the new socket on the mounting surface and reattach the wire connectors. Insert the bulb into the socket and reattach the protective cover/lens.
Installation Instructions
T from MACCLENNY, FL
Lamp socket broke.
Pulled stove out. Turned switch off to hood lights. Checked power with power indicator tool, make sure off. Remove plate. Remove socket, cut wires, place wires in new socket . Replace plate.
Read more...
Your Price
$46.95
In Stock
Vent Hood Refrigerator Halogen Bulb 20w 12v
PartSelect Number PS951718
Manufacturer Part Number WB01X10239
This light bulb is a 12 Volt/20 Watt bi-pin base halogen lightbulb, meaning it emits a bright, white light which is similar to natural daylight and is inserted into its socket, as opposed to being rotated in. This bulb specifically is designed for use and compatible within various makes and models of home appliances, such as refrigerators, microwaves and ranges, and is sold individually. This halogen bulb can last up to 2000 hours and will begin to emit a yellow-ish tint or diminished brightness as it ages and deteriorates.
Installation Instructions
Edward from Averill Park, NY
Halogen bulb beneath microwave lighting the stovetop burned out after 9 mo.
Unscrewed the light cover beneath the microwave with a phillips head screwdriver. The bulb is very tiny and has 2 straight parallel prongs that slide into 2 small holes. Grab bulb from both sides with each hand firmly and slide STRAIGHT out (no twisting or pushing). Don't worry about breaking even though it may take a fair amount of pressure to pull out. New bulb arrived within a couple of days. Due to high shipping cost, suggest buying 2 or more bulbs at once. Bulb is often used as a kitchen night light so that is probably why I only got 9 months out of it.
Read more...
Vent Hood Brands
- Dacor Vent Hood
- Frigidaire Vent Hood
- General Electric Vent Hood
- Gibson Vent Hood
- Jenn-Air Vent Hood
- Kenmore Vent Hood
- KitchenAid Vent Hood
- Maytag Vent Hood
- Uni Vent Hood
- Whirlpool Vent Hood
Popular Vent Hood Models
Below are the most popular Vent Hood models we have. Enter your model number in the search box to find your model.
- 6
- C202 Broan Range Vent Hood C202
- C201 Broan Range Vent Hood C201
- JV348L2SS
- ZVC36L1SS Electric
- FHWC3055LSA
- JV347H1WW Electric
- JVW5301SJ1SS RANGE HOOD
- JV347H1BB Electric
- FHWC3655LSA
- JVB94SH1SS
- ZV750SY4SS
- PLHV36W6KC
- A405
- JVB37H1BB Electric
- KIRD861HSS0
- JVB67H1BB Electric
- JV338H1WW Electric
- JV636H2SS
- ZVB36SH1SS Electric