Westinghouse Washer Dryer Combo Wire Plugs and Connectors

Your Price

$54.95

Westinghouse Washer Dryer Combo Dryer Terminal Block Kit

★★★★★

2 Reviews

PartSelect Number PS419369

Manufacturer Part Number 134101400

This kit includes 3 screws and 3 terminals.

Installation Instructions

Arthur from Grand Prairie, TX

Terminal Block Melts when power cord connector is left loose by install crew.

1) Removed Top Dryer Cover (pushed 2 compression clips on front side 1" from top and 2" in from each side) to gain access to terminal block in rear.
2) Removed 2 screws over terminal block cover and 2 screws holding bad terminal block in place. Removed 3 screws holding bad power cord,
3) Removed good terminal connectors from bad terminal block and reinstalled them in the new terminal block.
4) Cut dryer wire from bad terminal block connector and soldered (optional) them to the new terminal block connector. Installed this connector into the new terminal block.
5) Installed new terminal block in dryer with 2 screws.
6) Installed new power cord on new terminal block ensuring contacts were tight and cord had pull guard properly installed. Reinstalled terminal block cover with 2 screws.
7) Reinstalled Dryer Top Cover. Read more...