Whirlpool Ice Maker Seals and Gaskets

Your Price

$54.40

Whirlpool Ice Maker Silicone Rubber Adhesive

PartSelect Number PS11740605

Manufacturer Part Number WP279368

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any internal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

Your Price

$95.65

Whirlpool Ice Maker Door Gasket

PartSelect Number PS16745146

Manufacturer Part Number W11624959

Presenting the Door Gasket from Whirlpool, a crucial appliance part that ensures your model functions with optimal efficiency. This gasket creates an airtight seal to prevent cold air from escaping your appliance ensuring efficient performance. Manufactured by Whirlpool, known for their unparalleled quality and durability, this part is designed to fit perfectly and provide a long service life. Ideal for maintaining the energy efficiency and performance of your appliance. Trust in the reliability of Whirlpool to provide high quality replacement parts for all your appliances.

Your Price

$7.95

Whirlpool Ice Maker Washer Water Inlet Hose

★★★★★

2 Reviews

PartSelect Number PS11738697

Manufacturer Part Number WP16123

If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Rubber washers are tasked with enhancing the seal between the hose and washer. A faulty or damaged washer will not be able to perform this properly, and water will be able to leak from the poor connection. This OEM part is sold individually, so make sure you order the quantity that is needed. The washer measures 1 1/16 inches x 5/8 inches.

Fixes these symptoms

Leaking
See more...

Installation Instructions

Jerome from Wichita Falls, TX

Cold water slow to fill tub

I started by shutting off the hot/cold water and unplugging the washer...from there, the back panel(secured with approx. eight bolts) was removed; it proved to be the project's most difficult task. The inlet valve was very easy to remove: removed a couple bolts that secured it to the back panel, disconnected the two electrical plugs and water fill hose. The new valve was installed by reversing the above steps; take note to follow the supplied directions as the electrical plugs must go on the valve in a prescribed manner. The back panel actually goes on easier than it comes off. When reinstalling back panel, be sure the water diverter is properly positioned before securing back panel. The diverter can be seen by opening the washer's lid...it's the plastic thing that channels water into the tub. After reassembly, new water supply hoses and washer were installed, moved washer back into place, plugged it in and all worked like new. Read more...

Your Price

$10.95

Whirlpool Ice Maker Fill Tube Gasket

PartSelect Number PS11738269

Manufacturer Part Number WP1106508

Fixes these symptoms

Leaking
See more...

Installation Instructions

Sandra from Temecula, CA

ice maker was leaking water

Parts went right into place as the pictures showed and was working again in about 30 minutes. The only thing that wasn't working was the ice took forever to make, but solved that problem by turning up the temp in the freezer. Read more...