Kenmore Washer Dryer Combo Ducts and Vents
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kenmore Washer Dryer Combo Ducts and Vents
Kenmore Washer Dryer Combo Dryer Exhaust Duct Kit
PartSelect Number PS3633049
Manufacturer Part Number W10470674
This kit is used for the bottom and side exhaust. The kit includes both the straight and elbow vent.
Installation Instructions
Mark from San Diego, CA
Needed to change rear exhaust to the side to fit dryer into my closet.
First, I opened up the front of the dryer and then unscrewed the entire back piece. I assembled the new exhaust piece from the kit. Next, I took out the old straight rear exhaust and then replaced it with the elbow shaped left eshaust from the kit. Lastly, reattache the back and front pieces of the dryer.
Read more...
Kenmore Washer Dryer Combo Blower Housing Rear
PartSelect Number PS8689122
Manufacturer Part Number 137551800
Kenmore Washer Dryer Combo Duct-air
The bottom line is that the back removes easily. You should:
1. unplug and remove the exhaust shoot
2. remove the top per YouTube or other source
3. take off the back panel over the electrical connections and unscrew the ground; tuck it inside. Don't undo any electrical connections except the ground
4. take off the screws holding the back on (8-9, one is hidden above the exhaust vent) and pull it out of the way; you then have compete access to the "DUCT-AIR" part
4. undo the clip that holds the vent tube (from the heating element) to the part
5. remove the screws that hold the part to the inside back (3?) and push it out of the way
6. remove the clips and remove the old part
7. reassemble in reverse order
I'm over 70 so I took lots of time and breaks but was still done in under two hours. The 2 clips holding the heater element tube to the part were badly rusted and should have been replaced but I made do with the old ones. Read more...
PartSelect Number PS11741422
Manufacturer Part Number WP3387911
Introducing the DUCT-AIR from the trusted brand Whirlpool. This is a genuine OEM piece that is designed to work compatibly with selected models of Whirlpool appliances. Key to your appliance's functionality, this DUCT-AIR facilitates the flow of warm air from the heater to the back of the dryer and into the drum, assuring efficient operation. Remember to unplug the dryer while installing this part and wear work gloves to ensure hand safety. This mastery engineered part is sure to be the exact fit you need, just be sure to verify its compatibility with your model before ordering. Choose Whirlpool for trusted, high-quality parts.
Installation Instructions
Thomas from Edgartown, MA
Screen on the hot air vent disintegrated
It is odd that this part needed replacement but I am in an area near the Atlantic ocean in a vacation house which is vacant most of the year. The exhaust vent probably brings excessive moisture down to the dryer in the basement. The screen you can see at the inside back of the tumbler (where the heated air enters) rotten out, pieces fell inside and there was danger of something falling in and catching fire. I found no useful source for information (including YouTube) as this part is most easily replaced from the rear of the dryer and the available info was about repairing the heating element, the circuit board, or the exhaust venting pieces which is done from the front.The bottom line is that the back removes easily. You should:
1. unplug and remove the exhaust shoot
2. remove the top per YouTube or other source
3. take off the back panel over the electrical connections and unscrew the ground; tuck it inside. Don't undo any electrical connections except the ground
4. take off the screws holding the back on (8-9, one is hidden above the exhaust vent) and pull it out of the way; you then have compete access to the "DUCT-AIR" part
4. undo the clip that holds the vent tube (from the heating element) to the part
5. remove the screws that hold the part to the inside back (3?) and push it out of the way
6. remove the clips and remove the old part
7. reassemble in reverse order
I'm over 70 so I took lots of time and breaks but was still done in under two hours. The 2 clips holding the heater element tube to the part were badly rusted and should have been replaced but I made do with the old ones. Read more...
Kenmore Washer Dryer Combo Blower Housing Assembly
PartSelect Number PS3507555
Manufacturer Part Number 5304485558
Introducing the genuine, OEM-quality Blower Housing Assembly from Frigidaire. This blower housing unit comes complete with a foam seal, ensuring a snug and secured fit. Uniquely crafted to suit certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan, it offers the highest compatibility and efficiency. The housing cover provides robust protection to the blower fan wheel while assisting in directing the airflow throughout the dryer. Before you start the installation procedure, remember to unplug the dryer for safety. A pair of work gloves is recommended for added protection during installation. Trust only the best for your appliances with Frigidaire.
Kenmore Washer Dryer Combo Duct Exhaust
PartSelect Number PS12342967
Manufacturer Part Number WE14X27556
Kenmore Washer Dryer Combo Extension Exhaust Kit
PartSelect Number PS334303
Manufacturer Part Number 279823
Related Kenmore Washer Dryer Combo Parts
- All Kenmore Washer Dryer Combo parts
- Kenmore Washer Dryer Combo Agitators
- Kenmore Washer Dryer Combo Bearings
- Kenmore Washer Dryer Combo Belts
- Kenmore Washer Dryer Combo Brackets and Flanges
- Kenmore Washer Dryer Combo Caps and Lids
- Kenmore Washer Dryer Combo Circuit Boards and Touch Pads
- Kenmore Washer Dryer Combo Dispensers
- Kenmore Washer Dryer Combo Doors
- Kenmore Washer Dryer Combo Drums and Tubs
- Kenmore Washer Dryer Combo Elements and Burners
- Kenmore Washer Dryer Combo Filters
- Kenmore Washer Dryer Combo Fuses
- Kenmore Washer Dryer Combo Handles
- Kenmore Washer Dryer Combo Hardware
- Kenmore Washer Dryer Combo Hinges
- Kenmore Washer Dryer Combo Hoses and Tubes
- Kenmore Washer Dryer Combo Knobs
- Kenmore Washer Dryer Combo Latches
- Kenmore Washer Dryer Combo Legs and Feet
- Kenmore Washer Dryer Combo Lights and Bulbs
- Kenmore Washer Dryer Combo Motors
- Kenmore Washer Dryer Combo Panels
- Kenmore Washer Dryer Combo Pulleys
- Kenmore Washer Dryer Combo Seals and Gaskets
- Kenmore Washer Dryer Combo Sensors
- Kenmore Washer Dryer Combo Springs and Shock Absorbers
- Kenmore Washer Dryer Combo Switches
- Kenmore Washer Dryer Combo Thermostats
- Kenmore Washer Dryer Combo Timers
- Kenmore Washer Dryer Combo Transmissions and Clutches
- Kenmore Washer Dryer Combo Valves
- Kenmore Washer Dryer Combo Wheels and Rollers
- Kenmore Washer Dryer Combo Wire Plugs and Connectors