Back
Back
Keep typing for more specific results...

Kenmore Washer Dryer Combo Latches

Popular Kenmore Washer Dryer Combo Latches

Your Price
$6.95
  In Stock
Kenmore Washer Dryer Combo Dryer Door Catch Kit
★★★★★
★★★★★
133 Reviews
PartSelect Number PS334230
Manufacturer Part Number 279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.
Fixes these symptoms
  • Door Pops Open
  • Door won’t close
  • Lid or door won’t close
  • See more...
Installation Instructions
Terri from Saint Augustine, FL
Door Catch part had fallen out,/ was missing
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. Read more...
Your Price
$50.91
  In Stock
Kenmore Washer Dryer Combo Door Catch
★★★★★
★★★★★
30 Reviews
PartSelect Number PS418433
Manufacturer Part Number 131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, which allows the door to stay secure. Before you begin this repair make sure to disconnect the power supply to the dryer. The tools you will need for this installation include a Phillips screwdriver and a small flat blade screwdriver. A pair of pliers may also come in handy. Users ranked this repair as easy, and say that it will take fifteen minutes or less to complete.
Fixes these symptoms
Installation Instructions
Glenda from Covington, LA
hinges had broken over time
easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks. Read more...
Your Price
$67.95
  In Stock
Kenmore Washer Dryer Combo Lid Lock & Switch Assembly
★★★★★
★★★★★
6 Reviews
PartSelect Number PS3496878
Manufacturer Part Number WH44X10288
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a cycle or open your washer door. It is mostly black in color and made of plastic. This part measures approximately 3.75 by 3.5 inches.
Fixes these symptoms
  • Lid or door won’t close
  • Locking Issues
  • Will not drain
  • See more...
Installation Instructions
Randy from CANTON, NC
Washer would not spin or drain
I went to You tube sight to see how I can remove front of washer so I could inspect inside and see if the problem was visible. A butter knife easily released the tabs that hold the front of washer on. My wife in the mean time found a you tube video that showed the same problem and I ordered the part right away. It showed just two screws and a plug that had to be removed. I always buy my parts from part-select because the quality and speedy delivery and tracking is great! This was an easy fix! Read more...
Your Price
$9.95
  In Stock
Kenmore Washer Dryer Combo Dryer Door Catch
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11741434
Manufacturer Part Number WP3389441
This white female door catch is attached to the dryer door.
Fixes these symptoms
Installation Instructions
tony from prineville, OR
Top door catch assembly had broken
It was so easy, that my wife did it the day we got the part before I got home from work. She wedged it out with a flat head screw driver and then pushed the new door catch assembly in with her thumb. Pretty simple, thanks for having parts like this available to the public! Read more...
Your Price
$13.95
  In Stock
Kenmore Washer Dryer Combo Dryer Door Strike
★★★★★
★★★★★
9 Reviews
PartSelect Number PS266893
Manufacturer Part Number WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.
Fixes these symptoms
Installation Instructions
robert from mount joy, PA
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min. Read more...
Your Price
$19.95
  In Stock
Kenmore Washer Dryer Combo Dryer Door Latch
★★★★★
★★★★★
15 Reviews
PartSelect Number PS3502777
Manufacturer Part Number WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on the door strike, and will not stay closed, you may need to replace the door latch. This part is square in shape, and is approximately 3/4-inch in length, by 3/4-inch in width. The part is made of white plastic with a metal tab. To access the door latch, you will need to remove the top and side panels on your dryer. To complete this repair, simply pop the damaged door latch out of position, and snap the new one into place.
Fixes these symptoms
Installation Instructions
robert from mount joy, PA
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min. Read more...
Your Price
$28.95
  In Stock
Kenmore Washer Dryer Combo Door Strike
★★★★★
★★★★★
9 Reviews
PartSelect Number PS455020
Manufacturer Part Number 5303207102
The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair that should only take a few minutes to complete. The package contains one strike. Open the dryer door, and use a flat head screw driver to snap the old strike out if it has not fallen out already. Simply push the gasket out of the way, squeeze together the strike and place inside of the opening. Wiggle to ensure it is set in place properly.
Fixes these symptoms
Installation Instructions
Bruce from Seminole, FL
Door Latch & Door Strike Broken On Dryer
I removed the broken door latch & strike with pliers. Then I pushed the new parts into place Read more...
Your Price
$24.95
  In Stock
Kenmore Washer Dryer Combo Dryer Door Catch Kit
★★★★★
★★★★★
20 Reviews
PartSelect Number PS2162263
Manufacturer Part Number LA-1003
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appliance to both start and complete a full drying cycle. There are two pieces included in this kit, one catch, and one strike. You open and close the door on such a regular basis that this mechanism can wear out. It is a fairly common part to replace. You will need to remove the door of your dryer to install the replacement catch assembly.
Fixes these symptoms
Installation Instructions
Paul from Mt. Pleasant, SC
catch mounted on door broke
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. Read more...
Your Price
$9.95
  In Stock
Kenmore Washer Dryer Combo Washer Lid Strike
★★★★★
★★★★★
8 Reviews
PartSelect Number PS11741871
Manufacturer Part Number WP358684
This part is used to activate the lid switch when the lid opens/closes.
Fixes these symptoms
  • Will not agitate
  • Will not drain
  • Will Not Start
  • See more...
Installation Instructions
Fred from Midlothian, VA
Washing Machine kept cutting off mid-cycle
I had to remove the washing machine from the laundry room (our laundry room is pretty small).

I read the do-it-yourself explanation posted by Paul From Glendale CA and followed his instructions.

1. Unplugged the Washer and disconnected the hoses, so I could slide the washer into the kitchen.

2- Unfastened the two screws in the front lower corners of the controls panel and tilted is back. Unfastened the old lid-switch wiring from the control panel.

3. Remove the clips at the two corners under the control panel. I rotated the cover forward to clear it from the back and lifted it off and set it off to the side.

4. While I had the Washer disassembled I vacuumed out all the accumulation of dust, etc.

5. Removed the lid switch and unfastened the ground wire.

6. Installed the new switch and reassembled the Washer.

7. I did not read Paul's reassembly instructions closely enough. The front flange of the cover goes UNDER the steel frame on the washer. I spent 30 minutes trying to get the cover on, then finally figured that out on my own. Once I got the flange under the frame, it took about five minutes to get the cover on, the clips in and the control panel back into positions and reassembled.

The entire process is not particularly difficult. Had I read the "UNDER the frame" part earlier, the entire repair would have taken no more than 45 minutes.

Having another person to help reinstall the cover would be helpful. The cover is not heavy but it is a little awkward to handle and having another person to help line up the back cover, etc. will make the reassembly even easier.
Read more...
Your Price
$20.95
  In Stock
Kenmore Washer Dryer Combo Striker
PartSelect Number PS16227175
Manufacturer Part Number 137513712
This is an authentic lid strike (white), which works with washer dryer combos.
Installation Instructions
John from SILVER SPRING, MD
The striker that signals that the lid is closed broke
The striker is attached with two Phillips screws. All you do is unscrew the broken one and screw on the new one, and you have saved yourself from an expensive service call. Read more...

Related Kenmore Washer Dryer Combo Parts