All Installation Instructions for General Electric Range 10461-2

Intermittent heat then no heat on oven element

With multimeter checked resistance of oven sensor. Specs called for 1100 ohms. It was off by 27 ohms. The sensor from Part Select had exact wire connection as original. Then just matter of undoing old and reconnecting with new one.

One unsatisfactory event. I asked Part Select why my clock did not work or light up(timer works ok) . Answer was: sorry we have no time to help you. That soured the otherwise happy experience.

Parts Used:

Oven Sensor

Bruce from AKRON, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom trim had rusted out from water build-up

disassembled bottom trim on oven door.cleaned area of excess rust and installed trim piece.

Parts Used:

Range Bottom Trim (White)

john from buford, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My burner trays were worn out and I needed new ones

I simply pulled the old ones out and replaced them with the new ones. It looks so much better and cleanes up well.

Parts Used:

Range Burner Bowl 8

Range Burner Bowl 6

Mary Jane from La Junta, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old burner bowl needed to be replaced

Took out the old & put in the new one-Done!

Parts Used:

Range Burner Bowl 8

bonnie from N KINGSTOWN, RI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

End cap broke on handle

Opened oven door removed screw and broken end cap. Replaced with new end cap and put handle back on

Parts Used:

End Cap - White - Right Side

Jim from NORTH HAVEN, CT
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Change bulb

Easy

Parts Used:

Light Bulb (40W)

Louis from LEAGUE CITY, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Just follow the enclosed instructions

Followed the instructions

Parts Used:

Oven Sensor

HAROLD from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bad sensor

By myself

Parts Used:

Oven Sensor

John from CASPER, WY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Obsolete appliance parts missing

Thank goodness for PartSelect.com
When we moved into our home the microwave and electric range are obsolete appliances and were missing parts. PartSelect.com has pictures of parts on one inch grid pattern so I was able to select the hard to find parts that would fit perfectly and they did.

Parts Used:

Range Burner Bowl 6

Darrell from Cape Coral, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven Door Handle Broke

I removed the 3 screws from the Door Handle End Cap that was broken and replaced it with the (easily ordered and quickly delivered) New End Cap.
The job was quick easy and we barely remember the door handle at all.

Parts Used:

Range Handle End Cap

Timothy from Waterford, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

original drip pans scrubbed so much-rusted....

Took out the original drip pans and set in replacements which I ordered in black enamel.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.

Parts Used:

Range Burner Bowl 8

Range Burner Bowl 6

Jane from Quarryville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven door handle end caps broke

We were really happy with how quickly the parts we ordered were delivered to us. Replacing the endcaps was quick and easy.

Parts Used:

Range Handle End Cap

Danette from Heber City, UT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

4 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace old burner bowls

It was easy to just replace the old burner bowls rather than try to clean them. The peices ordered from Parts Select were a perfect match and they arrived on a timely basis.

Parts Used:

Range Burner Bowl 8

Range Burner Bowl 6