CVE28DP2NCS1 General Electric Refrigerator - Overview
Sections of the CVE28DP2NCS1
[Viewing 14 of 14]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Set Screw
PartSelect #: PS8767906
Manufacturer #: WR01X20424
The GE Set Screw is a critical refrigerator component, designed with meticulous precision to adhere to the strict GE standards. This essential item contributes to the smooth and efficient operation of...
$13.95
In Stock
BYPASS FILTER PLUG
PartSelect #: PS16217315
Manufacturer #: WR17X33825
This bypass filter plug is an authentic OEM replacement part designed for your refrigerator. It is small component that is used in the water filtration system. It creates a direct path for water to fl...
$52.87
In Stock
SMALL CUBE ICEMAKER
PartSelect #: PS16874486
Manufacturer #: WR30X39345
This OEM small cube ice maker assembly fits select refrigerator models and includes the ice mold and control device. It automates the freezing and ejection of ice cubes, refilling with water until the...
$110.53
In Stock
Screw
PartSelect #: PS294660
Manufacturer #: WR1X1850
This screw is sold individually.
$13.95
In Stock
STAINLESS DRIP TRAY COVER
PartSelect #: PS12744026
Manufacturer #: WR17X32472
Introducing the GE Stainless Drip Tray Cover, a high-quality appliance part specifically designed for your GE products. This stainless steel cover is an essential component for maintaining safe and ef...
$36.95
In Stock
FREEZER EVAPORATOR FAN
PartSelect #: PS12744144
Manufacturer #: WR60X32088
Enjoy the peace of mind of a perfectly functioning freezer with this genuine GE Freezer Evaporator Fan. This high-quality appliance part helps in ensuring efficient cooling and consistent air circulat...
$79.33
In Stock
ICE BOX FAN
PartSelect #: PS12744140
Manufacturer #: WR60X31997
Introducing the GE Ice Box Fan, a critical component for maintaining your refrigerator's optimal performance. This assembly keeps your ice room perfectly chilled by continuously circulating cool air, ...
$81.43
In Stock
FREEZER DRAWER GASKET
PartSelect #: PS12749328
Manufacturer #: WR14X32103
Maintain your freezer's optimal functionality with the GE Freezer Drawer Gasket. This high-quality gasket creates a tight seal for your freezer drawer, ensuring cold air stays trapped inside to keep y...
$58.36
In Stock
Questions And Answers for CVE28DP2NCS1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the CVE28DP2NCS1
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Was not making ice
Unpluged refrigerator, Removed 1 screw, removed cover, unplugged 2 wiring harnesses, removed second screw in icemaker lifted up icemaker, put new icemaker in pulled down to catch in hooks.installed screw in icemaker, Reconnect 2 wiring harnesses, put wiring harnesses into cutout installed cover, put screw into cover. Plugged refrigerator
... Read more
back in set up icemaker by morning the bucket was full of ice.
Read less
Parts Used:
-
Gary from Suffolk, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer temperature was warm, but freezer evaporator frozen
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge)
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the ... Read more thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the ... Read more thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
Read less
Parts Used:
-
Generoso from Ocala, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wasn't making ice
-
TIMOTHY from SPRINGVALE, ME
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!