All Installation Instructions for Frigidaire Refrigerator DGHX2655TF6

chrisper drawer jammed found supports were broken

Looked at video on how to remove and reinstall support and followed the instruct ions

Parts Used:

Front Crisper Cover Support

Rear Crisper Support

ROMAN from COLTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

When washing the shelf insert glass piece, it broke into a million pieces.

The repair was just as easy as ordering the part which arrived on day three after I ordered it! I had already cleaned up the broken glass insert, so all I had to do was unpack and lay the new shelf in. Took less than a minute!

Parts Used:

Crisper Glass Insert

Gayle from Hot Springs Village, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cannot get a replacement part to make repair

The repair didn't happen. The bin arrived broken and I have been ignored by whoever takes care of getting me a replacement. I would very much appreciate some communication

Parts Used:

Refrigerator Door Shelf Bin

Tim from BILLINGS, MT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

8 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I drop a Ketchup bottle on the corner of the bin

Glue the old one with gorilla glue. Made space and put the bin in. Now I have an extra one.

Parts Used:

Door Bin (Clear)

Samuel from KILLEEN, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer started icing up. Gasket was torn in places letting air in.

The most difficult task for me was getting old gasket out. I did call for repair help. The service person was most helpful. After almost giving up, one more tug and the gasket started coming out. Next step was cleaning the area. Aligning the gasket correctly made installation easier. I realized right away that I needed to start in a corner. The gasket went in without a hitch. My freezer is like new again. Next installment will be the refrigerator.

Parts Used:

GASKET-FRZR DOOR,GRAY,MAGNETIC

Shellie from MONCKS CORNER, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One of the fridge bins snapped as I used one finger to pull ithe door shut

!st bin that came was broken when it arrived. It was only wrapped in a plastic bag inside the box. The second bin survived although wrapped the same way.....15 seconds to get it snapped in. Do NOT pull the fridge door shut with one finger on the bin!! LOL

Parts Used:

Refrigerator Door Shelf Bin

Tracy from LA CYGNE, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broke the Bin-Door

Replaced said Bin-Door.

Parts Used:

Refrigerator Door Shelf Bin

Joseph from CYPRESS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer door gasket became loose

Followed instructions for this part from this site and things went well.

Parts Used:

GASKET-FRZR DOOR,GRAY,MAGNETIC

Jerome from Detroit, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken door bin

pushed bin into place

Parts Used:

Refrigerator Door Shelf Bin

Nancy from NORTH DIGHTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

WATER FILTER EXPIRED

REPLACED WITH NEW.
HOWEVER, THE WATER FILTER INDICATOR STILL SAYS
'REPLACE'. THERE IS NO LEAKAGE, BUT IT APPEARS LIKE THE NEW CARTRIDGE IS NOT COMPLETELY INSERTED. I'VE TRIED REMOVING AND REPLACING THE NEW CARTRIDGE SEVERAL TIMES, BUT IT STILL SAYS 'REPLACE'.
INCIDENTALLY, THIS WAS THE SECOND ORDER OF THE CARTRIDGE AND LAST TIME I GOT TWO, AND THEY BOTH FIT FINE! WITH THIS ORDER I GOT JUST ONE.

Parts Used:

Refrigerator Water Filter

Bo from SUN CITY WEST, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins

9 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

none

slid the shelf in place

Parts Used:

Refrigerator Door Shelf Bin

John from SOCIAL CIRCLE, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

2 drawer undercounter beverage ref not getting cold enough. Wont get below 48°

Took drawers out by removing 2 screws on top of rail near front, then popped black plastic cover off in lower right inside cabinet...sensor just un plugged and new one plugged in easily...did not fix problem though...display set at 34 but bottom drawer reads about 40 at best and upper drawer reads around 55...dont think the 3 little fans inside on back wall have been running

Parts Used: