All Installation Instructions for General Electric Dryer GCMX180ED4WW

unable to select anything on the wash cycle selector

the original knob had cracked and I ordered a new one and replaced it, all is well, thank you

Parts Used:

Dryer Knob

Rodney from BATESVILLE, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Knob broke and ordered a new one

Very easy fix since it was only the knob

Parts Used:

Dryer Knob

Christine from ALLEN PARK, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

knobs cracked

Push on. But one pushed in panel

Parts Used:

Knob & Clip

Dorothy from LACYGNE, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bulb was intermittently working

Inspected door switch operation and was working properly and simply looked for bulb in the dryer drum housing and located it immediately above the door opening,unscrewed it and noticed the broken elements inside. The bulb is a 10w/120V. Installed bulb problem solved.

Parts Used:

Dryer Light Bulb

Peter from LEOMINSTER, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Knob broke

Very simple. Ordered the part. Received correct part and fit perfectly.

Parts Used:

Dryer Knob

CAROLINE from SAN ANTONIO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The timer knob was inoperable

Very simple: I looked up the part number for my timer knob, ordered it from this site and received it one day earlier than expected. I simply attached the knob, and my problem was over. I am very, very satisfied and happy with your immediate delivery of the ordered part.

Parts Used:

Dryer Knob

Christel from GREENACRES, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace knob

No brainer

Parts Used:

Dryer Knob

Dave from DOUGLAS, WY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The old dryer knob broke

I took off the old dryer knob and put on the new one

Parts Used:

Dryer Knob

Charlie from KILGORE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bulb burned out

Unscrewed the old bulb using the lefty loosey method. Installed the new bulb by turning it clockwise or righty tighty.

Parts Used:

Dryer Light Bulb

Pete from CEDAR RAPIDS, IA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken knob

Put the knob on and turned.

Parts Used:

Dryer Knob

Cheryl from LIMA, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

knob broke

Just pushed on new one

Parts Used:

Dryer Knob

Jim from CRAWFORDVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Timer in Timed Dry cycle stopped at 50 minutes.

Unplugged dryer from wall.Removed 3 screws from the back that held the front face plate on. Pulled face plate away and to the right to release it from the dryer. Lifted the locking tab slightly and turned the old timer counter clockwise to remove. One at a time I removed a wire and connected it to the new timer. Installed new timer to the back of the face plate. Pushed on timer knob so I could hold the back of the timer to get it all the way on to the shaft. Lined up the three tabs at the bottom of the face place and slid it to the left , pushed the face face into place and secured it with the 3 screws. Plug Dryer back in. Done in less than 10 minutes. Dryer now works properly again. I know I saved myself a lot of money doing the repair my self.

Parts Used: