Models > XR-20

XR-20 Weed Eater Trimmer - Overview

Sections of the XR-20

[Viewing 4 of 4]
Page A Diagram and Parts List for Weed Eater Trimmer
Page A
Page B Diagram and Parts List for Weed Eater Trimmer
Page B
Page C Diagram and Parts List for Weed Eater Trimmer
Page C
Page D Diagram and Parts List for Weed Eater Trimmer
Page D
Keep searches simple, eg. "belt" or "pump".
Fuel Line – Part Number: 530069247
Fuel Line
★★★★★
★★★★★
(4)
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.62
  In Stock
Engine Fuel Filter – Part Number: 530095646
Engine Fuel Filter
★★★★★
★★★★★
(2)
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel...
$4.99
  In Stock
Tank Purge Line – Part Number: 530069216
Tank Purge Line
★★★★★
★★★★★
(2)
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$6.21
  In Stock
Fuel Cap (w/ retainer) – Part Number: 530014347
Fuel Cap (w/ retainer)
★★★★★
★★★★★
(1)
PartSelect #: PS9468748
Manufacturer #: 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic...
$8.71
  In Stock
Carb Gasket/Diaphragm – Part Number: 530069844
Carb Gasket/Diaphragm
★★★★★
★★★★★
(1)
PartSelect #: PS9472427
Manufacturer #: 530069844
Note: The beige piece pictured has been redesigned. It no longer has the four corner holes. It now only has 2 corner holes at a diagonal.
$18.68
  On Order
Rope (3 ft.) – Part Number: 530069232
Rope (3 ft.)
PartSelect #: PS9472269
Manufacturer #: 530069232
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installat...
$7.46
  In Stock
Screw – Part Number: 530015814
Screw
PartSelect #: PS9469128
Manufacturer #: 530015814
$6.21
  In Stock
Valve-Check (Duckbill) – Part Number: 530026119
Valve-Check (Duckbill)
PartSelect #: PS9002985
Manufacturer #: 530026119
This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and desig...
$3.99
  In Stock
Diaphragm-Metering – Part Number: 503896701
Diaphragm-Metering
PartSelect #: PS11811115
Manufacturer #: 503896701
$8.71
  In Stock
Flywheel Washer – Part Number: 530015127
Flywheel Washer
PartSelect #: PS9468845
Manufacturer #: 530015127
$6.21
  In Stock
Diaphragm-Fuel Pump – Part Number: 504130807
Diaphragm-Fuel Pump
PartSelect #: PS11811118
Manufacturer #: 504130807
This fuel pump diaphragm, also called a membrane or a gasket, is what helps pump fuel from the tank to the engine of your gas-powered lawn equipment. It is normally found attached to the carburetor as...
$6.21
  On Order
Return Line – Part Number: 530069571
Return Line
PartSelect #: PS9970287
Manufacturer #: 530069571
  No Longer Available
View More
Back to Top

Questions And Answers for XR-20

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the XR-20

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
Fixing Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fall into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Read less
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Victor from SCOTTSVILLE, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
36 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel and Purge lines had disintegrated
Disassembled it and cleaned fuel tank. Cut and ran new fuel lines, installed filter and reassembled. Parts fit perfectly and got running after not running for over 20 years.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Casper from ERATH, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
22 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top