YKHMS2050SB1 KitchenAid Microwave - Instructions

donald from payson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Bulb Finally went out

Used an apex bit unscrewed the fittingand down came the light cover. Pulled the old bulb out and had to use a flashlight to line the prongs up to install the new one. Whileeverything was down used an oven cleaner to degrease and clean EVERYTHING. You wouldn't beleive how much grease and debris will accumulate in 5 years. And I only fry bacon once in a blue moon. All in all it was simple to order, clean, and repair.

Parts Used:

Microwave Air Filter

Jeff from Hanahan, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Light burned

Unscrewed the lens cover anbd inserted the new bulb. Put the cover back on and there was light!

Parts Used:

Jennifer from Red Oak, IA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

burned out overhead light

Some difficulty getting screw loosened, once that was done replaced burned out bulb.

Parts Used:

Sharon from Anoka, MN
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Replace charcoal filter

Took old one out,and clipped new one in.

Parts Used:

Louise from Mason, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

surface light on microwave wasnt' working

took the light assembly off and replaced the bulb and put the assembly together and fitted back in the space and finished the assembly.

Parts Used:

Dotty from Hillsboro, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

turntable broke, spring was missing, filters needed changing

it was a breeze, the parts arrived in great condition and all was self explanatory, No directions or tools needed - filters replaced, turntable placed back in microwave and spring replaced.

Parts Used:

SPRING

Kristi from Richmond, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Turntable Driver was down to two legs . . . one had melted into a blob!

I removed the injured turntable driver . . . had lost one of its three legs due to some sort of uber-thermal meltdown! As a result, the microwave turntable was turning a bit, stopping, turning a bit more, stopping . . . I was concerned I wouldn't be able to find such a tiny little part, but voila . . . PartSelect had what I needed. Other than the cost (it's just a tiny piece of plastic!) and s/h . . . I'm happy to have a fully functional microwave back! I simply popped the new turntable driver into place and replaced the glass turntable and plastic ring.

Parts Used:

Marcia from Eugene, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

glass plate broken, turntable driver melter

replaced the above and t. ring, spacer and motor. from underneath the microwave, two screws lets motore drop down, then detach two wires from terminals on moter (be sure to unplug the microwave first) and from insdie the microwave the driver pulls up off the motor shaft easily.

Parts Used:

Turn Motor

Turntable Ring

Mike from Mukilteo, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

I broke the glass turn table tray in my microwave

There was no installation involved. I just placed the new tray in my microwave. What is amazing however, is I ordered my part early one morning, the tray arrived at my door step the next day.I paid for regular shipping. Thanks guys good work

Parts Used:

JoEllen from Salinas, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Broken glass turntable

The glass turntable from PartSelect.com arrived quickly, on the estimated arrival day, and we were back in business. Thanks

Parts Used:

Mike from Candler, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

turntable was making noise

We took out 10 screws on bottom of microwave. Removed turntable motor. Determined motor was bad by turning and listening while it was turned by hand. Bought motor online. 2 days later motor arrived and we installed it...EASY BREEZE Microwave works GREAT....

Parts Used:

Turn Motor

Patsy from Gloucester, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Noisy turntable motor

Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure very easy.

Parts Used:

Turn Motor

Bruce from Rock Island, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Turntable did not revolve

Installed new turntable driver. Very easy to repair

Parts Used:

Thomas from Venice, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

My girlfriend's microwave did not spin anything and didn't cook very well

I opened the door, inserted the part, and automatically became her hero! She even began to sing Bette Midler's Wind Beneath My Wings: "Did you ever know that you're my hero..."

Parts Used: