This part is the upper spray arm for your dishwasher. The spray arm is made of plastic and is approximately 10 inches wide. The upper spray arm is mounted to the top of the dishwasher tub, and rotates during the cycle to ensure that your dishes are washed evenly. If your spray arm is clogged or damaged, your dishes may not clean evenly, and you will need to replace the spray arm. To access the spray arm, you will need to remove the top dish rack, then simply unscrew the old arm. Screw the replacement arm in, replace the dish rack and your repair is complete.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
Part# WD35X20794 replaces these:
AP5989052, WD22X10088
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.9
Filter By Rating:
5 Stars
11
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nicolas D - June 10, 2023
Verified Purchase
Dishwasher
The part was perfect fit
★★★★★
★★★★★
HENRY R - March 11, 2023
Verified Purchase
Part worked perfectly
Part worked perfectly.
★★★★★
★★★★★
Steve W - November 3, 2022
Verified Purchase
Dishwasher upper spray arm
Perfect fit. Fast shipping
★★★★★
★★★★★
Dale C - October 8, 2020
Verified Purchase
Easy repair
The part was just as ordered and was delivered quickly. Easy to install and worked well.
★★★★★
★★★★★
Mike A - September 10, 2019
Verified Purchase
Perfect fit
Works like a charm. Packaged well, arrived quickly.
★★★★★
★★★★★
Barbara P - January 5, 2019
Verified Purchase
A very easiy repair.
The part came quickly and my dishwasher is in service again.
★★★★★
★★★★★
Deblyn C - November 27, 2018
Verified Purchase
Great fit
Part took a week or so, but fit perfectly
★★★★★
★★★★★
CHONG P - September 26, 2018
Verified Purchase
Easy repair. Working well
The part fits well and is working well.
★★★★★
★★★★★
Gary M - August 14, 2018
Verified Purchase
Easy and simple
The part was a perfect match it took only seconds to install and is working great ever since thank you
★★★★★
★★★★★
Trish B - March 22, 2018
Verified Purchase
Easy to install and working great
Upper spray arm for GE profile dishwasher working great and installed in less than 5 minutes.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace all three spray arms and knocking sound disappeared. Unscrewed counter clockwise old sprayer arms and lifted. Replaced with new sprayer arms and noise disappeared.
The part did not fit at all but not worth it to me to return it. The part I need is about 20 inches in length and the one sent was about 10 inches. I will simply call for this dishwasher to be repaired or replaced.
Marlene from FT WASHINGTON, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm broke off and melted on heating element
Popped old bracket off with screwdriver, with a then easy installation of the new part.
Kristin from CONROE, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Spray Arm broke in half from hitting something in the upper rack.
Had to remove the rubber gasket on the new spray arm to install the device, as it was hard to push into the above slot that fits the arm..
Howard from PORT TOWNSEND, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper arm had disconnected, and had fallen onto heating element at bottom of unit and melted.
The part simply snapped in and worked perfectly.
Mary from EASTON, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
December 19, 2018
The upper arm sprayer is damaged does a screw come with the arm?
For model number GDF510PSD6SS
Hello Barbara, thank you for your question. No, this part doesn't require a screw to install. To access the spray arm, you will need to remove the top dish rack, then simply unscrew the old arm. Screw the replacement arm in, replace the dish rack and your repair is complete. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Morris
October 3, 2017
Part 570 (upper sprayer) and the arm that holds it came off. It is still intact. It appears I could re-attach it.Can you provide instructions how to do this with pictures or diagrams. I could send a picture of the part.
For model number GDF520PSD0SS
Hi Morris, Thank you for the question. If you remove the upper spray arm from the tubing(conduit) that it connects to you will see a screw that holds the conduit to the top of the dishwasher, then you just snap the spray arm back onto the conduit tube. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy Mcloud
January 6, 2018
Wash arm fell offwas laying on dishes in perfect condition how do i attach it back and where does it go
For model number GDF520PGDOWW
Hello Nancy, Thank you for your inquiry. The upper spray arm attaches to the main conduit assembly that is behind the racks. If you look at the top of the conduit tube, you will see a screw that holds the conduit to the top of the dishwasher, then you just snap the spray arm back onto the conduit tube. If it does not stay, you may need to replace it. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
KEN
February 17, 2018
Upper arm water spray detached from back wall of dishwasher. Will not reattache. Nothing seems to be broken.
For model number gdf520pgd2bb
Hello Ken, Thank you for your inquiry. The upper spray arm attaches to the upper conduit-WD12X10414 with two square support clips on the arm that attach to the two side tabs on the upper conduit arm. If it is not re-attaching, check to see if both square support clips on either side of the arm are not cracked or broken, and check the conduit to see if the tabs are broken off. Hope this helps!
Was this helpful?
Thank you for voting!
Susan
July 8, 2019
Water dispenser arm has fallen off under side of upper tray. Have a knob and flat metal disk but nothing to attach the arm. A long screw to attach it, could it fall down into bottom through drain? Can i fix it?? determination at a high level! lol! is there a scematic somewhere to use? please advise! thank you.
Hello Susan, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
