The pantry end cap is also known as a drawer support or a door shelf trim. This specific piece is sold individually and is meant for the left side of your refrigerator. It snaps into place on the door of your fridge, which allows it to hold items on the door shelf. To change the left side end cap on your refrigerator you will need a 1/4 inch nut driver. Users have ranked this installation as easy to do, with a less than thirty minute repair time.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Refrigerator Pantry End Cap - Left Side
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kerry W - August 5, 2023
Verified Purchase
So easy to repair.
Exactly as described and fit perfectly. Such an easy repair.
★★★★★
★★★★★
William J - June 11, 2023
Verified Purchase
Complete Success
My wife wanted the broken refrigerator bottom drawer door fixed. I thought it was going to be too difficult to do. But she insisted I order the parts. I did. Not only did PartSelect send the two parts quickly, they also sent a video on how to install them. It was perfect - I don't think I could have done it without the video. Complete success. I was a hero. At least for a couple days.
★★★★★
★★★★★
Leslie B - November 18, 2022
Verified Purchase
Perfect part for our aging fridge- and fast shopping!
Great to be able to get a part for our 20+ year old refrigerator, thank you!
★★★★★
★★★★★
Armin H - November 5, 2022
Verified Purchase
Genuine Part
Genuine part that fit perfectly.
★★★★★
★★★★★
Mark V - August 27, 2022
Verified Purchase
Original Part, easy repair
I actually bought both the Left and Right Pantry End Caps - the pins that hold the door had broken off during the 18 years we've owned the refrigerator. When the second one broke I thought we'd have to do without the door - but a quick search found both parts in stock. Easy 10 minute replacement of both sides - right is a little more time consuming than the left. Fast shipping had the parts here and installed quickly.
★★★★★
★★★★★
Bryan P - August 2, 2022
Verified Purchase
Perfect fot
Fast shipping and the part matched the original.
★★★★★
★★★★★
Wendy M - April 14, 2022
Verified Purchase
Great service!
My purchase was easy and fast delivery! Even included a video, very helpful!
★★★★★
★★★★★
JOSEPH L - April 4, 2022
Verified Purchase
Satisfied
Satisfied: The part was 99% identical to the original part , (missing a stop portion for holding a bracket , but that didn't prevent it from working ) . The installation was easy and the refrigerator draw in back to functioning as it should .
★★★★★
★★★★★
Calvin V - February 28, 2022
Verified Purchase
Great
Exactly what I needed
★★★★★
★★★★★
James W - February 26, 2022
Verified Purchase
Thank you
Quick delivery and repair is done!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 44 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Repaired two issues: plastic hinge tab for pantry lid on left pantry end cap and door gasket on right door had to be replaced
The videos provided by PartSelect for both repairs were excellent. Repairs went exactly as per videos. Door gasket arrived with deformations do to folding in storage and shipping. Used hair dryer to remove puckers as instructed in Video. This is a must before installing gasket.
broken hinge pin for deli drawer cover - replace end cap
First, turn off the refrigerator so the open door alarm doesn't drive you crazy while you are working with the refrigerator doors open! Then, remove both crisper drawers, remove deli drawer, remove deli cover from two pins (one was already broken), remove the bottom glass shelf and the plastic glass support. None of this requires any to
... Read moreols, all just slide or lift out. Then, using a nut driver remove the two screws holding the drawer slide from the pantry end cap. You access one of the screws from an opening while the slide is all the way in. This is where I needed needle nose pliers to remove the screw from the opening after it was unscrewed - if your nut driver is magnetic you won't need the pliers. To access the second screw, pull the slide all of the way out. Then you remove the broken end cap by unscrewing 3 screws with the nut driver. Once the screws are removed, you lift up on the front of the end cap to loosen it from a catch on the inside and then pull the end cap out. Install the new end cap by sliding the two tabs into the back of the refrigerator and then pushing down on the end cap to set it in the catch. Now replace the screws, re-attach the slide with the two screws, reinstall the glass and the drawers and then reinstall the drawer cover by slipping it into the pins on each side (be careful when depressing the pins, do it gently or they may break off). Turn the refrigerator back on. You are done These instructions make it sound much more difficult than it actually is, it takes as long to remove and replace the drawers and it does to do the actual installation of the end cap..
Read less
Tom from OCEANSIDE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clip on left hand side that holds Pantry cover broke.
1. Removed both crisper drawers. 2. Removed glass 3. Philips head screwdriver to remove the 2 screws securing guide rail. 4. 1/4" nut driver to remove the 3 screws holding the End Cap than removed and replaced with new one. Done.
Vincent from Whitestone, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke off the piece that holds the door on the pull out "cheese drawer" by accident
First of all the part came in less than 24 hours, amazing. It was very simple to repair and everything is as good as new. Thanks so much for being such a great company to work with. I have ordered other replacement parts before from you and will continue to use your company.
Heather from Columbus, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke the tab with the pin which held the pop-up cover onto the bottom drawer
I removed the drawer, the two drawers above it and the glass plate. I removed the left end cap, unscrewed the metal runner from it and put it onto the new end cap. I installed the new end cap into the refrigerator and replaced the various drawers and covers. The pop-up was a little tight, so I removed the drawers again and loosened the
... Read more screws to center the drawer, replaced everything and voila! a perfectly working pop-up without having to wait for a repairman or pay the very high repair fees. The part was shipped and arrived within two days - Great service. Thanks
Read less
Dvora from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom Drawer pin was broken
Replaced the left side endcap for the drawer. Three screws and it popped out. Easy process once I actually looked at it. Drawer cover now works as designed. Replaced inline water filter. Not problem there.
Repair was simple and just as described by several others on this site! From finding the part, ordering, quick shipping and instructions, PartsSelect made this job a breeze to complete.
The repair required that I removed two drawers and a glass panel; removal of three screws completed the disassembly process. The ordered part was delivered without delay, which made the repair almost a pleasure.
Dwight from Clovis, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cover to pullout drawer hinge broken
Required removal of the entire endcap piece. A total of 5 screws. Hardest part was realizing i didn't have the right size socket wrench to start. Got that and replaced all 5 screws in under 5 minutes. $18 for part, $10 for tool.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sherry
November 12, 2017
Wp12656105 is left side end cap, what is part number for right side? I need to order both sides
Hi Sherry, Thank you for the question. The right side is PartSelect Number PS11738568. Good luck with the repair!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
August 3, 2017
What is the length of this piece?
Hello Lisa, that is a great question. That piece is 20 inches long. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
February 15, 2018
Will these fit a jenn air jfc2087hrp?
For model number Jenn Air JFC2087HRP
Hi Pat,
Thank you for your question. Yes, this pantry end cap is listed under your model number and it is designed to work with your appliance. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 1, 2019
I need to replace the left hand pantry end cap, but my model is kitchen aid kbfs25ewms2. Do you have the same part for my refrigerator? Whirlpool and kitchen aid might use same parts? From the video, my refrigerator looks identical.Thank you.
For model number Kitchen Aid KBFS25EWMS2
Hi David,
Thank you for your question. The end caps for your refrigerator are sold in kit with the left and right side. The part number listed under your model number for the kit is PS11738134. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Beris
May 9, 2019
I only need the cover for cool select pantry drawer.
For model number MF12269VEM10
Hi Beris,thank you for your question. I have linked that part below for you. Good luck with your repair.
Does part Whirlpool # 12656105 fit my model 596 7201 3017? Thank you.
For model number 596-7201-3017
Hello Sabine, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
February 14, 2022
Will this part work with my fridge?
For model number Dacor model number EF36BNDFSS
Hello Scott, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jo Ann
March 29, 2019
Does this part fit my Jet air counter space refrigerator?
For model number JBR2088HES
Hello Jo Ann, Thank you for contacting us. I have researched the model you have provided and can confirm the Part Number: PS11738573 is correct for your appliance. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jen
July 28, 2021
Does this part fit in my model fridge?
For model number KFIS20XVMS2
Hello Jen, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738573 for the Left Side and PartSelect Number PS11738568 for the Right Side. We hope this helps!
My jennair uses Whirlpool wpw10122078 endcap which is identically shaped but has no screws its all snap in it appears. How do i remove the existing endcap (the hinge for the door is broken) there are no screws but it seems to be wedged in pretty tight.
For model number JFC2290VEM4
Hi Daniel, thank you for your question. The endcap does not snap it. It would have screws that attach it to your fridge wall. We have a video on how to replace the part here: https://youtu.be/wvqM2MrCNyo. Good luck with your repair.
