This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plastic. This lid hinge pin is just over an inch long, is sold individually, and does not include the mounting screw (consider ordering mounting screw if it rusted or stripped). It is recommended to check the opposite lid hinge pin before ordering because hinges may wear at the same rate. Be sure to not tighten the mounting screw to pin too tightly to avoid breaking the new part.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Norge Washer Lid Hinge Pin
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Will Not Start
This part works with the following products:
Washer.
Part# WP35-2045 replaces these:
AP6008641, 35-2045
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.7
Filter By Rating:
5 Stars
8
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alan S - July 15, 2023
Verified Purchase
Easy to install, worked perfectly.
It only took about 30 minutes to have my machine up and running.
★★★★★
★★★★★
Carole K - November 28, 2021
Verified Purchase
Exactly what I needed...easy installation for my husband
I was glad to get the parts but very very disappointed in the delivery time...15 days to get a package ca 275 miles...I could have walked there and maybe back in 15 days.
★★★★★
★★★★★
Von B - April 29, 2020
Verified Purchase
OE Parts
Part worked perfectly on my washer lid.
★★★★★
★★★★★
Brian W - July 30, 2019
Verified Purchase
Easy Repair
Fast shipping , a little pricey for a piece of plastic
★★★★★
★★★★★
David T - July 3, 2019
Verified Purchase
Easy repair
Part fit and installation was simple.
★★★★★
★★★★★
Frances H - June 5, 2019
Verified Purchase
Easy repair. The proper parts were sent to me.
I had purchased the part and when it arrived I showed it to my husband. He looked at it and said how am I going to install it. We better wait until one of the son's come over. I told him about the video that instructed a person how to install the hinges. He watched it and did it.
Satisfied customer.
★★★★★
★★★★★
LARRY M - March 12, 2019
Verified Purchase
Easy Repair
Part worked great
★★★★★
★★★★★
Thomas K - January 22, 2019
Verified Purchase
Just what I needed, but too expensive
I liked the fact that I could get a replacement hinge pin for my washing machine but the part was over $10 for a small piece of plastic and the shipping was close to $8 for something that weighed less than an ounce. I also had to reduce the diameter of the pin by using a little sandpaper as the new pin was slightly bigger therefore making it stiff to operate and I didn't want to stress it every time I opened the lid. It cost me close to $20, I figured cheaper than a repair man but had a hard time finding value in the overall cost as compared to what you actually got. I did like the video tutorial on how to replace the part, very helpful and was a snap to install.
★★★★★
★★★★★
Alma F - July 27, 2018
Verified Purchase
Simple repair
I just appreciate that a video is included with the e-mail about how to install the part. ordering was easy and shipping was great.
★★★★★
★★★★★
Gerald E - April 23, 2018
Verified Purchase
Lid hinge pin replacement.
Was necessary to sand down and smooth the pin as it was too large to fit in the other half of the original hinge assembly. As far as remove and replace no problem. If not too handy suggest getting both parts of hinge.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 42 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
lid hinge pin broke
I followed your video instructions. Very good video.
I used the putty knife to release the spring clips on the machine lid. They are about 3" in from the side of the machine. Then I lifted the top of the washer up holding the lid in place. I then used a screw driver (torx) to remove the hinge from the bottom of the washer top. The lid should come right off. Then I the removed the broken hin
... Read morege pins from the back of the lid with a screwdriver and replaced with the new parts. There is a little tab that the pin fits in the lid to assure you have the pin installed correctly. Then I slid the hinge back on the pin and reversed the process reinstalling the hinges and closing the top of the machine over the spring clips and your done. Very easy repair that I completed in less than 15 minutes.
Read less
Robert from LIVINGSTON, MT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lid hinge pins
I raised the top of the washing machine per video instructions, removed the screws, replaced broken hinges with the new ones. It was simple as that.
William from LEXINGTON, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid Hinge Pin had broken
I replaced both the pin and the hinge. The old screws did not fit these parts nor did either of the parts fit the other part although they were almost identical. Screws should be included with the parts as these are supposed to be replacements. Do not try to order only a pin or a hinge without the other. Delivery was very quick.
I watched the video first. It was correct except for the tool was not a phillips screwdriver, but a torx drive. Rounding up the tools took the longest. Everything else was just like in the video.
James from Rio Rancho, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lid hinge pin
It took two of us to move aqnd hold the tub so we could install the hinge. I would not say it was easy to accomplish this.
I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.
easily found correct parts at good price on parts select, ordered. Received the next day and repairs went smoothly, about 20 min and we were good as new.Saved us a repairman visit. thanks.
I found the parts that needed replaced on the Parts Select web sight.I clicked on see install video icon for replacement of the parts that needed replaced and that made the repair real easy.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
August 25, 2017
Hinge pin and hinge do they come as single or pair per order?
For model number Crowley cw5500
Hi Tim,
Thank you for your inquiry. The lid hinge pin and the lid hinge are sold separately. The part number for the lid hinge is PS11741780. I hope this helps. Thank you and have a great day!
Does this hinge pin come in a pair one left and one right
Hi Saul,
Thank you for your question. These parts are sold individually. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Skip
January 27, 2023
Washer will fill and spin but will not advance. Will not agitate even when dial is moved to agitate. Stops spinning when door is raised so I'm guessing switch is ok. Help please.
For model number W205k
Hi Skip,
Thank you for your question. If your washer will not agitate, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator, the lid switch, the water level switch, the motor, the belt and the transmission. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
