Part Location Diagram of WP7733P410-60 Whirlpool Burner Knob - Stainless Color
See part 12 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Burner Knob - Stainless Color WP7733P410-60

★★★★★
★★★★★
17 Reviews

Rated by 25 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 31.45
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11744702
Manufacturer Part Number WP7733P410-60
Manufactured by Whirlpool for Jenn-Air, KitchenAid
Product Description

Burner Knob - Stainless Color Specifications

This stainless burner knob is used in ranges and ovens. The knob allows you to adjust the heat of the surface burner on your range. This knob accepts a D-shaped shaft. If your touchpad does not respond, the knob does not rotate, gets stuck, or the gas igniter glows but does not light, changing out this part can solve your problem. No tools are needed for this easy replacement. Make sure to unplug your range from the power source before installing. Refer to the manual provided by the manufacturer for further guidance.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light | Touchpad does not respond
This part works with the following products:
Cooktop.
Part# WP7733P410-60 replaces these:
AP6011505, 74007733, 7733P410-60, WP7733P410-60VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.6
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 25 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
The knob does not go down; it sticks up too high. Question? Maybe knob is not for position 2. Does it matter which place you put it on?
I tried to put knob on number 2 location. Looks like I need number 1 knob.
  • Joanne from BRANCHBURG, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs for the cooktop burners did not fit so I have returned them and still do not have use of all burners due to lack of knobs
Could not put a square peg into a round hole....parts did not fit and I do not know how to find the model number but the knob has two flat sides.l....the knobs you sent did not.
  • Pat from MCKINNEY, TX
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitors with VERY weak sparks (2 Burners)
Should have read the partselect instructions first 1.) unplugged range 2.) unscrewed (torque screws - good thing I had some) burners - one screw was corroded into the top and snapped - will require a drill to remove and replace metal screw. 3) slid electrical wire from contact 4.) unscrewed (with phillips) Burner Electrode assembly (also corroded - took some force) replaced electrode assy and reversed steps. Works perfect.
Other Parts Used:
Burner Electrode Burner Knob - Stainless Color
  • Thomas from Potomac, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shafts on burner knobs had split.
I thought I had ordered metal knobs but it appears that I got plastic ones. I’m thinking they’ll be fine, the others had just split the shaft that sits on the control stem, but I’m hoping this won’t happen again. I do have a repair question regarding one of the sealed burners on my Jenn-Air. The igniter switch sounds like it’s working but the burner won’t light without putting a match to it. Do you have any ideas of what could be wrong?
Thanks for your help,
Carol Lance
  • Carol from Riverside, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
electrode clicked but failed to light burner
I first tried to remove the torx screws only to have them break off..soooo as with most home repairs it grew into a bigger task. 1) unhooked the gas line and unplugged the unit 2) place the unit upside down on workbench 3) used a socket set to remove the hex screws that held the top on 4)removed all the other burners and disconnected electrical wire connected to the igniters. 5) Removed the top 6) uses pliers to remove the screw parts left in the burner base (wd-40 and lock wrench)..Replaced the old gaskets 7) put the top back on and screwed the top back on (make sure you pull the igniter wires through the top before securing it) 8) Reseat and screw in the burners using a torx bit
Other Parts Used:
GASKET- FI X-Large Burner Head with Electrode Burner Knob - Stainless Color Torx Screw
  • bill from spokane valley, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Being dumb enough to buy Jenn-Air appliances
I removed the old knob and replaced with a new one from the plastic package. Biggest challenge: opening the new plastic package. It if very nice to know you have many of the parts I will need over the next 20 years.
  • Brian from Rancho Mirage, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken control knob for cooktop
found the picture of the piece I needed on your website, ordered it and have it almost immediately. very pleased with the service.
  • Susan from Grand Junction, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
448 of 529 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner knob was broken
I removed the old knob and inserted the new one, which matched exactly. Cooktop is now like new!
  • Kit from Temple, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
145 of 286 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
retainer spring inside knob was lost from cleaning.
Just pulled off the old knob and pushed on the new knob.
  • FRED from CLARKSBURG, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
146 of 349 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old burner knobs had cracks
Removed the old burner knobs by hand, and replaced them with four new knobs.....

Real Easy!!
  • Melvin from San Marcos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lyne
July 20, 2017
Looking for this replacement part but in metal? The plastic version melts
PartSelect logo
Hi Lyne, unfortunately the manufacturer only makes this WP7733P410-60 knob in plastic, and does not have an all metal design. Please let us know if you have any further questions!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Daniel
October 28, 2017
The description says: This stainless burner knob is used in ranges and ovens. My question is it really make out of stainless steel? Or is it plastic like the 74007733 part.
For model number WP7733P410-60
PartSelect logo
Hi Daniel, Thank you for your inquiry. the knobs would be made of plastic and painted a stainless steel color. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Marcus
July 20, 2017
I ordered this part and it came with the plastic sleeve inside the knob but my stove does not need it…. Can I remove it without messing up the knob
PartSelect logo
Hello Marcus, you can remove the plastic sleeve inside the knob, but we recommend using very little pressure when removing it. Both replacement parts are quite delicate and require you to be careful so the knob is not damaged in the processes. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lill
July 20, 2017
So you mentioned no tools are needed for this repair but how do you get the knoby thing off. I tried pulling them and they will not move. I also tried snapping them off with a screwdriver but couldn’t do it. I’m scared to go underneath and break or scratch something, whats the best method to get the thing off!
PartSelect logo
Hi Lill, great question! This knob is meant to come off with no tools. We recommend grabbing the knob with a firm grip and giving it a strong pull. The should come straight off the shaft without needing to pry them off. Best of luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
March 29, 2018
I’m looking for replacement knobs. Is this part for one knob?
For model number JGC8536ADB
PartSelect logo
Hi Karen, Thank you for your question. These knobs are sold individually. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Meredith
January 3, 2019
I’m ordering these knobs for our downdraft range. I also want to order the knob for the downdraft but i do not know the code for that. Please advise
PartSelect logo
Hello Meredith, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Gail
January 30, 2019
I found part ps11744702 which resembles the knob on my Jenn-Air stove. My question is how wide is this knob? I previously ordered from your company a knob that was not wide enough to cover the hole in the knob's surface on the stove.Thanks for your help on this. gail
For model number JGD8430AD814
PartSelect logo
Hello Gail, Thank you for the question. This knob measures about 2 inches in diameter. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Gerry
February 12, 2019
Hi. I broke the smaller knob that is for the fan. I have ordered a few for the burners in the past. Do you have a smaller version for the exhaust fan?Thanks, gerry harris 614 638 5859
For model number PS2375871
PartSelect logo
Hello Gerry, Thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Duane
March 13, 2019
Looking at #12. Stove top knobs. Is that cost for all 5 pcs
PartSelect logo
Hello Duane, Thank you for the question. the knobs are sold individually. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Susan
April 15, 2019
Are these knobs sold as a set
PartSelect logo
Hello Susan, thank you for writing. These knobs are sold individually. I hope this helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744702
Manufacturer Part Number: WP7733P410-60
Brand
Model Number
Description
Jenn-Air
JGC8430BDB
Cooktop
Jenn-Air
JGC8430BDS
Cooktop
Jenn-Air
JGC8430BDW
Cooktop
Jenn-Air
JGC8536ADB
Cooktop
Jenn-Air
JGC8536ADQ
Cooktop
Jenn-Air
JGC8536ADS
Cooktop
Jenn-Air
JGC8536ADW
Cooktop
Jenn-Air
JGC9430ADB
Cooktop
Jenn-Air
JGC9430ADF
Cooktop
Jenn-Air
JGC9430ADS
Cooktop
Jenn-Air
JGC9536ADB
Cooktop - Gas
Jenn-Air
JGC9536ADF
Cooktop - Gas
Jenn-Air
JGC9536ADS
Cooktop - Gas
Jenn-Air
JGC9536BDB
Cooktop - Gas
Jenn-Air
JGC9536BDF
Cooktop - Gas
Jenn-Air
JGC9536BDR
Cooktop - Gas
Jenn-Air
JGC9536BDS
Cooktop - Gas
Jenn-Air
JGD8430ADB
Cooktop
Jenn-Air
JGD8430ADB14
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8430ADF
Cooktop
Jenn-Air
JGD8430ADF15
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8430ADN15
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8430ADS
Cooktop
Jenn-Air
JGD8430ADS14
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
KitchenAid
KGCD807XBL00
Cooktop
KitchenAid
KGCD807XSS00
Cooktop
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service