Part Location Diagram of WPW10116789 Whirlpool Folding Tines Sleeve
See part 11 in the diagram
Replacing your Maytag Dishwasher Folding Tines Sleeve
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Folding Tines Sleeve WPW10116789

★★★★★
★★★★★
1 Review

Rated by 10 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 10.70
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11748488
Manufacturer Part Number WPW10116789
Manufactured by Whirlpool for Maytag, Jenn-Air, Amana
Product Description

Folding Tines Sleeve Specifications

Sold Individually. White in color.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Dishwasher Folding Tines Sleeve

Replacing your Maytag Dishwasher Folding Tines Sleeve
Troubleshooting
This part works with the following products:
Dishwasher.
Part# WPW10116789 replaces these:
AP6015215, 9-12710, 912710, W10116789, Y912710
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 10 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Parts broken
installed new parts
Other Parts Used:
Adjustable Peg Clip Rear Fold-Away Tine Front Fold-Away Tine Pivoting Tine Latch Fold Away Tine Clip Folding Tines Sleeve
  • Richard from Tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
0 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing parts for dishwasher
Ordered parts, opened package, installed parts.
Other Parts Used:
Adjustable Peg Clip Front Bowl Tine Rear Bowl Tine Folding Tines Sleeve
  • lowell from dickson, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clips holding folding tines broken
The clips holding the folding tines on the lower rack had broken, so the folding racks were flopping around. I entered the model number an PartSelect popped up exactly the right diagrams to find the parts I needed - I even found the handle for the silverware tray that I didn't know was missing. I ordered before noon, and the parts arrived the next day, all at a very reasonable cost (even shipping!) the parts just snapped in place. I'm very, very pleased.
Other Parts Used:
Adjustable Peg Clip Siverware Basket Handle Folding Tines Sleeve
  • Greg from Towanda, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
65 of 127 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusting Lower Dish Rack
The replacement of the rack was straightforward, but the tower assembly had to be moved to the new rack. The fit is precise and fits only one way. I did break off one tab, but it is held just fine. .
Other Parts Used:
Lower Dishrack with Wheels Folding Tines Sleeve
  • Douglas from Santa Ana, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old parts had worn out
Replaced and repaired in less than five minutes using No tools
Other Parts Used:
Rear Bowl Tine Folding Tines Sleeve Adjustable Peg Clip Front Bowl Tine
  • John from Mission Viejo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
clip on adjustable peg was broken, sleeves were missing
I just snapped out the clips, replaced them with the new clips and sleeves and replaced them. It was a little confusing getting the configuation just right but after that it was a snap.
Other Parts Used:
Folding Tines Sleeve Adjustable Peg Clip
  • Sharon from Lawton, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Some of the fold up/down tines in the lower basket were defective as well as the door handle was broken
The wheels and clip were just snapped in to replace old or missing ones. The door latch required the inside cover of the door assembly to be loosen enough to remove the old latch and replace the new latch.
approximately ten screws were involved.
Other Parts Used:
Folding Tines Sleeve Adjustable Peg Clip Lower Wheel Assembly Latch Handle
  • Manfred from Fredricksburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
70 of 135 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusty RAcks
Was discouraged seeing rust on both upper and lower racks. Remebered prior dishwasher and $300+ estimate for the racks. But the rusty parts were only some of the small moveable parts of the rack. Each one just snapped out, and the replacement snapped in. No tools at all. Five minutes and $55 later the racks looked new.
Other Parts Used:
Folding Tines Sleeve Rear Bowl Tine Front Bowl Tine Rear Fold-Away Tine Single Rack Cap - Light Gray
  • Robert from Escondido, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel had broken off along with the folding tines' clip
All I had to do was to snap the parts into place. I also had someone come here to find a leak in my dishwasher. It was in the latch and seal that kept the soap dispenser closed. They wanted to charge me over $50 when the part only cost less than $9 with shipping. I just ordered it and installed it myself. Piece of cake!
Other Parts Used:
Folding Tines Sleeve Adjustable Peg Clip Lower Wheel Assembly
  • Gina from West Alexandria, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
130 of 254 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking (small puddle)
My dishwasher was leaking a small amount and it seemed to be happening during the last half of the cycle. The insulation at the bottom of the door was wet but not directly under the dishwasher by the motor etc. I tried the door gasket which was a simple 2 minute job but that didn't solve the issue. I took apart the door by removing the seven torx head screws on the inside (don't worry about the metal pieces on the sides with the phillips screws). I could see some white powdery build up and watermarks coming from the soap dispenser area. I thought maybe there was crack in the door. But after taking out the solonoid (it just snaps in and out) I could see light around the little latch that holds the soap dispenser door shut. I tried a bit of caulking but it just fell out after a day or so. Then I found the little grommet on PartsSelect.com. You have to take off a white plastic cover that covers the door latch mechanism - it snaps in and out on one point. A couple screws hold the plastic assembly in place. You can just remove the whole assembly, it doesn't need to be taken apart. Remove the old grey gasket around the latch and put the new one over the latch. It's more like a "boot" like around a shift lever in a car. Put the assembly back in with the latch going through the hole. Make sure the gasket covers the hole. Tighten the screws down, not so much as to tear the gasket but enough to be snug against it. Snap the white cover back on. Snap the solonoid back in place. Put the door back in place. Put the seven screws back in. You're all set - no leaks. The key to troubleshooting was that it started leaking during the rinse cycle after the soap dispenser latch had flipped up exposing the worn boot around the latch.
Other Parts Used:
Folding Tines Sleeve Dispenser Door Latch Grommet Door Gasket
  • Gregg from Woodbury, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
195 of 267 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748488
Manufacturer Part Number: WPW10116789
Brand
Model Number
Description
Amana
DDW2470AWP
Dishwasher - Undercounter
Maytag
DWC7400AAW
Dishwasher
Maytag
DWC7400ABW
Dishwasher
Maytag
DWU6750AAB
Dishwasher
Maytag
DWU6750AAE
Dishwasher
Maytag
DWU6750AAM
Dishwasher
Maytag
DWU7400AAE
Dishwasher
Maytag
DWU7400AAX
Dishwasher
Maytag
DWU7400ABE
Dishwasher
Maytag
DWU7400ABX
Dishwasher
Maytag
DWU7400BAE
Dishwasher
Maytag
DWU7400BAX
Dishwasher
Maytag
DWU7400BBE
Dishwasher
Maytag
DWU7400BBX
Dishwasher
Maytag
DWU7500AAX
Dishwasher
Maytag
DWU7500ABX
Dishwasher
Maytag
DWU7500BAX
Dishwasher
Maytag
DWU7500BBX
Dishwasher
Maytag
DWU7560AAB
Dishwasher
Maytag
DWU7560AAE
Dishwasher
Maytag
DWU7560AAM
Dishwasher
Maytag
DWU7910AAE
Dishwasher
Maytag
DWU7910AAX
Dishwasher
Maytag
DWU7910BAB
Dishwasher
Maytag
DWU7910BAE
Dishwasher
Maytag
DWU7910BAM
Dishwasher
Maytag
DWU8260AAX
Dishwasher
Maytag
DWU8260ABX
Dishwasher
Maytag
DWU8260BAX
Dishwasher
Maytag
DWU8260BBX
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service