This middle spray arm kit includes an upper spray arm, a holder or hanger, water supply tube or delivery tube, split ring seal, and a screw. The function of these parts is to spray water to all levels of the dishwasher so the dishes will come out completely clean. This kit has recently been redesigned. It does not include the upper support or mount, so consider ordering those parts as well if necessary. The spray arm is approximately 18 inches long, and all parts are white in colour. The only tool you will need to complete this repair is a Phillips screw driver.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher Middle Spray Arm Kit
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Will not fill with water
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Greg W - April 3, 2024
Verified Purchase
Great Part - Perfect Fit - Works Great
Easy replacement. Works great. Will deal with Partselect again!
★★★★★
★★★★★
Allan Glover I - November 6, 2023
Verified Purchase
Easy Repair
The repair was very easy, even for someone like me who is all thumbs. The only difference from this repair kit and the original parts is that the screw with the repair kit had a small washer attached. The original was a screw and separate washer that had a much bigger diameter. I had thought about using the original screw and washer, but I went with the new one. All seems to be working well.
★★★★★
★★★★★
Kathleen F - July 14, 2023
Verified Purchase
Easy repair.
A relief to not have to replace the whole dishwasher!! Works great. The only issue I have is that the screw was loose in the bag, got stuck in a corner and being small almost got tossed in garbage. There was no washer and the old washer was on the old screw in such away that it wouldn’t come off and several of us tried. It wouldn’t work on the new part either. Fortunately I had a jar of miscellaneous nuts and bolts and washers and was able to find a washer to fit. Loved the video of the repair.!
★★★★★
★★★★★
Tim L - July 12, 2023
Verified Purchase
Easy install, works great.
Parts delivered on time, fit perfect.
★★★★★
★★★★★
Angla G - June 21, 2023
Verified Purchase
Easy install
The part was an improved design over the original part that broke. Easy to install and works well.
★★★★★
★★★★★
Betty L - April 13, 2023
Verified Purchase
Easy repair for a novice!!
Perfect fit and installed myself!!! Thank you,
★★★★★
★★★★★
TERRY K - April 8, 2023
Verified Purchase
Easy ordering and got my parts
I got what i ordered and the videos that came with it were a great help in replacing the parts. I need one more part though, and if the rep. Would have seen the email I sent with the picture attached, I would have had everything I needed. So, I'll have to place one more order and the job will be complete!
★★★★★
★★★★★
Vicki B - January 30, 2023
Verified Purchase
Easy repair
Worked great.
★★★★★
★★★★★
Michelle B - January 24, 2023
Verified Purchase
Easy to replace
My appliance is back in working condition.
★★★★★
★★★★★
Liza G - December 3, 2022
Verified Purchase
Perfect kit easy to replace
The parts were just what I needed and the video on part select website was soooo easy to follow.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 161 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No water to the upper rack, soap dish not opening properly
Replaced the middle spray arm kit and the upper spray arm mount. Also replaced worn out spring for the soap dish. Now all areas of the dishwasher get cleaned and the soap dispenses correctly every time.
The touch pad insert is just a glorified decal stuck to the front of the door. Peel off the old insert, using a knife to pick up the corner. Then clean away the old adhesive with WD-40 as a cleaner, scraping the surface with the putty knife. Then carefully align and stick on the new insert over the panel having the buttons. That simpl
... Read moree.
The middle spray arm changes out in a jiffy, with just a phillips screwdriver.
The lower spray arm nut was stuck so I used pliers to turn the screw and remove it. While you have the lower spray arm off, clean out food scraps and mineral deposits from the drain. The instructions say that if you remove the pump assembly you will need a new seal, so leave the pump on unless you order the appropriate parts. Clean all surfaces with a cleaner that can remove calcium deposits.
Original supply tube for upper spray assembly disintigrated
Unscrew the top bracket on basket of upper spray arm assembly. Remove entire upper spray arm assembly. Remove old spray arm. Install new spray arm and new supply tube being careful to align the upper bracket with slot on new spray arm and supply tube.
Joanna from Smithtown, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The hose that connected to the middle spray arm was worn and had deteriorated
Easily installed the hose and replaced the middle spray arm with the help of my brother the savior! Lol. It was very easy for him to install.
Removed the top basket and replaced the spray arm kit. Put basket back in. Thanks
Bernard from LEESBURG, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old assembly worn and falling apart.
Retaining clips on upper tray difficult to remove. Easier to replace.
Richard from ROCHESTER, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken upper arm
Removed upper tray, unscrewed upper arm mount. Clipped on new mount screwed middle spray arm to mount, clipped on support mount for arm and inserted spray into hanger. Reinstalled tray and stop clips.
the piece between the rear of the dishwasher and the top sprayer had deteriorated and become non-functioning.
Got the replacement part from Part Select which had been redesigned to include the previously 3 separate parts into 1. FIRST I took a picture of how the old parts were connected up to the other parts. I thought I wouldn't need a new upper sprayer arm but I did; which was why it was included. Don't think that you have extra parts (you d
... Read moreon't). Using a phillips screwdriver removed the old upper sprayer arm assembly. It just falls off, so be prepared to support the underside with your other hand. Also removed rear support hanger. Once off the parts just go back very easily. Just have to watch where you put the new rear support hanger so it doesn't interfere with the upper sprayer arm. Insert the new screw, give the upper sprayer arm a spin to check clearance and you're done. The thing that took me the longest was finding the phillips screwdriver. And...PS - I'm a 68 yr old Grandma
Read less
Marie from HUNTINGTN STA, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Middle arm stray broke away from the sprayer and wall of the dishwahser
The hardest part was getting the clips off the brackets to release the top drawer. Was a super easy project to do myself. I'm a female and if I can do this anyone can. I watched the video that was at the bottom of the parts page when I was deciding what to order. Took less than 15 minutes to do the entire assembly. Now also the unit is
... Read moreall once piece from the sprayer arm to the wall. More slim lined.
Read less
Dava from MIAMI, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
33 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michelle
October 13, 2017
Can i buy just the rubber tube part without buying the spray arm as well?
For model number 16705891
Hello Michelle, thank you for contacting us. The tube part is not sold separately. It is only sold in the kit. Good luck with the repair!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Annette
July 20, 2017
Purchased this part to replace my spray arm and the rest of the assembly. Opened it up and there is no mount in the kit? Is mine missing it or does it not come with it and why wasn’t I warned? Unless this kit has been redesigned and it doesn’t need it? What’s going on?
Hi Annette, this spray arm has been newly designed by the manufacturer and no longer comes with a support. Please let me know if you have any further questions.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Sandy
July 20, 2017
Having a problem with my dishwasher. It isn’t washing. So checked for blockage and replaced both racks because they were getting grimey. What should I check next?
Hello Sandy, we recommend checking to see if the water level inside the dishwasher is low. If it is, you need to replace the water valve. If the water level is normal, you should remove the filters and clean them. If the filters are in bad condition you may need to replace them. Best of luck with this repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Liz
April 25, 2019
Does this kit fit this dishwasher? It is just the rubber tube that needs replacing.... will i need a mount as well or will it fit the current one? there is a screw in the top basket
For model number 665.15801891
Hi Liz, thank you for your question. This part does fit your appliance. If you only need to replace the tube that your spray attaches to, I have linked that part down below for you. Good luck with your repair.
It seems like the dishes on my top rack are not getting fully cleaned but the dishes on the bottom are okay-ish. I haven’t been doing anything differently but I think I have a problem with my dishwasher. Im not experiencing any weird sounds or leaking though.
Hello Crystal, we recommend checking the filters in the bottom of the tub. If your filters are clear it is most likely a problem with the choppers. We will need your model number to know for sure. I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
February 26, 2020
My dishwasher is 22 years old and works well. The tube the upper rack spray arm is on has holes in it and i want to replace that part. Will this kit work for my dishwasher? Thank you!
For model number GU980SCGB0
Hello and thank you for writing.
Yes, this kit PS382824 is in the list of compatible parts for your model number and therefore it should work. We hope this helps. Please contact us anytime if you require further assistance.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Denise
September 2, 2019
Will this fit my Kenmore dishwasher?(665.17033403)
Thank you.
For model number 665.17033403
Hello Denise, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11746192. Hope this helps!
The kit won’t help if the tube doesn’t look the same.
Hi Alice, thank you for following up. This kit works with the model number that you provided. If you did not get your model number directly from your machine then what you gave us could be wrong and showing us parts that do not fit your model. However, if you got your model number directly off your dishwasher, then this kit is what you are looking for and would be guaranteed by your manufacturer to work. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Al
May 23, 2023
Will this upper spray arm part number 675808 fit this dishwasher kenmore ultra wash
For model number 665-16831792
Hi Al, thank you for reaching out. The part mentioned is compatible with your model. We hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
December 28, 2023
Does this kit work for this model
For model number KUDS01DLBL6
Hello Tom, thank you for the question. According to our research, the middle spray arm kit you have mentioned is not compatible with your model. The middle spray arm does not come in a kit. You may need to order the parts separately. The part number for the spray arm tube hanger is PS11745439, for the spray arm manifold is PS11752850, for the spray arm seal is PS11745444, for the middle spray arm is PS11746193, and for the screw is part number PS11753412. We hope this helps!
