Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul S - June 20, 2022
Verified Purchase
Great part, same as OEM and worked great.
This spring fit perfectly on my washer to suspend the tub. It replaced one that had broken. It was pretty difficult at first to get the drum lifted into position to hook the spring in both ends. I ended up putting a folding ladder across the top of the drum and used a ratchet strap to pull the drum up into place. Then I was able to hook the spring easily and it's been working great.
★★★★★
★★★★★
Samuel B - March 2, 2022
Verified Purchase
Easy reoair
Quite expensive for a plastic tube.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Spring broke that holds the drum up.
To put the new spring on requires two people. One to pull the drum up as far as possible and hold it in place and the other to attach the spring to the drum and the into the slot on the side of the washer frame. It takes a lot of leverage and strength to get the spring into the slot. We used a screw driver as leverage to get the spring ex
... Read moretended to slip into the slot. You might also need the plastic holder part# 4930FR3040A. If the washer door boot has come off due to spring breaking, you will need to reset it. That requires also removing front panel. There is a large wire ring that holds the boot in place. You either need a special pair of pliers to expand the spring to reset the boot or a lot of strength to do it with a couple screw drivers.
Read less
Phillip from SOUTH PARK, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 26, 2017
I am looking for the big springs that hold the tub up. One of them broke off. I probably also need new dampers k610? As one is bent. And lastly the little plastic clip thing the spring was sitting on, as it shattered. I can't tell from the picture if the spring k410 is right, but the name spring/hinge doesn't sound right. Thank you
For model number WM3570HVA
Hi John,
Thank you for your inquiry. If your washer is shaking and vibrating then you will need the spring you have referenced in your question to us as well as the rods. I hope this helps. Thank you and have a great day!