Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Elizabeth H - February 11, 2024
Verified Purchase
Great Product, Great How to Videos, Great Experiences
The part was delivered supper fast and was in excellent condition. Received the parts around 1 pm and had the dryer running by 8 pm. Between your sight telling me what could be wrong with my dryer, helping me find the correct parts, fast delivery, and the videos showing me how to install the parts, I was able to get the job completed and have my dryer back in working order within three days of it starting to make that horrible squealing noise. Very impressive, amazing and appreciated by a family of six and a dryer that is working almost non stopped. Thanks again.
★★★★★
★★★★★
Joshua W - July 28, 2023
Verified Purchase
Works as intended
So far so good. I replaced the seal (end of June/beginning of July 2023 currently 7-28-23) and the dryer has been functioning much quieter than before, and as best as I can tell, hasn't been marking up the clothes anymore (the wife hasn't said anything about it). I would suggest for anyone else, I didn't trust the adhesive to hold the felt liner on while trying to stretch it and apply more adhesive so I used some clamps to hold it in place while I worked a little at a time. This was after dry fitting and letting it sit for a little bit to stretch it out and fit better. Really do appreciate the "How-to" videos that Part Select puts out. Showing the simplicity of the fix really helps an anxious person like me.
★★★★★
★★★★★
R. J. S - May 2, 2023
Verified Purchase
Rear Drum Felt Seal Review
The part arrived as scheduled and the supporting email was great. I had found PartSelect video on line to see if replacing it was something I could do. The video was clear and replacement was just as the instructional video indicated. Drying is much faster dying and much quieter when running as a result.
★★★★★
★★★★★
Patrick S - April 12, 2023
Verified Purchase
Just what I needed
Just what I needed
★★★★★
★★★★★
SANDY C - August 26, 2022
Verified Purchase
Perfect parts for repair.
Couldn't be happier.
★★★★★
★★★★★
Joan R - March 23, 2022
Verified Purchase
Perfect
Came fast, was exactly what we needed, and part worked perfectly. Thank You
★★★★★
★★★★★
Mitchell S - February 16, 2022
Verified Purchase
Difficult repair made Easy
The part was in great condition and the instructions were very useful in directing me each step. I am definitely be using PartSelect as a resource for my next job. Thank you!
★★★★★
★★★★★
Michael H - February 16, 2022
Verified Purchase
Watched the video on your site and the repair was just as it showed. No issues, everything was great.
The part was exactly as advertised, the repair was simple and everything is running great. Will definitely come to you first, the next time I need parts.
★★★★★
★★★★★
Michael C - January 24, 2022
Verified Purchase
Easy repair Thanks
Part was in great condition, thanks
★★★★★
★★★★★
Gethyn W - November 18, 2021
Verified Purchase
The right part, good price, and perfect guidance
Replaced the felt seal in our dryer using the video demonstration- great alternative to buying a new dryer!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Tub bumping, shutting itself off after 20 minutes
Watched the videos available. Opened the top and saw tub jumping. Unplugged and removed front panel. Saw tub rollers were broken or melted. Removed tub watched more videos, and installed the felt belt I got from PartsSelect. Trouble removing the tub rollers, but finally got them off. The axles had a sticky residue which I removed wi
... Read moreth 220 grit sandpaper. I installed new rollers I had bought locally. Reassembled dryer. Worked quietly and smoothly, and it no longer shut itself down. Worked well for one day when it started.s loud noise with bumping. I found both rollers had lost their outer rim , and the tub was running on hard plastic and there was sticky residue back on the ankles. I stopped there.
Read less
Kenneth from STONE MTN, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making loud squealing noises
Removed the Lint filter, then lifted top panel and rested the panel against the wall. Disconnected connector attached to the door panel. removed screws, from both side of door panel and lifted door panel up and out.
Moved Idler pulley to the right taking tension off the drum belt, lift the drum out with the drum belt.
... Read more removed old drum felt seal and removed old residual glue, reglued and installed new Rear Drum Felt Seal. Installed new Idler pulley Assembly and reassembled in reverse order.
The issue was I saw pieces of the felt in a load and all fell out a few days later Dryer started to make noce rotating once it got metal to metal stopped immedietly
Followed the video and stopped at each part not one issue very easy repair most difficult was separating the electric from from panel a little tricky to get apart.
Katharine from PERRYSBURG, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terrible noise coming from the rotation of drum
Took apart front of cabinet, set aside. Undid the belt drive. Removed the drum. Noticed rear seal was with large gap where it wore away, causing the lint to leak onto the interior of cabinet. Ordered a new seal, removed old seal, prepped for new seal. Used spring clamp to hold new one on place. Applied the glue to hold seal in place waite
... Read mored 24 hrs to dry. Reinstalled drum, put cabinet back together. Plugged in ran whisper guiet.
Read less
Leo from MERIDIAN, ID
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy
Asking my question on you tube they show me problems and parts to need replace and how do installation.
I removed the top panel, then the front panel. Removed the belt and the drum. Saw what I needed to replace. Ordered the parts then put back together. It was a really easy job.
just remove 4 screws removed the drum and put the affected part and that's it
jose from SANDY SPRINGS, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Felt seal was disintagrating
See video. Two additional tips: When disconnecting the door sensor slide the putty knife under the plastic latch from your right. Use clothespins to hold the felt seal in place during glueing process.
Nicholas from GREENVILLE, IL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run with no heat
I watched all the videos with Steve. He was very helpful in his presentation of the repairs. Due to the age of the dryer every thing was replaced and was very easy to do. Thank you Steve and PartSelect for making these repairs possible and easy
the directions didn't say I needed clips to hold the felt in place while I did the glue
Once I started using a bunch of clothespins to hold the felt in place and then started gluing small sections at a time I was able to complete the task. The glue comes out of the tube very quickly so don't squeeze it a lot.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
15 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
February 9, 2018
Is part number w10612022 (drum felt seal) the seal i would need for my Roper dryer? Thanks
For model number RES7646JQ0
Hello Rebecca, Thank you for your inquiry. This seal is compatible with the model number you supplied and it is the seal that goes at the back of the drum. Hope this helps!
23 people found this helpful.
Was this helpful?
Thank you for voting!
Kara
March 13, 2018
Will this fit my Whirlpool dryer
For model number WED4900XW0
Hi Kara,
Thank you for your question. Yes, this is the correct seal for your model number. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Paul Matharu
February 17, 2018
How to install on this model [600kenmore]
For model number 110.79622800
Hello Paul, Thank you for your inquiry. We have a repair video available for this part on our website and I have included the link here. It is also for a Kenmore model. Hope this helps!
https://www.partselect.com/PS8691753-Whirlpool-W10612022-Drum-Felt-Seal.htm?SourceCode=4&SearchTerm=11079622800&ModelNum=11079622800#RepairVideo
5 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
July 25, 2021
Is the rear drum belt something I can install myself?
For model number LER6620PQ0
Hello Keith, Thank you for the question. We suggest watching the How to Video for the Belt, PartSelect Number PS346995. We hope this helps!
Hello Gerald, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS8691753. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brad
September 4, 2019
What are the product dimensions of this belt seal?
For model number LER8648LW0
Hello Brad, thank you for your question. The diameter of this is 25" and total length is 79". I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill P
August 6, 2019
Will this felt seal belt fit my Kenmore residential dryer #110.77622600?
For model number Part Number PS8691753
Hello Bill, thank you for your question. Yes, the felt seal for your unit is PartSelect Number: PS8691753. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shane
November 23, 2021
How do you know if you need a new felt liner? I have a squeal that I can not seem to pin down. I have cleaned and lubricated the roller pins, I ran the motor without the drum and it was quiet. the bulkhead where the drum rides are shiny smooth.
For model number WED4800BQ0
Hello Shane, Thank you for the question. The Felt will show wear or damage when it needs to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alexander
January 13, 2020
Will this fit a 29 inch drum. Just want to be sure before I order.
For model number 11061402311
Hi Alexander. This part fits your model 11061402311. We do not have the exact specs and dimensions of most of our parts sadly. However basing compatibility on your model number is the best way to guarantee you are ordering the correct part. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kim
September 13, 2021
What is the general appearance of the mark made by faulty belt? We are seeing a cresent-shaped brown mark repeating.
For model number WED8600YW0
Hi Kim,
Thank you for your question. Before we can assist you further, we would need to know where you are seeing these brown marks. If you could resubmit your question with both this information and your model number, we would be happy to help you. If you have any questions, please let us know.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dryer-Seals-and-Gaskets.htm"},{"position":3,"name":"W10612022","title":"W10612022","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
![](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/346995-1-S-Whirlpool-341241-Multi-Rib-Belt-92-1-4-amp-quot.jpg "Multi Rib Belt - 92-1/4" – Part Number: 341241")
